• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.1 no.2
• /
• pp.144-153
• /
• 1991

This study was conducted to evaluate worker exposure to airborne asbestos fibers by industry, and to evaluate polarized-light microscopy for determining airborne asbestos fibers. A total of 11 plants including asbestos textile, brake-lining manufacturing, slate manufacturing, and automobile maintenance shops were investigated. Rsults of the study are summarized as follows. 1. Worker exposure levels to airborne asbestos fibers were the highest in asbestos textile industry, followed by brake-lining manufacturing, slate manufacturing, and automobile maintenance shops, in order. In asbestos textile industry, large variation of asbestos levels was found by plants. The worst plant indicated airborne fiber concentrations in excess of 10 fibers/cc, however, the best plant showed concentrations within 0.50 fibers/cc. 2. Characterization of airborne fibers by industry indicated that fibers from asbestos textile industry were the longest with the largest aspect ratio. Fibers from automobile maintenance shops were the shortest with the smallest aspect ratio. Based on characteristics of fibers and the highest levels of concentrations, it is concluded that workers in the asbestos textile industry are exposed to the highest risk of producing asbestosis, lung cancer, and mesothelioma. 3. Result s obtained using polarized-light microscopy were $43.7{\pm}12.3%$ of the results obtained using phase contrast microscopy. This may be resulted from the worse resolution of polarized-light microscopy than that of phase contrast microscopy. Based on the results, it is recommended that polarized-light microscopy be used for mainly bulk sample analyses and further study be performed to improve the method for determining airborne samples. However, polarized-light microscopy can be used for determining thick fibers.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.4
• /
• pp.415-420
• /
• 2010

This study is focused on the channel design of bipolar plate in the electrode of hydrogen gas generator. The characteristics of hydrogen gas generation was studied in view of efficiency of hydrogen gas generation rate and a tendency of gas flow through the riv design of electrode. Since the flow rate and flow pattern of generated gas in the two phase flow system are the most crucial in determining the efficiency of hydrogen gas generator, we adopted the commercial analytical program of COMSOL MultiphysicsTM to calculate the theoretical flow rate of hydrogen gas from the outlet of gas generator and flow pattern of two phase fluid in the electrode. In this study, liquid electrolyte flows into the bipolar plate and decomposed into gas phase, two phase flow simulation is applied to measure the efficiency of hydrogen gas generation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.2
• /
• pp.221-228
• /
• 1989

The objective of this paper is to develop a numerical technique for analyzing crack driving forces in multi-phase materials. The analysis was based on finite element method coupled with a virtual crack extension technique which is known as the most efficient tool in computational fracture mechanics analysis. The modified J-integral method, proposed by Miyamoto and Kikuchi for the analysis of dual-phase material was carried out by subtracting the J-values for contours surrounding each phase boundary from the J-values for overall contour. It was shown that the proposed numerical procedure, based on the modified J-integral coupled with a virtual crack extension technique, can be used as an effective numerical tool for determining crack driving forces in multi-phase materials.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.09a
• /
• pp.1-20
• /
• 1998

Processing of thin films by chemical vapor deposition (CVD) is accompanied by chemical reactions, in which the rigorous kinetic analysis is difficult to achieve. In these conditions, thermodynamic calculation leads to better understanding of the CVD process and helps to optimise the experimental parameters to obtain a desired product. A CVD phase diagram has been used as guide lines for the process. By determining the effect of each process variable on the driving force for deposition, the thermodynamic limit for the substrate temperature that diamond can deposit is calculated in the C-H system by assuming that the limit is defined by the CVD diamond phase diagram. The addition of iso-supersaturation ratio lines to the CVD phase diagram in the Si-Cl-H system provides additional information about the effects of CVD process variables.

• Journal of Communications and Networks
• /
• v.16 no.6
• /
• pp.583-591
• /
• 2014

In wireless communications, knowledge of the signal-to-noise ratio is required in diverse communication applications. In this paper, we derive the variance of the maximum likelihood estimator in the data-aided and non-data-aided schemes for determining the optimal shrinkage factor. The shrinkage factor is usually the constant that is multiplied by the unbiased estimate and it increases the bias slightly while considerably decreasing the variance so that the overall mean squared error decreases. The closed-form biased estimators for binary-phase-shift-keying and quadrature phase-shift-keying systems are then obtained. Simulation results show that the mean squared error of the proposed method is lower than that of the maximum likelihood method for low and moderate signal-to-noise ratio conditions.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.725-730
• /
• 1996

In this work, the software behavior under memory faults in operation phase is modeled and simulated using the stochastic activity network, generalized stochastic Petri nets. This networks permit the representation of concurrency, timeliness, fault tolerance, and degradable performance of system and provide a means for determining the stochastic behavior of a complex system. We estimate the reliability of an application software in the digitized system in nuclear power plants and show the sensitivity of the software reliability to the major physical parameters which affect the software failure in normal operation phase. We found that the effects of the hardware faults on the software failure should be considered for predicting the software dependability accurately in operation phase.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.2
• /
• pp.95-103
• /
• 1994

The purpose of this paper is to provide the experimenters who use the oblique incidence ultrasonic method for anisotropic elastic constants measurement eith some useful relations. In particular, the equivalence of the times of flight by the energy ad phase velocities, which is key to the oblique incidence method, is proved explicitly. This equivalence greatly simplifies the analysis of immersion measurement results. In oredr to correctly measure the transit time of an immersed sample using the oblique incidence, the receiving transducer should be shifted laterally, and an expression in given for this shift. A method for determining all nine elastic constants of an orthotropic material is briefly described and the measurement results are listed for SiC particulate reinforced A1 matrix composites.

• Archives of Metallurgy and Materials
• /
• v.64 no.3
• /
• pp.883-888
• /
• 2019

439L stainless steel composites blended with fifteen micron SiC particles were prepared by uniaxial pressing of raw powders at 100 MPa and conventional sintering at 1350℃ for 2 h. Based on the results of X-ray diffraction analysis, dissolution of SiC particles were apparent. The 5 vol% SiC specimen demonstrated maximal densification (91.5%) among prepared specimens (0-10 vol% SiC); the relative density was higher than the specimens in the literature (80-84%) prepared by a similar process but at a higher forming pressure (700 MPa). The stress-strain curve and yield strength were also maximal at the 5 vol% of SiC, indicating that densification is the most important parameter determining the mechanical property. The added SiC particles in this study did not serve as the reinforcement phase for the 439L steel matrix but as a liquid-phase-sintering agent for facilitating densification, which eventually improved the mechanical property of the sintered product.

• Journal of Ecology and Environment
• /
• v.32 no.2
• /
• pp.75-81
• /
• 2009

The species composition of the parasitoid complex and the degree of parasitism by each species were analyzed for gypsy moth (Lymantria dispar) populations in the increasing phase. Total of 7,826 mid-late instar larvae and pupae were collected and reared from two collection sites in Gangwon Province, Korea. Two tachinid flies (Blepharipa schineri and Parasetigena silvestris), and the ichneumonid wasp (Coccygomimus disparis) were the most abundant parasitoids, in the order of decreasing importance. Other parasitoids occurring included Coteisa melanoscelus, Cotesia scheaferi, Glyptapanteles liparidis, Brachymeria lasus, and Exorista spp. The low incidence of the NPVirus is hypothesized to be an important factor in determining degree of parasitism rate by P. silvestris and B. schineri, and their relative dominance in the parasitoid complex.

• Journal of the Optical Society of Korea
• /
• v.6 no.3
• /
• pp.108-116
• /
• 2002

Lasing modes of laser-diode-pumped fiber grating lasers are analyzed by coupled-mode theory. First, a power series solution of the coupled-mode equations is derived under the assumption of an exponentially-decreasing longitudinal modal gain profile for a laser-diode-pumped grating section, followed by determination of the transfer matrix for such a section. Based on these results, an eigenvalue equation for oscillation is then derived and solved numerically for the lasing modes of uniform and phase-shifted fiber grating lasers. Comparisons made with the uniform-gain results indicate that, surprisingly, the lasing mode characteristics are not as significantly altered as might be expected in most cases, even for a highly nonuniform gain profile. In the case of a phase-shifted grating, the phase-shift position appears to have a much greater impact on determining the threshold gain, the modal field distribution, and the front-to-back output power ratio.