• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.364-367
• /
• 2011

The development of the DCS thrust unit during the attitude control thruster of the launch vehicle and guided missile is introduced. The DCS thrust unit using solid propellants based on a two-axis control is designed and through the thermo-structural and flow analysis is designed in detail. The performance of the thrust unit based on the detail design is demonstrated through a combustion test.

• Steel and Composite Structures
• /
• v.17 no.4
• /
• pp.387-403
• /
• 2014

This paper presents a high accuracy Finite Element approach for delamination modelling in laminated composite structures. This approach uses multi-layered shell element and cohesive zone modelling to handle the mechanical properties and damages characteristics of a laminated composite plate under low velocity impact. Both intralaminar and interlaminar failure modes, which are usually observed in laminated composite materials under impact loading, were addressed. The detail of modelling, energy absorption mechanisms, and comparison of simulation results with experimental test data were discussed in detail. The presented approach was applied for various models and simulation time was found remarkably inexpensive. In addition, the results were found to be in good agreement with the corresponding results of experimental data. Considering simulation time and results accuracy, this approach addresses an efficient technique for delamination modelling, and it could be followed by other researchers for damage analysis of laminated composite material structures subjected to dynamic impact loading.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.3
• /
• pp.238-245
• /
• 2004

This paper describes an architecture information management system using XML. The purpose of the system is to manage the information stored in standard format, XML, that has many valuable properties. The proposed architecture information consists of project information, drawing information, and material information. Each information is expressed using XML and for each information, XML schema is presented in this paper. In this system, detail information of materials that exists on the supplier's homepage can be displayed when the user of the system wants to check the detail information. Also, drawings stored in STEP data can be browsed in this system. The reports of each information are prepared using XSL. The proposed system shows that XML can be used for a format to store architecture information and various functions can be implemented based on XML related standards.

• Journal of Industrial Technology
• /
• v.31 no.B
• /
• pp.99-105
• /
• 2011

Recently, smartphones have been widely used in wireless communications which caused severe data overload in cellular networks. Cellular companies consider increasing wireless data capacity in overloaded areas. Determining overloaded areas is mainly made from user reports which are currently collected by calling or simple apps by some active users experiencing overloads. Since the current reporting method is inconvenient and does not contain detail information about the overload conditions, and therefore is used by only some active users, the overloaded areas determined from the reports are not likely to be accurate. Therefore, we need a new reporting method which is convenient enough for even inactive users to willingly report the overload condition and which delivers detail information about the overloads. In this paper, we design and implement a measurement function of smartphone's WCDMA communication quality including overload condition and management system of mobile wireless communication networks about smartphones' communication quality.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.1
• /
• pp.10-18
• /
• 2006

This article is concerned with the overview of the activated carbon fibers. Firstly, this review provides a comprehensive survey of the overall processes for the synthesis of the activated carbon fibers from the carbonaceous materials. Subsequently, the physicochemical properties such as pore structures and surface oxygen functional groups of the activated carbon fibers were discussed in detail. Finally, as electrochemical applications of the activated carbon fibers to electrode materials for electric double-layer capacitor (EDLC), the electrochemical characteristics of the activated carbon fiber electrodes and the various methods to improve the capacitance and rate capability were introduced. In particular, the effect of pore length distribution (PLD) on kinetics of double-layer charging/discharging was discussed based upon the experimental and theoretical results in our work. And then we discussed in detail the applications of the activated carbon fibers to adsorbent materials for purification of liquid and gas.

• Speech Sciences
• /
• v.14 no.4
• /
• pp.7-24
• /
• 2007

This paper discusses some current issues regarding how prosodic structure is manifested in fine-grained phonetic details, how prosodically-conditioned articulatory variation is explained in terms of speech dynamics, and how such phonetic manifestation of prosodic structure may be exploited in spoken word recognition. Prosodic structure is phonetically manifested in prosodically important landmark locations such as prosodic domain-final position, domain-initial position and stressed/accented syllables. It will be discussed how each of the prosodic landmarks engenders particular phonetic patterns, ow articulatory variation in such locations are dynamically accounted for, and how prosodically-driven fine-grained phonetic detail is exploited by listeners in speech comprehension.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.161-166
• /
• 2000

To save efforts for capping in the compressive strength tests of concrete, unbonded capping system has been standardized by ASTM C 1231 and AS 1012.9, respectively. These standards, however, do not sufficiently give a full detail of accessories such as steel retaining cap and rubber pad, especially hardness of rubber. Hence, without testing for sizes of steel retaining cap and rubber pad, tests for the quality control of rubber pads were conducted in detail according to Japanese studies. Based on tests, the range of hardness for rubber pad by the compressive strength(200~ 400kgf/$\textrm{cm}^2$) of concrete has been proposed and the guideline of reuses of a rubber pad is described.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.207-210
• /
• 2003

As reviewing of current trend on PC connection details, owing to effective stress transfer in the connection, it grow to increase that use of mechanical splices, reinforcements or welded splices, and prestressing. However such devices as reinforcement, mechanical splices entail not only more cost resulted from materials but also extra construction process so as to cause PC used method to lower competition against conventional method. Therefore more enhanced connection details which help working process simplified and construction cost reduced. In this research, as replace 9.3mm 7strand for reinforcement, it is attempt to devise connection detail which makes workability improve and confirm effective stress transfer in the region of connection. The experimental research is proceeded by partial tension test of specimen. The splice lengths of 7strand is decided to be variations. The flexural capability is verified to depend on spice length. An an appropriate splice length could be also determined as a precedent research on improving PC connection detail.

• International Commerce and Information Review
• /
• v.9 no.1
• /
• pp.297-312
• /
• 2007

The GUIDEC I was published in November 1997 by the International Chamber of Commerce (ICC) and then the GUIDEC was published in October 2000 in the name of GUIDEC II. The GUIDEC II is the next version of GUIDEC I. This paper examines the electronic authentication and certification practices under GUIDEC II in detail. Therefore, this paper can help parties concerned to understand electronic authentication and certification practices of electronic commerce. GUIDEC II maintains the content of GUIDEC I, but GUIDEC II adds some new definitions such as authenticating a message and explains the rights and responsibility of subscribers, certifiers, and relying parties in detail. The aim of the GUIDEC II is to enhance the ability of international business community to execute trustworthy digital transactions utilizing legal principles that promote reliable digital authentication and certification practice.

• Journal of information and communication convergence engineering
• /
• v.15 no.2
• /
• pp.131-136
• /
• 2017

Chest X-ray image cannot be focused in the same manner as optical lenses and the resultant image generally tends to be slightly blurred. Therefore, appropriate methods to improve the quality of chest X-ray image have been studied in this paper. As the frequency domain filters work well for slight blurring and moderate levels of additive noises, we propose an algorithm that is particularly suitable for enhancing chest image. First, the chest image using Gaussian high pass filter and the optimal high frequency emphasis filter shows improvements in the edges and contrast of the flat areas. Second, as compared to using histogram equalization where each pixel of chest image is characterized by a loss of detail and much noises, in using fuzzy logic, each pixel of chest image shows the detail preservation and little noise.