• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.3
• /
• pp.129-144
• /
• 2013

Recognizing a limits on quantitative evaluation of cultural contents' and for its betterment, study aims developing a qualitative evaluation model. For this study, Reception Theory, Semiotics and Psychology were derived for epistemological dimension to contemplate culture contents' essential attribute. To be concrete, cultural contents was examined as experiential products, emotional products, rememberable products and texts. Also, codes of fun, emotion and culture were discussed as intrinsic attributes for cultural contents and how those attributes were expressed or composed in cultural contents was discussed as well. Evaluation items were extracted based on final discussion at the epistemic level, set up the final evaluation model by taking experts' advices on each items. With all those outcomes, qualitative evaluation model for cultural contents was developed. For the importance of each index in the model, priority was granted by weighting on each index. Lastly, evaluation scale was developed for each index. The culture contents' evaluation model developed in study is meaningful not only in drawing qualitative evaluation items of video(image) contents and developing the index and model for the first time, but also its possibility of wide use for other genres.

• Journal of Korean Academy of Nursing
• /
• v.35 no.3
• /
• pp.565-574
• /
• 2005

Purpose: The purpose of this study was to develop a Dan Jeon Breathing Model and to identify effects of the developed Dan Jeon Breathing Model for maintenance and promotion of health and improvement of health problems in middle-aged women. Method: This study was constructed with two procedures. The first procedure was to develop appropriate movements for middle-aged women, performing a focus group discussion and developing a Dan Jeon Breathing Model in qualitative research. The collected data from focus group discussions was categorized for fitting movements. The second procedure was to verify and conclude a Hypothetic Dan Jeon Breathing Model through a quasi-experimental nonequivalent control group pre-post test design. Result: The developed Dan Jeon Breathing Model was composed of 28 preparation movements to accept Ki comfortably, 10 breathing movements to accumulate Ki for activation of metabolic function in organs and 14 finishing movements to transmit activated Ki to organs. It took 40 minutes to do them. In the Second procedure, the score of physical health (t=4.205, p=.000), psycho-social health(t=3.292, p=.002) and physical strength of the experimental group(t=5.905, p=.000) was higher than that of the control group. Conclusion: The Dan Jeon Breathing Model developed in this study is the correct health promotion model for middle-aged women, their demand, developmental traits and health problems.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.8
• /
• pp.606-612
• /
• 2014

Vehicle simulation models for noise and vibration prediction have been developed so far generally in two schemes. One is FE models generally used for problems below 200 Hz such as booming noise, and the other is SEA models for high frequencies of more than 1 kHz, representatively related to sound packages. There have been many researches to develop a simulation model for 200~1000 Hz, so-called mid-frequency region, and this paper shows one practical result that covers the trimmed body of a sedan vehicle. The simulation model is developed based on an FE model, and then FE elements at some areas are substituted with SEA elements to reduce DOFs. SEA panels are described by modal density, radiation efficiency, stiffness and damping characteristics that are found from some numerical assessments. Sound packages are modeled similarly as a conventional SEA model. The results obtained from the hybrid model were compared to experimental results. Predicted pressure and vibrational velocity generally show a good agreement. The developed simulation model and related technology are successfully being used in vehicle development process.

• The Journal of Korean Association of Computer Education
• /
• v.13 no.1
• /
• pp.19-26
• /
• 2010

The purpose of this study is to develop a subject integration robot programming instruction model to improve information gifted elementary students' creativity. For this goal, we have developed a subject integration robot programming instruction model and verified its effectiveness. The developed instruction model was applied to the 5th and 6th grade elementary school students. The developed model was applied to the experimental group and ordinary robot programming instruction model was applied to the comparison group. As a result, the model was significantly enhance students' creative disposition and creative cognitive abilities. According to these results, it has been proved that the subject integration robot programming instruction model is effective to the information gifted elementary students' creative disposition and creative cognition abilities.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.233-242
• /
• 2009

Based on the data obtained from field investigation and soil testing to slope hazards occurrence section and non-occurrence section in crystalline rocks like gneiss, granite, and so on, a prediction model was developed by the use of a decision tree model. The classification standard of the selected prediction model is composed of the slope angle, the coefficient of permeability and the void ratio in the order. The computer program, SHAPP ver. 1.0 for prediction of slope hazards around an important national facilities using GIS technique and the developed model. To prove the developed prediction model and the computer program, the field data surveyed from Jumunjin, Gangneung city were compared with the prediction result in the same site. As the result of comparison, the real occurrence location of slope hazards was similar to the predicted section. Through the continuous study, the accuracy about prediction result of slope hazards will be upgraded and the computer program will be commonly used in practical.

• Korean Journal of Materials Research
• /
• v.24 no.7
• /
• pp.381-387
• /
• 2014

The ${\beta}$-transus temperature in titanium alloys plays an important role in the design of thermo-mechanical treatments. It primarily depends on the chemical composition of the alloy and the relationship between them is non-linear and complex. Considering these relationships is difficult using mathematical equations. A feed-forward neural-network model with a back-propagation algorithm was developed to simulate the relationship between the ${\beta}$-transus temperature of titanium alloys, and the alloying elements. The input parameters to the model consisted of the nine alloying elements (i.e., Al, Cr, Fe, Mo, Sn, Si, V, Zr, and O), whereas the model output is the ${\beta}$-transus temperature. The model developed was then used to predict the ${\beta}$-transus temperature for different elemental combinations. Sensitivity analysis was performed on a trained neural-network model to study the effect of alloying elements on the ${\beta}$-transus temperature, keeping other elements constant. Very good performance of the model was achieved with previously unseen experimental data. Some explanation of the predicted results from the metallurgical point of view is given. The graphical-user-interface developed for the model should be very useful to researchers and in industry for designing the thermo-mechanical treatment of titanium alloys.

• Korean System Dynamics Review
• /
• v.12 no.4
• /
• pp.125-156
• /
• 2011

The information service management models developed thus far have put their focuses mostly on technical dimensions of information systems (IS), finding their rationale from the goods-dominant logic (GDL) that IS as goods has value in itself. Information systems, however, is nothing more than a mechanism by which value is delivered to the users. According to the service-dominant logic (SDL), value is created and determined not at the time serve is made by the providers but at the time it is consumed by the users. The users therefore should be regarded as active value creators not as passive consumers of the value delivered by the providers. Based on the service-dominant logic, DISQM (Dynamic Information Service Quality Model) is developed. DISQM's backbone is designed in causal loop diagrams referring to and reinterpreting in systems thinking the 'Parasuraman, Zeithaml & Berry's GAP Model' and 'SERVQUAL' as an operational tool for the GAP Model, and the main IS success constructs are mapped onto the model exploiting the 'DeLone & MacLean's IS Success Model'. With VENSIM simulation software, this paper also shows how DISQM works in computer-simulation settings. After confirming DISQM's validity with the base simulation run, two scenarios are developed for the exemplary purpose and tested in terms of IS quality, service quality, and net benefits from the service for the public information service. Implications from the simulation runs are also discussed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.244-247
• /
• 2005

Although several artificial disc designs have been developed for the treatment of discogenic low back pain and used clinically, biomechanical change with its implantation seldom studied. To evaluate the effect of artificial disc implantation on the biomechanics of lumbar spinal unit, nonlinear three-dimensional finite element model of L1-L5, S1 was developed and strain and stress of vertebral body and surrounding spinal ligaments were predicted. Intact osteoligamentous L1-L5, S1 model was created with 1-mm CT scan of a volunteer and known material property of each element were applied. This model also includes the effect of local muscles which was modeled with pre-strained spring elements. The intact model was validated with reported biomechanical data. Two models implanted with artificial discs, SB Charite or Prodisc, at L4/5 via anterior approach were also developed. The implanted model predictions were compared with that of intact model. Angular motion of vertebral body, force on spinal ligaments, facet joint contact force with $2\sim12$ Nm flexion-extension moment.

• Advances in concrete construction
• /
• v.10 no.3
• /
• pp.185-193
• /
• 2020

An analytical model is developed in this paper to predict the shear capacity of reinforced concrete (RC) columns with corroded transverse reinforcements. The shear strength model for corroded RC columns is proposed based on modifying the existing strut-and-tie model, which considers the deformational compatibility between truss and arch mechanisms. The contributions to the shear strength from both truss and arch mechanisms are incorporated in the proposed model. The effects of corrosion level of transverse reinforcements are considered in the proposed model through the minimum residual cross-sectional area of transverse reinforcements and the reduction of concrete compressive strength for the cover area. The shear strengths calculated from the developed model are compared with the experimental results from Vu's study (2017), which consisted of RC columns with corroded transverse reinforcements showing shear failure under the cyclic loading. The comparison results indicate satisfactory correlations. Parametric studies are conducted based on the developed shear strength model to explore the effects of column axial loading, aspect ratios, transverse reinforcements and the corrosion levels in transverse reinforcements to the shear strength of RC columns with corroded transverse reinforcements.

• Journal of the Korean Statistical Society
• /
• v.29 no.1
• /
• pp.95-108
• /
• 2000

Consider the oblique factor model X=Af＋$\varepsilon$, with defining relation $\Sigma$=Λ$\Phi$Λ'＋Ψ. This paper is concerned with suggesting an optimal Bayes criterion for determining the number of factors in the model, i.e. dimension of the vector f. The use of marginal likelihood as a method for calculating posterior probability of each model with given dimension is developed under a generalized conjugate prior. Then based on an appropriate loss function, a Bayes rule is developed by use of the posterior probabilities. It is shown that the approach is straightforward to specify distributionally and to imploement computationally, with output readily adopted for constructing required cirterion.