• Parasites, Hosts and Diseases
• /
• 제38권4호
• /
• pp.267-273
• /
• 2000

We report 5 cases of ocular toxocariasis in Korean adults complaining of visual impairment along with floating or bubbling sensation. Fundoscopic examination revealed a retinal detachment along with exudate in 4 cases. They all showed typical reaction by ELISA and immunoblot against Toxocra excretory-secretory antigen. One case showed high level of anti-Toxocara IgE antibodies (34.000 Toxocara units/L) as well as increased level of serum total IgE antibodies and the specific IgE antibodies for 3 inhalant antigens, suggesting that high level of anti-Toxocara IgE antibodies was associated with an atopic status. Clinical manifestations were improved after the sequential use of steroids then mebendazole. We also suggest that ocular toxocariasis should be thoroughly investigated even when an evocative uniocular inflammatory lesion is encountered in peripheral retina without a systematic disease.

• 한국군사과학기술학회지
• /
• 제18권2호
• /
• pp.139-145
• /
• 2015

In this paper, the flexible piezoelectric nanocomposite generator(NCG) device based on $BaTiO_3$ nanostructures was fabricated via simple and low-cost spin coating method. The $BaTiO_3$ nanostructures synthesized by self-assembly reaction showed dendrite morphologies. To produce the piezoelectric nanocomposite(p-NC layer) which acts as an electric energy source in NCG device, the piezoelectric nanopowders($BaTiO_3$) were dispersed in polydimethylsiloxane(PDMS). Sequently, the p-NC layer was inserted in two dielectric layer of PDMS; these layers enabled the NCG device flexibility as well as durability prohibiting detachment(exfoliation) for significantly mechanical bending motions. The fabricated NCG device shows average maximum open circuit voltage of 6.2 V and average maximum current signals of 300 nA at 20 wt% composition of $BaTiO_3$ nanostructures in p-NC layer. Finally, the flexible energy harvester generates stable output signals at any rate of frequency which were used to operate LCD device without any external energy supply.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.484.2-484.2
• /
• 2014

There are many efforts to improving the power conversion efficiencies (PCEs) of dye-sensitized solar cells (DSCs). Although DSCs have a low production cost, their low PCE and low thermal stability have limited commercial applications. This study describes the preparation of a novel multifunctional polymer gel electrolyte in which a cross-linking polymerization reaction is used to encapsulate $TiO_2$ nanoparticles toward improving the power conversion efficiency and long-term stability of a quasi-solid state DSC. A series of liquid junction dye-sensitized solar cells (DSCs) was fabricated based on polymer membrane encapsulated dye-sensitized $TiO_2$ nanoparticles, prepared using a surface-induced cross-linking polymerization reaction, to investigate the dependence of the solar cell performance on the encapsulating membrane layer thickness. The ion conductivity decreased as the membrane thickness increased; however, the long term-stability of the devices improved with increasing membrane thickness. Nanoparticles encapsulated in a thick membrane (ca. 37 nm), obtained using a 90 min polymerization time, exhibited excellent pore filling among $TiO_2$ particles. This nanoparticle layer was used to fabricate a thin-layered, quasi-solid state DSC. The thick membrane prevented short-circuit paths from forming between the counter and the $TiO_2$ electrode, thereby reducing the minimum necessary electrode separation distance. The quasi-solid state DSC yielded a high power conversion efficiency (7.6/8.1%) and excellent stability during heating at $65^{\circ}C$ over 30 days. These performance characteristics were superior to those obtained from a conventional DSC (7.5/3.5%) prepared using a $TiO_2$ active layer with the same thickness. The reduced electrode separation distance shortened the charge transport pathways, which compensated for the reduced ion conductivity in the polymer gel electrolyte. Excellent pore filling on the $TiO_2$ particles minimized the exposure of the dye to the liquid and reduced dye detachment.

• 한국표면공학회지
• /
• 제49권4호
• /
• pp.331-338
• /
• 2016

In this work, anodic oxidation behavior of AZ31 Mg alloy was studied as a function of $Na_2CO_3$ concentration in electrolyte by voltage-time curves and observation of surface appearances and morphologies after the anodic treatments, using optical microscopy and confocal scanning laser microscopy (CSLM). The voltage-time curves of AZ31 Mg alloy surface and surface appearances after the anodic treatments showed three different regions with $Na_2CO_3$ concentration : region I, below 0.2 M $Na_2CO_3$ where shiny surface with a number of small size pits; region II, between 0.4 M and 0.6 M $Na_2CO_3$ where dark surface with relatively low number of large size burned or dark spots; region III, more than 0.8 M $Na_2CO_3$ where bright surface with or without large size dark spots were obtained. The anodically treated AZ31 Mg alloy surface became significantly brightened with increasing $Na_2CO_3$ concentration from 0.5 M to 0.8 M which was attribute to the formation of denser and smoother surface films. Pits and porous protruding reaction products were found at relatively large size and small size spots, respectively, on the AZ31 Mg alloy surface in low concentration of $Na_2CO_3$ less than 0.2 M. The formation of pits is attributed to the result of repetition of the formation and detachment of porous anodic reaction products. Based on the experimental results obtained in this work, it is concluded that more uniform, denser and smoother surface of AZ31 Mg alloy could be obtained at more than 0.8 M $Na_2CO_3$ concentration if there is no other oxide forming agent.

• 방사성폐기물학회지
• /
• 제13권3호
• /
• pp.235-242
• /
• 2015

본 연구에서는 파이로프로세싱에서 발생하는 배기체 내 요오드 포집을 위한 매질로서 고가의 은 기반 흡착제를 대체하기 위한 상용 구리메쉬의 가능성에 대해 연구하였다. 열역학적 계산을 통해 구리 금속과 요오드 기체의 반응은 100 ~ 500℃ 온도 범위에서 자발적으로 일어나며 요오드화구리(CuI)를 형성할 것으로 예상되었다. 실험을 통해 반응 온도에 따른 요오드 포집 효율의 영향을 분석한 결과, 1개의 구리메쉬(질량 0.26 g)를 이용하여 반응 온도를 300, 400℃로 변화하였을 때 각각 5 및 6 wt%의 요오드(초기질량 2.0 g)가 포집됨을 확인하였다. 또한, 반복 실험 결과를 토대로 구리메쉬 표면에 형성된 반응 생성물(CuI)의 자발적인 탈리 현상으로 구리의 활용률이 증가할 수 있음을 확인하였다. 반응 생성물의 CuI 상 형성은 X-선 회절 실험을 통해 확인하였으며, 표면 분석은 주사전자현미경을 이용하여 수행하여 그 결과를 보고하였다.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1994년도 춘계학술대회 and 제3회 신약개발 연구발표회
• /
• pp.260-260
• /
• 1994

Mammalian pyruvate dehydrogenase complex(PDC) enzyme consists of multiple oopies of three major oligomeric enzymes-El, E2 E3. And protein X is one of the enzymatic constituents which is tightly bound to E2 subunit This complex enzyme is responsible for the oxidative decarboxylation of pyruvate producing of acetyl CoA which is a key intermediate for the entry of carbohydrates into the TCA cycle for its complete metabolic conversion to CO$_2$. And the overall activity of the complex enzyme is regulated via covalent nodification of El subunit by a El specific phosphatase ad kinase. Protein X has lipoyl moiety that undergoes reduction and acetylation during ezymatic reaction and has been known h be involved in the binding of E3 subunit to E2 core and in the regulatory activity of kinase. The purification of protein X has not been achieved majorly because of its tight binding to E2 subunit The E2-protein X subcomplex was obtained by the established methods and the detachment of protein X from E2 was accomplished in the 0.1M borate buffer containing 150mM NaCl. During the storage of the subcomplex in frozen state at -70$^{\circ}C$, the E2 subunit was precipitated and the dissociated protein X was obtained by cntrifegation into the supernatant The verification of protein X was accomplished by (1)the migration on SDS-PAGE, (2)acetylation by 〔2$\^$-l4/C〕 pyruvate, and (3)internal amino acid sequence analysis of tryptic digested enzyme.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권17호
• /
• pp.7943-7957
• /
• 2015

Background and Aims: Colorectal cancer is one of the leading causes of death in the world. The aim of this study was to investigate the growth-suppression potentiality of a crude saponin extract (CSENS) prepared from medicinal herb, Nigella sativa, on human colon cancer cells, HCT116. Materials and Methods: HCT116 cells were subjected to increasing doses of CSENS for 24, 48 and 72 h, and then harvested and assayed for cell viability by WST-1. Flow cytometry analyses, cell death detection ELISA, fluorescent stains (Hoechst 33342 and acridine orange/ethidium bromide), DNA laddering and comet assays were carried out to confirm the apoptogenic effects of CSENS. Luciferase reporter gene assays, quantitative reverse transcription-polymerase chain reaction and Western blot analyses were performed to assess the impact of CAERS and CFEZO on the expression levels of key regulatory proteins in HCT116 cells. Results: The results demonstrated that CSENS inhibited proliferation and induced apoptosis. Apoptosis was confirmed by flow cytometry analyses, while CSENS-treated cells exhibited morphological hallmarks of apoptosis including cell shrinkage, irregularity in cellular shape, cellular detachment and chromatin condensation. Biochemical signs of apoptosis, such as DNA degradation, were observed by comet assay and gel electrophoresis. The pro-apoptotic effect of CSENS was caspase-3-independent and associated with increase of the Bax/Bcl-2 ratio. CSENS treatment down-regulated transcriptional and DNA-binding activities of NF-${\kappa}B$ and AP-1 proteins, associated with down-regulation of their target oncogenes, c-Myc, cyclin D1 and survivin. On the other hand, CSENS up-regulated transcriptional and DNA-binding activities of Nrf2 and expression of cytoprotective genes. In addition, CSENS modulated the expression levels of ERK1/2 MAPK, p53 and p21. Conclusions: These findings suggest that CSENS may be a valuable agent for treatment of colon cancer.

• 청정기술
• /
• 제10권4호
• /
• pp.195-201
• /
• 2004

기능성 고분자와 셀룰라아제가 화학적으로 결합된 수식 셀룰라아제를 이용하여 폐신문용지(Old Newsprint, ONP)의 탈묵공정에 적용하였다. 수식 셀룰라아제 중의 셀룰라아제는 섬유의 피브릴화(fibrillation)를 촉진시켜 잉크입자의 박리를 향상시켰으며, 수식 셀룰라아제 중의 수식 고분자가 탈묵공정에서 분리된 잉크입자를 부상제거하는 새로운 탈묵 공정이 완성되었다. 수식 셀룰라아제를 이용한 공정은 극소량의 수식 셀룰라아제의 사용으로 인장강도, 백감도(brightness), 백색도(whiteness)를 포함한 물리적 성질을 기존 탈묵공정에서의 그것보다 향상시켰다. 잉크와 섬유의 결합은 저장 기간이 증가함에 따라 더욱 강해지고, 기존의 방법으로는 잉크입자 제거가 어려운 반면, 수식 셀룰라아제를 이용한 공정은 잉크입자 제거에 매우 탁월한 효과를 나타내었고, 약 1년간의 보존 기간을 가진 폐신문용지의 탈묵 효과를 41% 향상시켰다. 또한 이 공정은 황변현상을 제거했으며, 섬유의 피브릴화를 촉진시켜 재생지의 물리적 성질인 인장강도와 내부결합도를 향상시켰다.

• 한국동물학회지
• /
• 제38권4호
• /
• pp.514-522
• /
• 1995

생쥐 정자의 수정능력 획득과정 및 첨체반응을 전후로 정자표면과 albumin의 상호작용을 조사하였다. 부정소 정자를 체외에서 배양하는 과정에서 정자표면에서 이탈된 단백질의 분석과 함께 FITC-bovine serum albumin으로 정자를 형광염색하여 정자표면에 대한 albumin의 결합양상의 변화를 조사하였다. 90분간 정자를 배양한 수 정자를 제거한 후 농축한 배양액내에 정자 또는 부정소액에서 기원한 여러종의 단백질가 함께 albumin이 다량으로 발견되었다 정자의 체외배양 과정에서 일어나는 albumin의 이탈은 배양액내의 $Ca^2$+과 무관하게 일어났다. BSA-FITC는 정소내 정자의 두부표면에 미약하게 결합한 반면 미부부정소 정자의 첨체표면에는 다량 결합하였다. $Ca^2$+-ionophore인 A23187으로 첨체반응을 유발한 정자의 두부 표면에서는 후첨체부위만이 강하게 염색되었다. 이러한 결과는 정소 및 웅성 생식수관니에서 정자표면에 부착된 albumin이 자성 생식수관을 거치는 동안 이탈됨을 시사하며 이러한 현상은 정자의 수정능력획득과 밀접한 관련이 있는 것으로 사료된다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.32-33
• /
• 2003

Mechanism of a periodic oscillation of shock-induced combustion over a two- dimensional wedges and axi-symmetric cones were investigated through a series of numerical simulations at off-attaching condition of oblique detonation waves(ODW). A same computational domain over 40 degree half-angle was considered for two-dimensional and axi-symmetric shock-induced combustion phenomena. For two-dimensional shock-induced combustion, a 2H2+02+17N2 mixture was considered at Mach number was 5.85with initial temperature 292 K and initial pressureof 12 KPa. The Rankine-Hugoniot relation has solution of attached waves at this condition. For axi-symmetric shock-induced combustion, a H2+2O2+2Ar mixture was considered at Mach number was 5.0 with initial temperature 288 K and initial pressure of 200 mmHg. The flow conditions were based on the conditions of similar experiments and numerical studies.[1, 3]Numerical simulation was carried out with a compressible fluid dynamics code with a detailed hydrogen-oxygen combustion mechanism.[4, 5] A series of calculations were carried out by changing the fluid dynamic time scale. The length wedge is varied as a simplest way of changing the fluid dynamic time scale. Result reveals that there is a chemical kinetic limit of the detached overdriven detonation wave, in addition to the theoretical limit predicted by Rankine-Hugoniot theory with equilibrium chemistry. At the off-attaching condition of ODW the shock and reaction waves still attach at a wedge as a periodically oscillating oblique shock-induced combustion, if the Rankine-Hugoniot limit of detachment isbut the chemical kinetic limit is not.Mechanism of the periodic oscillation is considered as interactions between shock and reaction waves coupled with chemical kinetic effects. There were various regimes of the periodicmotion depending on the fluid dynamic time scales. The difference between the two-dimensional and axi-symmetric simulations were distinct because the flow path is parallel and uniform behind the oblique shock waves, but is not behind the conical shock waves. The shock-induced combustion behind the conical shockwaves showed much more violent and irregular characteristics.From the investigation of characteristic chemical time, condition of the periodic instability is identified as follows; at the detaching condition of Rankine-Hugoniot theory, (1) flow residence time is smaller than the chemical characteristic time, behind the detached shock wave with heat addition, (2) flow residence time should be greater than the chemical characteristic time, behind an oblique shock wave without heat addition.