• Journal of the Korea Safety Management & Science
• /
• v.13 no.4
• /
• pp.213-223
• /
• 2011

Recent cross-country competition and Chinese steel industry because of the emerging steel industry in Korea is a very difficult situation. Therefore, the steel industry in order to overcome this difficult market environment, the quality, cost competitiveness, enhance customer service levels and enhance international competitiveness through is needed. In this study, the purpose of strengthening the competitiveness of steel companies in order and hit the recovery of raw materials have been developed to optimize the model, developed before and after the results were analyzed. In addition, when applied to other products in order to minimize risk and optimize cutting trial stage of development details of the model is presented in detail. Therefore, the developed model was applied to order the recovery of raw materials hits and significantly improved production planning time has been shortened dramatically. In the present study the contents of other products when properly applied and the competitiveness of companies to improve customer service levels are expected to be helpful.

• Journal of the Korean Home Economics Association
• /
• v.40 no.4
• /
• pp.1-12
• /
• 2002

This study aimed to examine the needs for the planning of group homes for the elderly with dementia in lower income class, who have more economic burden on the caring the demented aged. The survey was conducted by questionnaires collected from 300 respondents from December 2000 to March 2001. Methods of analysis were frequency distribution, mean and chi-square test. The results of this study were as follows: 1) The respondents perceived that the responsibility to take care of the elderly with dementia belonged to their family, not to society or the government, and the sons and daughters had to share the burden placed on care-givers. 2) The awareness of group homes for dementia was relatively low. 3) The respondents' needs for the group homes with dementia could be summarized as follows; small scale plan with homelike atmosphere, a total of 6-8 residents, structural type of detached house or three-storied town house, 2-3 persons per individual room, and management system by non-profit organization or the government. There were no big differences between the respondents of this study and upper and middle class studies conducted by other research, except for some details. Referring to results of this study, it is asserted that group homes for the elderly with dementia would be embraced throughout the country if poetical assistance combined with economic support were provided.

• Journal of the Korean housing association
• /
• v.22 no.2
• /
• pp.73-82
• /
• 2011

Recently, apartments have had several fundamental problems in planning uniformity caused by fixed space programs and difficulties of maintenance. So decision-makings become more important in design process which were essential to performance realization of long-life housing. Therefore, this study aims to analyze the plans of the Bogeumjari Nae-gok based on the applied designs, and suggests improvements for advanced design process of the long-life housing in the domestic market. This research procedure are as follows: (1) Analyze design guide, district land development plan and local code which have influence on design limitation. (2) Compare partial plans of joined designs and analyze each design characters (3) Implement case studies of design process due to design timetable and design elements of Nae-gok. In result, this study suggests significant fundamental materials for advanced decision-making in design process of long-life housing: details credibility and noise control, etc. This research could be useful in making integrated design process applied for long-life housing.

• KIEAE Journal
• /
• v.10 no.6
• /
• pp.105-114
• /
• 2010

As children are known to touch and chew everything, green cleaning procedures are an important step in preventing children from ingesting harmful toxins. The objectives of this study are to develop a new, self-evaluation checklist and to suggest design recommendations which comply with easy, adaptable, economical ways to improve the eco-friendly indoor environment of Korean childcare facilities. The information compiled during this study was collected through literature review and internet surveys1) from July, 2009 to February, 2010. The results of this study show that the current Korean childcare accreditation system and practices emphasize clean building interiors, policies for sanitation and cleanliness, and control of humidity and lighting. On the other hand, the information provided by green-building rating systems from GBCC, LEED, and GBTool offers additional and comparative details regarding indoor environment quality and standards regarding the IAQ performance and management plan, ventilation and thermal comfort systems, views from windows, acoustics, and lighting. In conclusion, this document provides an appropriate and easy-to-follow, self-evaluation checklist composed of eight criteria and 51 practical items. This study also provides the design recommendations composed of 27 practical ideas focusing on interior elements. Both the checklist and design recommendations I have suggested can be a post-occupancy tool for evaluating eco-healthy facility standards as well as tips for continuing to maintain eco-healthy childcare facilities.

• Structural Engineering and Mechanics
• /
• v.41 no.1
• /
• pp.1-24
• /
• 2012

A reinforced concrete (RC) framed structure detailed according to non-seismic detailing provisions as per Indian Standard was tested on shake table under dynamic loads. The structure had 3 main storeys and an additional storey to simulate the footing to plinth level. In plan the structure was symmetric with 2 bays in each direction. In order to optimize the information obtained from the tests, tests were planned in three different stages. In the first stage, tests were done with masonry infill panels in one direction to obtain information on the stiffness increase due to addition of infill panels. In second stage, the infills were removed and tests were conducted on the structure without and with tuned liquid dampers (TLD) on the roof of the structure to investigate the effect of TLD on seismic response of the structure. In the third stage, tests were conducted on bare frame structure under biaxial time histories with gradually increasing peak ground acceleration (PGA) till failure. The simulated earthquakes represented low, moderate and severe seismic ground motions. The effects of masonry infill panels on dynamic characteristics of the structure, effectiveness of TLD in reducing the seismic response of structure and the failure patterns of non-seismically detailed structures, are clearly brought out. Details of design and similitude are also discussed.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.1
• /
• pp.53-62
• /
• 2017

Full embroidery industrial accidents in recent years has shown a declining trend. But disaster embroidery of domestic construction industry were more than 20,000 deaths per year is about 500 people. The government has introduced a construction site often changing the recruitment of new construction based on health and safety as an alternative to road safety education training yisuje of construction workers, daily work periods short. Certificate of Basic OSH Training in Constructions had also been evaluated as successful by reducing the accident rate problem. It is conducted in private educational institutions has occurred on the friction between workers and employers and training costs are difficult to approach workers in the education standards for such facilities due to the superintendent. Educational institutions are institutions that have been caused by excessive competition lowered levels of education. There is also a lack of evaluation that the training is limited to the basic safety knowledge. These details are brought formal safety education purposes only and is introducing the results of other self jyeotgi difficult to reap the proceeds to good effect. In this study, we propose a plan for improving operational problems and enemy status based on research data presented after the Certificate of Basic OSH Training in Construction.

• Korean Journal of Oriental Medicine
• /
• v.9 no.2
• /
• pp.33-43
• /
• 2003

The international government committee is progressing their agreements about intellectual property protection of traditional knowledge(TK), gene resource(GR), folklore(FL) in WIPO. It is in the course of selection with precedence of TK, GR, FL in WIPO, focused on discussions about listing of TK documents, standardization of DB construction, sharing and profit distribution of GR. We made some plans to deal with agreements in WIPO. These plans consist of 5 subjects which are investigation about intellectual property related laws and systems, study of examination and finding, construction of DB information, development of value evaluation system, development of industrialization system with TK, GR, We suggest preceding details about 5 subjects respectively. It is the character of this plan that patent information DB system of TK, GR is the axis. It is the most important thing in these plans to succeed that we have to have connections with expert groups in order parts and government officials, taking whole supports of government because our traditional medical related study basis is weak.

• Journal of the Korean Society for Library and Information Science
• /
• v.37 no.2
• /
• pp.365-385
• /
• 2003

Because the electronic book field tends to be marked by rapid changes, keeping current with the events and the literature can be difficult. The electronic book means for reading on PCs or hand-held devices were also limited by the quality of the screen. The electronic book will survive and reading devices become much cheaper and much better in quality. This paper, based on recent electronic book technologies, addresses some of the issues that are central to the acceptance and integration of electronic book into academic library. It also addresses the current electronic book environment, notes the increasing issues, details the management factors in academic library, and examines potential future electronic book directions.

• Journal of the Korean Society for Library and Information Science
• /
• v.53 no.4
• /
• pp.309-340
• /
• 2019

Although overseas countries have already developed data life cycle for the preservation and curation of data since the 1990s, the research in Korea has been very insufficient. In this study, we analyzed the data life cycles developed in DCC, ICPSR, IWGDD, DataONE, USGS and UKDA to propose data life cycle for efficient management of research data. As a result of the analysis, the common components derived are 'Plan', 'Create & Collect', 'Process', 'Preserve', 'Dispose', 'Access & Use', 'Describe', 'Assure' and 'Backup & Secure'. In addition, the nine components were subdivided into stages to describe the details to be carried out at that stage. It is expected that the content of this study will be applicable in the future development of data life cycle for research data management in Korea.

• Steel and Composite Structures
• /
• v.9 no.4
• /
• pp.325-348
• /
• 2009

This paper is concerned with steel-concrete composite plate girders curved in plan. At the design stage these girders are assumed sometimes to act independent of the deck slabs resting on them in order to simplify the analysis. The advantage of composite action between the steel girders and concrete deck is not utilized. Finite element modeling of such composite action in plate girders is considered in this paper. Details of the finite element modeling and the non-linear analysis of the girders are presented along with the results obtained. Tension field action in the web panels similar to those observed in the straight plate girders is also noticed in these girders. Finite element and experimental results in respect of curved steel plate girders and straight composite plate girders tested by other researchers are presented first to assess the accuracy of the modeling. Effects of parameters such as curvature, steel flange width and web panel width that affect the behavior of composite girders are then considered in the analyses. An approximate method to predict the ultimate strength of horizontally curved composite plate girders is also presented.