• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.87-93
• /
• 2013

In this research, a new methodology to perform building energy analysis using Industry Foundation Classes (IFC) standard has been studied. With the help of Archicad 14 modeling software, a 3D test model is generated and then exported to IFCXML format. A ruby code program retrieves the building information from the resulting IFCXML file using Nokogiri library. An INP file is created and gets ready for next energy analysis step. DOE 2.2 program analyzes the INP file and gives a detailed report of the energy cost of the building. Case study shows when using the IFC standard method, the Interoperability of the energy analysis is greatly improved. The main stream 3D building modeling software supports IFC standard. DOE 2.2 is able to read the INP file generated by IFC file. This means almost any 3D model created by main stream modeling software can be analyze in terms of energy cost Thus, IFC based energy analysis method has a promising future. With the development and application of IFC standard, designers can do more complex and easy-to-run energy analysis in a more efficient way.

• Publications of The Korean Astronomical Society
• /
• v.12 no.1
• /
• pp.167-172
• /
• 1997

Detailed low spectral resolution observations of the spectrum have been made for three early spectral type standard stars, HR718, HR1544, HR3454, respectively, for the wavelength region 4,300 A to 7,500 A, using the Bohyunsan Optical Astronomy Observatory (BOAO) Middle- Dispersion Spectrograph. These standard stars were chosen from well-known bright northern standard stars. All of the observed long slit spectral data has been reduced and analyzed using the IRAF reduction procedure. The derived extinction coefficients are compared with the other observatory result. The derived value can be used in the determination of flux calibration of BOAO spectroscopic observation. However, until the high quality data are secured from a new series of observation in the blue region and are re-analyzed together, the extinction coefficients below the 4,000 A wavelength remains unknown.

• Journal of Engineering Education Research
• /
• v.20 no.4
• /
• pp.3-11
• /
• 2017

In this study, more than 2,500 cases using TRIZ methodology for 10 years from 2006 to 2016 in S company were analyzed to identify which TRIZ tools have been used for solving field problems. In the previous studies, some attempts were made to analyze the utilization of TRIZ tools, but all of them were based on very limited surveys or cases. The results of this study show that 40 inventive principles were most used, followed by separation principles, standard solutions, trimming, modeling using little people, patterns of evolution, ARIZ and Effects. In addition, detailed analysis were performed for widely used tools such as 40 inventive principles, separation principles, standard solutions, etc. The analysis would be a useful guide for the study and application of TRIZ tools in industry.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.32-33
• /
• 2017

As the era of e-navigation begins, the significance of harmonized collection, exchange, and integration of marine information conventional "ship-to-ship" and "ship-to-shore"/"shore-to-ship" has become more significant in ensuring safety and security at sea. This research aims to provide an internationally applicable list of Standard e-Navigation Phrases (SENP ) for communication in the e-Navigation environment, along with practical approaches to this. For this purpose, the importance of standardized communication phrases specific to e-Navigation will first be illustrated. In order to approach the e-Navigation phrases in a practical and pragmatic manner, means of compiling and processing authentic VHF linguistic data accumulated from one of the Korean ports, Ulsan, will be detailed. In addition, major outcomes to be considered in designing SENP will be suggested. Finally, future actions and a joint effort for the standardization of e-Navigation phrases among stakeholders will be sought.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1512-1519
• /
• 2005

In this study, the potential for liquefaction in the Incheon international airport was calculated by appling the standard penetration test data and laboratory test data to the modified Seed & Idriss(2001) method. The analysis was performed on the non-plastic silty layer and silty sand layer which within the depth of 20m, below 20 of the standard penetration value(N), and the ground water level. Also, each set of data was mapped by using GIS(geographic information systems) and the factor of safety for the potential for liquefaction was obtained by overlapping those layers. As a result, it was found that there exist potential hazard zone for the liquefaction partially. So, the additional detailed assessments for those are thought to be necessary.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.1085-1092
• /
• 2003

Proposed in this paper is a standard-compliant business process modeling tool which is based on the UML(Unified Modeling Language) activity diagram and produces an XPDL(XML Process Definition Language) file as an output. The XPDL is a standard process definition exchange format by WfMC(Workflow Management Coalition). To develop an UML/XPDL-based modeling tool, the mapping of modeling elements between activity diagram and XPDL format is conducted after the detailed analysis of each modeling specification. As a result of this mapping, it is revealed that modeling elements of each activity diagram and XPDL must be expanded. So new modeling elements are identified and added to each specification. Based on this mapping, the prototype system is developed, and the usefulness of the developed system is shown through the case study.

• Journal of Auto-vehicle Safety Association
• /
• v.12 no.3
• /
• pp.27-33
• /
• 2020

In this paper, the process of predicting efficient durability performance for vibration durability test of automobile parts using vibration test load on automobile fuel tank is presented. First of all, the common standard load that can be applied to the initial development process of the automobile was used for the fuel tank and the vulnerability of the fuel tank to the vibration fatigue load was identified through frequency response analysis. In addition, the vulnerability of the fuel tank was re-enacted through vibration durability test results, and the scale factor was applied to the standard load. In order to predict the vibration durability performance required for detailed design, vibration fatigue analysis was performed on the developed vehicle with the frequency of vibration severity equivalent to the durability test, and the vulnerability and life span of the fuel tank were identified through the process of applying weights to these selected standard loads, thereby reducing the test time of the development vehicle.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.659-662
• /
• 2006

Plant industry is very important industry that dominate 70% of standard foreign countries construction acceptance an order woe 2004 years. Technique of plant industry is state that secure part equipment connection detailed design and construction class' competitive power. But, high added value creation among plant industry need technique elevation because available plan, basic design technology is insufficient. Therefore, high added value creation wishes to present problem of standard code and improvement direction for plant design to improve available plan, basic design technology competitive power.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.05a
• /
• pp.103-105
• /
• 2006

The revised legislation is introduced that the extension of the balcony area for the apartment houses is allowed. In the past the tenants had to install them illegally by themselves when they wanted to extend their balcony. We have reviewed the standard of the balcony's windows to be set up for them because the contractors can construct the exterior windows. At present, the detailed capacity standard for them is not established Of course some items of them are classified within five capacities among the KS standards. But the standard of the extensional balcony windows are not defined. Therefore this study is aimed at setting up the criteria of the noise, insulation and leak for the window system in expanding the balcony area and adopting it into window's works.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.195-198
• /
• 2009

In this paper, regulation for form work in standard specification among Korea and foreign countries are studied and compared. Within the scope of this paper, regulation regarding fabrication of form and form removal are mainly focused on. Standard specification prescribed by construction temporary equipment association provides detailed regulations and well arranged. ACI 347-04, CEB-FIP and BS EN 13670 had different style and scope compared to domestic specification. Especially, regulation for form removal in ACI prescribed in terms of minimum period.