• 제목/요약/키워드: Detector materials

검색결과 503건 처리시간 0.024초

적외선 검출기용 맥동관 극저온 냉동기 기술개발 (Development of the Pulse Tube Cryocooler for Infrared Detector)

  • 염한길;박성제;홍용주;고준석;인세환;김효봉
    • 대한기계학회논문집 C: 기술과 교육
    • /
    • 제3권4호
    • /
    • pp.241-248
    • /
    • 2015
  • 국내 사용되고 있는 적외선 검출기 냉각용 스털링 극저온 냉동기는 상당부분 수입에 의존하고 있으며, 높은 대당 가격, 제한적인 수명 및 내구성 부족으로 지속적인 극저온 냉동기 수요가 발생하고 있다. 그런데 적외선 검출기용 극저온 냉동기 기술은 국방, 우주관련 기술로 선진국의 기술이전이나 공동 개발이 매우 제한적이다. 본 연구를 통해 개발하고자 하는 맥동관 극저온 냉동기는 저온구동부의 기계적 피스톤을 가스피스톤으로 대체하고, 압축방식을 선형압축방식으로 바꿈으로써 낮은 진동, 높은 수명 및 내구성을 확보할 수 있다. 이를 통해 맥동관 냉동기의 기술수준을 선진국에 근접시키고, 독자적인 냉각형 적외선 검출기 설계 및 제작기술에 대한 기술을 확보하고자 한다.

Clinical comparison of intraoral CMOS and PSP detectors in terms of time efficiency, patient comfort, and subjective image quality

  • Kamburoglu, Kivanc;Samunahmetoglu, Ercin;Eratam, Nejlan;Sonmez, Gul;Karahan, Sevilay
    • Imaging Science in Dentistry
    • /
    • 제52권1호
    • /
    • pp.93-101
    • /
    • 2022
  • Purpose: This study compared the effectiveness of complementary metal-oxide semiconductors (CMOS) and photostimulable phosphor (PSP) plates as intraoral imaging systems in terms of time efficacy, patient comfort, and subjective image quality assessment in real clinical settings. Materials and Methods: Fifty-eight patients (25 women and 33 men) were included. Patients were referred for a full-mouth radiological examination including 1 bitewing radiograph (left and right) and 8 periapical radiographs for each side (left maxilla/mandible and right maxilla/mandible). For each patient, 1 side of the dental arch was radiographed using a CMOS detector, whereas the other side was radiographed using a PSP detector, ensuring an equal number of left and right arches imaged by each detector. Clinical application time, comfort/pain, and subjective image quality were assessed for each detector. Continuous variables were summarized as mean±standard deviation. Differences between detectors were evaluated using repeated-measures analysis of variance. P<0.05 was accepted as significant. Results: The mean total time required for all imaging procedures with the CMOS detector was significantly lower than the mean total time required for imaging procedures with PSP (P<0.05). The overall mean patient comfort scores for the CMOS and PSP detectors were 4.57 and 4.48, respectively, without a statistically significant difference (P>0.05). The performance of both observers in subjectively assessing structures was significantly higher when using CMOS images than when using PSP images for all regions (P<0.05). Conclusion: The CMOS detector was found to be superior to the PSP detector in terms of clinical time efficacy and subjective image quality.

6MV X-선 검출특성 조사를 위하여 유전체 필름을 이용하여 제작한 평행판 검출기의 유용성 (Feasibility Study of Parallel- Plate Detector Using Dielectric film for 6 MV X-ray)

  • 조문준;김용은;이병용;김정기;임상욱;김현수;김기환
    • 한국의학물리학회지:의학물리
    • /
    • 제15권2호
    • /
    • pp.105-111
    • /
    • 2004
  • 본 연구에서는 의료용 선형가속기로부터 발생되는 명목상 가속전압 6 MV선의 검출특성을 확인하기 위하여 유전체 물질을 사용한 평행판 검출기를 제작하였다. 제작한 검출기의 전극은 단면이 크롬으로 코팅되어 있는 FEP유전체 필름(두께: 100 $\mu\textrm{m}$)을 사용하였고 두 전극 사이에 PTFE유전체 필름(두께 : 100 $\mu\textrm{m}$)을 삽입하였다. 측정을 위하여 선원-팬텀 표면간의 거리 100 cm, 그리고 팬텀의 표면으로부터 깊이 5 cm되는 지점에 방사선 유도전하를 획득하기 위한 제작검출기를 놓았다. 방사선 조사시 제작검출기의 유용성을 알아보기 위하여, 영점 변동, 누설 전류, 인가전압에 따른 검출기의 반응, 재현성, 선형성, 조직최대선량비 등을 측정하였다. 측정결과 검출기의 영점 변동 전류 (I$_{Z}$ )는 8.3 pA, 누설 전류(I$_{I}$)는 10 pA 이었다. 제작 검출기는 인가전압에 대한 선형성을 보였으며, 또한 재현성실험에서는 조사된 선량에 대하여 1% 오차 범위 내에서 일치하였다. 검출기의 선량에 대한 선형성은 3% 이내의 오차범위에서 일치하면서 선량율 의존성이 있음을 확인하였다. 조직최대선량비분포에 대한 제작 평행판 검출기와 비교검출기간의 선량오차는 팬텀내의 최대 선량점으로부터 7.5 cm까지 3% 이내에서 일치하였다. 본 연구결과 유전체 필름을 이용한 평행판 검출기는 선량계로서의 기본적인 특성들을 허용 가능한 범위에서 만족스러워 상대선량측정을 위한 검출기로 사용할 수 있음을 확인할 수 있었다.

  • PDF

8051 마이크로 콘트롤러를 이용한 휴대용 방사능 측정기의 카운터 프로그램 연구 (A Study on the Counter Program of the Radiation Detector Using 8051 Micro-controller)

  • 김용득;박세광
    • 센서학회지
    • /
    • 제6권3호
    • /
    • pp.228-236
    • /
    • 1997
  • 방사성 물질은 인체에 매우 위험하여 정확한 제어와 유출 방지 및 정확한 측정의 필요성이 요구된다. 본 논문에서는 GM 계수기를 사용하여 방사성 물질의 양을 정확히 측정할 수 있는 시스템을 설계하였으며, 계수 프로그램과 측정한 데이터를 저장하거나 외부 장치로 전송향 수 있는 운용 프로그램을 개발하였다. 제작한 시스템과 계수 프로그램은 국내외에서 개발하고 있는 GM 계수관형 방사선 측정기로 원자력 발전소 및 연구소에서 띠러 가지 방식으로 활용될 수 있도록 설계되었다.

  • PDF

ZnS:Ag phosphor를 이용한 hybrid 형 X-ray detector 특성 연구 (The characteristic study of hybrid X-ray detector using ZnS:Ag phosphor)

  • 박지군;강상식;이동길;차병열;남상희;최흥국
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 춘계학술대회 논문집 센서 박막재료 반도체재료 기술교육
    • /
    • pp.27-30
    • /
    • 2002
  • Photoconductor for direct detection flat-panel imager present a great materials challenge, since their requirements include high X -ray absorption, ionization and charge collection, low leakage current and large area deposition. Selenium is practical material. But it needs high thickness and high voltage in selenium for high ionization rate. We report comparative studies of detector sensitivity. One is an a-Se with $70{\mu}m$ thickness on glass. The other has hybrid layer of depositting ZnS phosphor with $100{\mu}m$ on a-Se. The leakage current of hybrid is similar to it of a-Se, but photocurrent is lager than a-Se. Both of them have high spatial resolution, but hybrid has higher sensitivity than a-Se at comparable bias voltage.

  • PDF

Advances in gamma radiation detection systems for emergency radiation monitoring

  • Kumar, K.A. Pradeep;Sundaram, G.A. Shanmugha;Sharma, B.K.;Venkatesh, S.;Thiruvengadathan, R.
    • Nuclear Engineering and Technology
    • /
    • 제52권10호
    • /
    • pp.2151-2161
    • /
    • 2020
  • The study presents a review of research advancements in the field of gamma radiation detection systems for emergency radiation monitoring, particularly two major sub-systems namely (i) the radiation detector and (ii) the detection platform - air-borne and ground-based. The dynamics and functional characteristics of modern radiation detector active materials are summarized and discussed. The capabilities of both ground-based and aerial vehicle platforms employed in gamma radiation monitoring are deliberated in depth.

4분할 광검출기를 이용한 표면 추적 효과의 공초점 현미경 (Scanning confocal microscope of a surface following effect using a quad-detector)

  • 김수철;송장섭;권남익
    • 한국광학회지
    • /
    • 제9권1호
    • /
    • pp.1-4
    • /
    • 1998
  • CD-Player에서 사용되고 있는 4분할 광검출기를 이용하여 작고 간단하며 표면 추적 효과를 가지는 공초점 현미경을 구성하였다. 구성한 공초점 현미경은 4분할 광검출기에서 검출되는 오차 신호의 거리에 따른 변화를 이용하였다. 초점 근처에서 민감하게 변하며 양극성인 성질을 가지는 오차 신호를 이용하여 표면 추적을 하지 않아도 정확한 높이 변화를 알 수 있는 표면 추적 효과를 얻었다. 또한 시료의 높이 차이가 크지 않을 경우 반사 신호를 통하여 재질의 차이까지 알 수가 있다. 구성한 공초점 현미경은 간단한 조작으로 반사 신호를 이용하여 영상을 구현할 수도 있어 두 방식으로 얻은 결과를 비교, 분석하였다.

  • PDF

초전형 적외선식 불꽃감지기의 감도특성 개선 (Improving Sensitivity of the Pyroelectric Infrared Flame Detector)

  • 송현선;이의용
    • 조명전기설비학회논문지
    • /
    • 제29권4호
    • /
    • pp.77-84
    • /
    • 2015
  • PZT ceramics, usually used pyroelectric materials exhibited a relatively highly Curie temperture(Tc) of $250-450^{\circ}C$ and permittivity constant of 500-1600. In this paper, the pyroelectric infrared detectors are applied two different types of pyroelectric materials, that is tetragonal crystal of ferroelectric $PbTiO_3$ and rhombohedral crystal of $Pb(Zr,Ti)O_3$. PZT ceramics shows not only highly Curie temperture but also excellent pyro and piezoelectric properties at the Zr/Ti(=52/48) ratio. Therefor in this paper, the pyroelectric infrared detectors are applied PZT ceramics, and obtained sensitive sensing characteristics by expriment case studies.

실리콘 핀 포토다이오드를 이용한 능동형 방사선 피폭 전자선량계의 구현 (Implementation of Electronic Personal Dosimeter Using Silicon PIN Photodiode)

  • 이운근;백광렬;권석근
    • 제어로봇시스템학회논문지
    • /
    • 제9권4호
    • /
    • pp.296-303
    • /
    • 2003
  • A personal portable type electronic dosimeter using silicon PIN photodiode and small GM tube is recently attracting much attention due to its advantages such as an immediate indication function of dose and dose rate, alerting function, and efficient management of radiation exposure history and dose data. We designed and manufactured a semiconductor radiation detector aimed to directly measure X-ray and v-ray irradiated in silicon PIN photodiode, without using high-priced scintillation materials. Using this semiconductor radiation detector, we developed an active electronic dosimeter, which measures the exposure dose using pulse counting method. In this case, it has a shortcoming of over-evaluating the dose that shows the difference between the dose measured with electronic dosimeter and the dose exposed to the human body in a low energy area. We proposed an energy compensation filter and developed a dose conversion algorithm to make both doses indicated on the detector and exposed to the human body proportional to each other, thus enabling a high-precision dose measurement. In order to prove its reliability in conducting personal dose measurement, crucial for protecting against radiation, the implemented electronic dosimeter was evaluated to successfully meet the IEC's criteria, as the KAERI (Korea Atomic Energy Research Institute) conducted test on dose indication accuracy, and linearity, energy and angular dependences.