• Structural Engineering and Mechanics
• /
• v.46 no.1
• /
• pp.39-51
• /
• 2013

An extremum method is presented to predict the wrinkling characteristics of the inflated cone in bending. The wrinkling factor is firstly defined so as to obtain the wrinkling condition. The initial wrinkling location is then determined by searching the maximum of the wrinkling factor. The critical wrinkling load is finally obtained by determining the ratio of the wrinkling moment versus the initial wrinkling location. The extremum method is proposed based on the assumption of membrane material of beam wall, and it is extended to consider beam wall with thin-shell material in the end. The nondimensional analyses show that the initial wrinkling location is closely related to the taper ratio. When the taper ratio is higher than the critical value, the initial wrinkles will be initiated at a different location. The nondimensional critical wrinkling load nonlinearly increases as the taper ratio increases firstly, and then linearly increases after the critical taper ratio. The critical taper ratio reflects the highest load-carrying efficiency of the inflated cone in bending, and it can be regarded as a measure to optimize the geometry of the inflated cone. The comparative analysis shows fairly good agreement between analytical and numerical results. Over the whole range of the comparison, the mean differences are lower than 3%. This gives confidence to use extremum method for bending-wrinkling analysis of inflated conical cantilever beam.

• Journal of The Geomorphological Association of Korea
• /
• v.27 no.4
• /
• pp.89-112
• /
• 2020

The purpose of this study is as follows: First, we restore the optimal topographical environment of the Bronze Age settlements in the Yongdu Stream and its surrounding area in Asan City. Second, we reveal the relative importance of the topographical factors that the Bronze Age people considered when selecting their dwelling locations. We compared and analyzed topographical factors (ridge scale, ridge direction, slope direction of the ridge, micro-landform of the ridge, position of the ridge) from the ridge's environmental perspective of 123 Bronze Age dwellings (hereinafter referred to as dwellings) found in the survey area for that purpose. The results are as follows: First, from a macro perspective, the optimal topographical environment for the location of the Bronze Age settlement is the second ridge that have the E-W direction. And from a micro perspective, it is the southeast direction slope of the Crest slope at the summit. Second, it appears that the Bronze Age people have taken important consideration in determining the location of their dwelling in the following order: ① position (eg. summit), ② micro-landform (eg. Crest slope, Upper slope), ③ slope direction (eg. southward, South, Southeast), ④ scale (eg. sub-ridge, secondary, tertiary), ⑤ direction (eg. E-W, NNE-SSE).

• Journal of KIBIM
• /
• v.11 no.2
• /
• pp.43-53
• /
• 2021

The 'public agency oil joint purchase system' was introduced to lower public sector oil prices and contribute to the stability of the overall consumer oil market. The present study used spatial regression to analyze the factors affecting domestic gasoline price, focusing on the impact of potential implicit collusion among gas stations in determining domestic gasoline prices. Also, this study investigated the effect the location characteristics of the market convention gas stations and government offices on the pressure of price competition in the market and the gasoline price at general gas stations. To summarize the results of the spatial lag model (SLM), the individual characteristics of gas stations such as convenience stores (+), self-fuelling (-), commercial areas (+), subway stations (+), population density (-), and sales (-) are correlated to gasoline prices at gas stations, and the institutional location factors of gas stations (+) affected the average of 9 won per liter, 11 won per liter. In order to solve these problems, the establishment of a monitoring system reflecting the location characteristics of the region and the ongoing review of the system should be carried out. In addition, separate, expanded and promotional measures should be prepared for the convenience of general and public oil buyers.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.4
• /
• pp.235-245
• /
• 2020

The study seeks to identify factors affecting the choice of a university by first-year Business Administration students in Vietnam. Probability sampling is using Stratified sampling of 500 students from five private universities in Ho Chi Minh City surveyed by convenience sampling. This paper employs mixed research methods - measuring Cronbach's Alpha, EFA, Regression and using PATH model - to test the hypotheses of the research model. The results of the study identify five factors: Prestige, Geographical location, Facilities, Attractiveness of the field and Media. All these factors have a positive influence on the standing of the university brand. It means that the higher the Prestige, Geographical location, Facilities, Attractiveness of the field and Media, the higher the university brand. The results indicate that Geographical location is the most influential factor to enhance the private university's brand. Bringing Geographical location is, thus, advisable to enhance a university standing. The brand plays a determining role in students' trust when selecting a university. Media is still the top concern of new students when they choose to study at a university. Media still remains an important consideration for new students when choosing a university. So, this factor should be utilized by universities to enhance their attractiveness.

• Journal of Distribution Science
• /
• v.16 no.9
• /
• pp.35-41
• /
• 2018

Purpose - The purpose of was paper is to do a conceptual analysis of the determination of local superior commodities using the location quotient technique and an analysis of the contribution of superior products to the regional economy. The results of determining superior commodities are used to determine regional product specialization and its contribution to the regional economy. Local superior commodities are dynamic and selected based on the potential to increase regional income. Research design, data, and methodology - This study used location quotient techniques and regional economic analysis with annual data rocks, production data in the agriculture, plantation, fishery and forestry sectors. Local superior commodities are calculated to contribute to regional economists. Result - The findings obtained showed the location quotient technique can determine local superior commodities and local superior commodities contributed positively to the regional economy. The test results were carried out in Jember Regency, East Java Province, Indonesia. Conclusion - The ass well main commodities of Jember Regency are tobacco. Tobacco commodities contribute positively to the regional economy, they were not significantly due to affected by the low of commodity prices in harvest. The low prices indicate the strength of the weak bargaining position of farmers towards the market.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.311-316
• /
• 2004

For the location estimation in the conventional LPMS(Loose Parts Monitoring System), it is popular to employ a group delay among the acoustic sensors installed within a 3 ft range from the impact source. However, there exists inherent error in determining the arrival time differences of the generated wave group among the neighboring sensors. To overcome this problem in this study, the two dimensional approach has been proposed and applied to effectively estimate the arrival time differences by using a continuous wavelet transform which is one of the linear time-frequency analysis methods. The experiment has been performed to both the plate model and the real steam generator in a nuclear power plant. It is expected that the reliability of the location estimation could be enhanced when the proposed time-frequency method is introduced into the LPMS system.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.6
• /
• pp.47-53
• /
• 2004

This paper proposes an algerian for determining robot location using appearance-based paradigm. First, this algorithm compresses the image set using Principal Component Analysis(PCA) to obtain a low-dimensional subspace, called the eigenspace, and it makes a manifold that represent a continuous-appearance function. Neural network is employed to estimate the location of the mobile robot from the coefficients of the eigenspace. Then, Kalman filtering scheme is used for the fine estimation of the robot location. The algorithm has been implemented and tested on a mobile robot system. It is shown that the robot location is estimated accurately in several trials.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.221-227
• /
• 2008

This study identifies the relationship between traffic data quality obtained from loop detectors and their location. Traffic data basically shows traffic flow conditions and thus, these information can be used as inputs for various transportation management strategies. Out study presents how to determine optimal downstream detector location on merging area in order to enhance the effects of ramp metering strategies. Microscopic simulation model, PARAMICS, is used as the main analytical tool. Assuming that detector location relies heavily on traffic flow characteristics in each roadway segment, we perform statistical analysis to identify homogeneous traffic conditions on merging area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.3
• /
• pp.725-735
• /
• 2015

The aim of this study is to specifically understand the officetel market by empirical analysis for the determining factors that affect determining the price of the officetel in Busan. In my opinion, it can help officetel providers to select the appropriate size and location that analysis for the factors determining officetel price with market price, and also it can help customers officetel to choice depending on the purpose. So I was conducting this study. In this study, I analyzes the factors determining the price of Officetel using a OLS linear regression, semi-log model, and a robust regression-Busan area Officetel Real Transaction Price as the dependent variable and factors representing the physical characteristics, locational characteristics and regional characteristics as independent variables.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.5
• /
• pp.51-58
• /
• 2010

This study was done to recommend a method for conserving the habitat of Amblyotropis verna grown naturally in campus of the Kyungpook National University at Daegu city. Vegetation characteristics and morphological characteristics of each individual were analyzed for the condition of the population at the growing season from May to June in 2010. Totally 11 vegetation data were collected and analyzed, and one vegetation community including Amblyotropis verna (Amblyotropis verna-Zoysia japonica community) was found. We found that the growing condition was not good with severe stamping and disturbance. The location-determining method by PCoA analysis showed the physical texture in soil was a critical factor determining the spatial distribution of the Amblyotropis verna-Zoysia japonica community. And the analysis of morphological characteristics found that light condition and soil hardness were the main ecological factor determining the size and form of each individual. Finally, this study recommend that minimizing impacts by human stamping and artificial disturbance and reducing the water stress were the best ways for the conservation of Amblyotropis verna habitats.