• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.5
• /
• pp.585-590
• /
• 2011

Accelerometers have been exploited widely in various fields from monitoring vibration of precision machines to detecting an earthquake wave. The precision calibration of the accelerometers is required to maintain the measurement reliability when measuring the vibration of objects with accelerometers for modal analysis. Among evaluation factors for determining sensitivity of accelerometers, phase delay term should be also considered for accurate calibration. In this paper, a new calibration system of accelerometers capable of measuring phase delay as well as magnitude of its sensitivity was proposed and realized in the frequency range of 20 Hz to 5 kHz.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.195-198
• /
• 2005

Using theoretical analysis based on Landau theory, it is shown that only five phenomenological parameters are necessary to describe the twelve bulk elastic constants of a biaxial nematic phase. Further, a simple method for determining the values of these five parameters experimentally is given. Comparison with the values of the well-known splay, twist, and bend elastic constants of the uniaial nematic is made.

• Korean Journal of Veterinary Research
• /
• v.32 no.3
• /
• pp.429-434
• /
• 1992

This study was carried out to develop an effective liquid-phase double antibody enzyme immunoassay for determining of progesterone. The optimum conditions of assay system, 1st and 2nd antibodies, enzyme conjugate, and time reaction were invested. The bovine plasma progesterone level in dairy cattle and korean native bulls were also analyzed. The results obtained were as follows; 1. The reproducibility of petroleum ether was superior to that of ethyl ether as extract solvent of progesterone in plasma. 2. The optimum dilution rate of 1st and 2nd antibody was 30,000 and 10 times, respectively. Affer the reaction of enzyme conjugate to progesterone 1st antibody, and then 2nd antibody competition reaction was enough for over 1hr. 3. Average plasma progesterone level in 4 pregnant and 9 nonpregnant Holstein was $2.5{\pm}0.5$ and $0.7{\pm}0.2ng/m{\ell}$, respectively. Average plasma progesterone level of 10 Korean native bulls was $0.1{\pm}0.001ng/m{\ell}$ From these results, by using liquid phase double antibody enzyme immunoassay for progesterone is applicable to detect of early pregnancy diagnosis, factorial analysis of reproductive disorder, and also reproductive physiological function such as monitoring of cyclicity during the post-partum period.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.827-834
• /
• 2003

기존의 RBF네트웍의 중심 결정에 관한 연구에서는 은닉중의 노드 수(즉 중심의 개수)가 결정되었다는 가정하에 그 위치만을 결정하는 알고리즘들이 개발되었다. 그러나 RBF 네트웍 의 성능과 계산속도는 중심의 개수에도 민감하기 때문에, 중심 위치와 개수의 통합적인 고려가 필요하다. 본 논문에서는 RBF 네트웍의 중심결정에 있어서 그 위치 뿐만 아니라 개수까지 동시에 고려하는 Two-Phase 알고리즘을 제안한다. Two-Phase 알고리즘은 두 단계로 구성된다 찻 번째 단계에서는 Bi-section 방법과 보정된 k-medoid 군집화 기법을 이용하여 네트웍의 최소 중심 개수와 위치를 결정한다. 두번째 단계에서는 RBF 네트웍의 weight를 결정하고 네트웍 설계를 마친다. 제안된 알고리즘을 다양한 수지 예제에 적용한 결과, 중심결정에 관한 기존의 알고리즘에 비해 더 적은 수의 중심으로 더 정확한 예측성능을 보임을 알 수 있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.153-154
• /
• 2005

A high Tc superconducting with a nominal composition of $Bi_2Sr_2Ca_2Cu_3O_Y$ was prepared by the citarte method. The solid precursor produced by the dehydration of the gel at 120$^{\circ}C$ for 12h is not in the amorphous state as expected but in a crystalline state. X-ray diffraction peaks of nearly the same angular position as the peaks of high Tc phase were observed in the precursor. After pyrolysis at 400$^{\circ}C$ and calcination at 840$^{\circ}C$ for 4h, the (001)peak of the high Tc phase was cleary observed. Experimental results suggest that the intermediate phase formed before the formation of the superconducting phase may be the most important factro in determining whether it is easy to form the high Tc phase or not, because the nucleation barriers of the two superconducting phase may be altered by the variation of the crystal structures of those intermediate phase.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.270-271
• /
• 2005

A high Tc superconducting with a nominal composition of $Bi_2Sr_2Ca_2Cu_3O_Y$ was prepared by the citarte method. The solid precursor produced by the dehydration of the gel at $120^{\circ}C$ for 12h is not in the amorphous state as expected but in a crystalline state. X-ray diffraction peaks of nearly the same angular position as the peaks of high Tc phase were observed in the precursor. After pyrolysis at $400^{\circ}C$ and calcination at $840^{\circ}C$ for 4h, the (001)peak of the high Tc phase was cleary observed. Experimental results suggest that the intermediate phase formed before the formation of the superconducting phase may be the most important factro in determining whether it is easy to form the high Tc phase or not. because the nucleation barriers of the two superconducting phase may be altered by the variation of the crystal structures of those intermediate phase.

• Journal of Korean Institute of Industrial Engineers
• /
• v.29 no.2
• /
• pp.172-178
• /
• 2003

In the recent researches, a variety of ways for determining the locations of RBF centers have been proposed assuming that the number of RBF centers is known. But they have also many numerical drawbacks. We propose a new method to overcome such drawbacks. The strength of our method is to determine the locations and the number of RBF centers at the same time without any assumption about the number of RBF centers. The proposed method consists of two phases. The first phase is to determine the number and the locations of RBF centers using bi-section search method and enhanced k-medoids clustering which overcomes drawbacks of clustering algorithm. In the second phase, network weights are computed and the design of RBF network is completed. This new method is applied to several benchmark data sets. Benchmark results show that the proposed method is competitive with the previously reported approaches for center selection.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.29-37
• /
• 2017

Intersection signal's phase time is calculated and determined by car and pedestrian traffic volume. If signal phase time and traffic volume dis-matched, cars and pedestrians have much delay time. This paper suggested an All-Red phase application method that cars and pedestrians securing safety and minimizing traffic signal waiting time. The key solution of this suggested method is determining All-Red phase operation by using sum of spare green time that have no passing cars. That is, total time of spare green time that have no passing cars is longer than All-Red phase time, operating All-Red phase has an effect. And case study carried out at the signalized intersection, revealed that this suggested method has much effectiveness.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.3
• /
• pp.910-932
• /
• 1996

A problem of determining the effective conductivity of a useful model of sphere-matrix type, disordered three-phase composite media is considered. Specifically, a three-phase media in which two-phase composite spheres, consisting of spheres of conductivity $k_2$((phase 2) and concentric shells of conductivity $k_3$(phase 3), are randomly distributed in a matrix of conductivity $k_1$( (phase 1) is considered. As for the structure models configuring three-phase composite media, three different structure models of PCS, PS-1 and PS-2 models are defined, which are analogous to well-established PCS, PS structure models of two-phase composite media. Futhermore, a generalized PS-PCS structure model is proposed to incorporate thesee three different models in one. Effective condectivity $k^{\ast}$of multiphaes composite media is greatly influenced by the phase connectivity of each disspersed phase material, as well as phase conductivities and phase volume fractions. Phase connectivity of three-phase PCS, PS-1, PS-2 composite media is quantified by the impentrability parameter $\lambda$. Mathematically rigorous first-order cluster bounds on $k^{\ast}$ are derived for these models of three-phase composite media, and as computation examples, first-order cluster bounds on $k^{\ast}$ for three-phase composites consisting of largely different phase conductivities are computed and compared as function of concnectivity parpmeter $\lambda$. Results and discussions are given.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.1 no.2
• /
• pp.144-153
• /
• 1991

This study was conducted to evaluate worker exposure to airborne asbestos fibers by industry, and to evaluate polarized-light microscopy for determining airborne asbestos fibers. A total of 11 plants including asbestos textile, brake-lining manufacturing, slate manufacturing, and automobile maintenance shops were investigated. Rsults of the study are summarized as follows. 1. Worker exposure levels to airborne asbestos fibers were the highest in asbestos textile industry, followed by brake-lining manufacturing, slate manufacturing, and automobile maintenance shops, in order. In asbestos textile industry, large variation of asbestos levels was found by plants. The worst plant indicated airborne fiber concentrations in excess of 10 fibers/cc, however, the best plant showed concentrations within 0.50 fibers/cc. 2. Characterization of airborne fibers by industry indicated that fibers from asbestos textile industry were the longest with the largest aspect ratio. Fibers from automobile maintenance shops were the shortest with the smallest aspect ratio. Based on characteristics of fibers and the highest levels of concentrations, it is concluded that workers in the asbestos textile industry are exposed to the highest risk of producing asbestosis, lung cancer, and mesothelioma. 3. Result s obtained using polarized-light microscopy were $43.7{\pm}12.3%$ of the results obtained using phase contrast microscopy. This may be resulted from the worse resolution of polarized-light microscopy than that of phase contrast microscopy. Based on the results, it is recommended that polarized-light microscopy be used for mainly bulk sample analyses and further study be performed to improve the method for determining airborne samples. However, polarized-light microscopy can be used for determining thick fibers.