• Journal of Periodontal and Implant Science
• /
• v.28 no.2
• /
• pp.219-237
• /
• 1998

Numerous bone graft materials have been used in Periodontics, in an attempt to reach the main goal of periodontal therapy, i.e. the regeneration of periodontal tissue lost due to destructive periodontal diseases. The present study investigates the effect of composite graft of DFDB and Calcium sulfate with and without Calcium sulfate barrier in Periodontal 1-wall intrabony defects in dogs. Following the initiation of general anesthesia by I.V. administration of 40mg/Kg of Pentobabital, second premolar was extracted and full thickness flap elevated. The crown portion of premolars was removed. Exposed root canals were sealed with Caviton and covered completely with flap. After the healing period of 8 weeks, the surgical sites were re-opened and 1-wall intrabony defects were created, and treated with flap operation alone(control group), with composit graft of 80% DFDB and 20% Calcium sulfate(Experimental group 1), with composite graft of DFDB and calcium sulfate with calcium sulfate membrane( Experimental group 2). Healing response was histologically observed after 8 weeks and the results were as follows : 1. New bone formation was 70 % in the control group, 93 % in the Experimental group I, 89 % in the Experimental group II. There was a no differences between Experimental groups. 2. New cementum formation was not significantly different between control and two Experimental groups. 3. The length of connective tissue adhesion was 30 % in the control, 7% in the Experimental group I and 11 % in the Experimental group II. 4. After 8weeks, calcium sulfate was completely resorbed, while DFDB particle remained. These results suggest that the use of composite graft of allogenic DFDB and Calcium sulfate with and without Calcium sulfate barrier in periodontal 1 wall intrabony defects have little effect on connective tissue adhesion, but has beneficial effect on new alveolar bone and new cementum formation, and prevent downgrowth of epithelium and connective tissue effectively.

• Journal of Radiation Protection and Research
• /
• v.41 no.4
• /
• pp.359-367
• /
• 2016

Background: As new legislation has come into force implementing radiation safety management for the use of naturally occurring radioactive materials (NORM), it is necessary to establish a rapid and accurate measurement technique. Measurement of $^{238}U$ and $^{232}Th$ using conventional methods encounter the most significant difficulties for pretreatment (e.g., purification, speciation, and dilution/enrichment) or require time-consuming processes. Therefore, in this study, the applicability of ED-XRF as a non-destructive and rapid screening method was validated for raw materials and by-product samples. Materials and Methods: A series of experiments was conducted to test the applicability for rapid screening of XRF measurement to determine activity of $^{238}U$ and $^{232}Th$ based on certified reference materials (e.g., soil, rock, phosphorus rock, bauxite, zircon, and coal ash) and NORM samples commercially used in Korea. Statistical methods were used to compare the analytical results of ED-XRF to those of certified values of certified reference materials (CRM) and inductively coupled plasma mass spectrometry (ICP-MS). Results and Discussion: Results of the XRF measurement for $^{238}U$ and $^{232}Th$ showed under 20% relative error and standard deviation. The results of the U-test were statistically significant except for the case of U in coal fly ash samples. In addition, analytical results of $^{238}U$ and $^{232}Th$ in the raw material and by-product samples using XRF and the analytical results of those using ICP-MS ($R^2{\geq}0.95$) were consistent with each other. Thus, the analytical results rapidly derived using ED-XRF were fairly reliable. Conclusion: Based on the validation results, it can be concluded that the ED-XRF analysis may be applied to rapid screening of radioactivities ($^{238}U$ and $^{232}Th$) in NORM samples.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.1
• /
• pp.15-21
• /
• 2000

Ameloblasotma is slowly growing, locally invasive neoplasm with a potentially destructive behavior. The epithelium of ameloblastoma is thought to have an intrinsic growth potential and has been shown to present a higher rate of proliferation as compared to odontogenic cysts with low local recurrence rate. The molecular mechanisms that regulate the cell growth and invasion of ameloblastoma cells are unknown. Bcl-2 protein, which prevent apoptosis, is expressed in immortalized ameloblastoma cell line(AM-1)(Harada et al 1998). Expression of bcl-2 protein occurs in tooth germs, whose epithelial component may act as the histogenic precursor of ameloblastoma. Bax is considered as a main effector of apoptosis. Bax forms homodimers and also heterodimers with bcl-2. p53 tumor supressor gene participates not only in cell proliferation control but also in induction of apoptosis. The objective of the present study was to evaluate the apoptosis related protein expression in odontogenic cyst and ameloblastoma. A total of 10 dentigerous cysts and 16 ameloblastomas were used in the present study. Dentigerous cyst showed negative or slight positive for p53 and bcl-2 but strongly positive for bax, ameloblastoma, on the other hand, strongly positive for p53 and bcl-2 but weekly positive for bax. Bcl-2 was expressed for ameloblastoma mainly in outer layer or whole layer of epithelium and for dentigerous cyst mainly in basal layer. The difference in expression of apoptosis related protein in dentigerous cyst and ameloblastoma might explain the peculiar aggressive growth pattern of ameloblastoma.

• Korean journal of applied entomology
• /
• v.21 no.3 s.52
• /
• pp.153-158
• /
• 1982

The study was conducted to obtain the basic information on the diseases epidemics of vegetable crops grown in Namji, Jinju, Gimhae and Suncheon under the extremely varied and specified conditions, plastic film house. The disease survey was conducted from the end of April, 1951 to April 1982. Leaf mold and late blight were serious foliar disease in tomato during the seedling stage, especially when the infected seeds were sown. The diseases increased rapidly 35 days after seeding. In both continuous cultivation of cucumber and rotation with upland crops, incidence of Fusarium wilt was severe while incidence of the disease was negligible in cultivations after paddy rice or grafting on pumpkin. Downy mildew of cucumber was severe in Jinju and Suncheon area, however, it was not so serious in Namji area where the growing season of cucumber was unfavorable for the maximum disease incidence. Cucumber mosaic virus disease was prevalent in the areas surveyed and the disease incidence was increased rapidly after June. Powdery mildew prevailed at the early stage of cucumber growth after transplanting in Namji area. Root rot and wilting caused by Phytophthora capsici was as the most destructive disease in pepper grown under the vinyl house, especially in Namji and Jinju area where the pepper has been cultivated intensively. The Phytophthora attacked most parts of young plants during the winter time and then induced crown rot on the adults plants. Cultivation of pepper in vinyl house was almost impossible because of the Phytophora disease by the end of June. Virus diseases to tomato plants were prevalent throughout the surveyed area and the damage was also severe. In Jinju and Gimhae area leaf mold and late blight showed high infection rate in tomato during the harvest time.

• Journal of Bio-Environment Control
• /
• v.25 no.3
• /
• pp.146-152
• /
• 2016

Due to complicate canopy structures of Irwin mangoes grown in greenhouses, it is difficult to determine their growth parameters accurately. Leaf area, leaf fresh weight, and leaf dry weight are widely used as indicators to diagnose the tree growth. Therefore, it is necessary to establish models that can non-destructively estimate these growth indicators. The objective of this study was to establish regression models to estimate leaf area, leaf fresh weight, and leaf dry weight of Irwin mangoes (Mangifera indica L. cv. Irwin) by using leaf length, leaf width, petiole length, and SPAD value. The input values of leaf length, leaf width, petiole length, and SPAD value of 6-year old Irwin mangoes were measured, and the corresponding output values of leaf area, leaf fresh weight, and leaf dry weight were also measured. After 14 models were selected among the existing models, coefficients of the models were estimated by regression analysis. Three models with higher $R^2$ and lower RMSE values selected. In validation the $R^2$ values for the selected models were 0.967, 0.743, and 0.567 in the leaf area, leaf fresh weight, and leaf dry weight models, respectively. It is concluded that this models will be helpful to conveniently diagnose the growth of the Irwin mango.

• The Korea Journal of Herbology
• /
• v.30 no.6
• /
• pp.63-68
• /
• 2015

Objectives : Gastric lesions affect many people around the world and their development are results of the imbalance between destructive and protective factors in the gastric mucosa. Lycium chinense has been widely used as a traditional Korean medicine, it was recently reported that they have potent anti-inflammatory effects in chronic hepatitis models. Therefore, this study aimed to investigate the anti-inflammatory activity of Lycium chinense extract (LCE) on HCl-Ethanol induced gastric lesion mice.Methods : The ICR mice were divided randomly into five groups of six animals each. Group A was normal mice, and group B was treated orally with 0.5 ml 150 mM HCl-60% Ethanol. Mice in group C and D were pre-treatment of LCE (100 mg/kg and 200 mg/kg bodyweight, p.o before HCl/ethanol treatment) and group E was orally administered sucralfate (10 mg/kg).Results : 150mM HCl/60% ethanol-induced gastric mucosal injury mice were ameliorated mucosal damage upon histological evaluation by treatment of LCE. Pre-treatment of LCE attenuated reactive oxidative species (ROS) and produces peroxynitrite (ONOO^-) in stomach tissues. As results of stomach protein analyses, LCE effectively reduce inflammatory-related factors such as cyclooxygenase-2 (COX-2), tumor necrosis factor alpha (TNF-α), inducible nitric oxide synthase (iNOS) and interleukin-6 (IL-6) in gastric lesion mice. In addition, nuclear factor kappa B (NF-κB) and inhibitor of phosphorylation of nuclear factor kappa B (p-IκB) were down-regulated in LCE-administrated gastric lesion mice.Conclusions : Our discovery supports that the therapeutic activity of LCE ameliorate the development of gastric lesion via suppressing the oxidative stress and gastric partial inflammation induced by 150 mM HCl/60% ethanol.

• Journal of Oral Medicine and Pain
• /
• v.31 no.3
• /
• pp.255-263
• /
• 2006

Objectives: This article reported three patients developed anterior open bite seemed to be related to TMJ anterior disc dislocation without reduction(ADD WO R), but no evidence of condylar destructive or collapse and analyzed the craniofacial skeletal structure by means of cephalometric analysis. Results: All patients suddenly developed a centric relation/centric occlusion discrepancy, an increased overjet and an anterior open bite following ADD WO R. All patients had Angle's Class I occlusion and shallow bite, but they had skeletally Class III and Class II pattern and all were vertically significant hyperdivergent type. Conclusions: These 3 patients had characteristics of common facial morphology including:(1)Angle classification Class I and shallow bite,(2)high mandibular plane angle,(3)high gonial angle. Developed anterior open bite resulted from clockwise rotation of the mandible related TMJ ADD WO R, rather than a result from the eruption of posterior teeth. We hypothesize rotation may relate to attached direction of masticatory muscle.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.1
• /
• pp.35-42
• /
• 2008

In the nuclear power plant, early detection of fatigue crack by non-destructive test (NDT) equipment due to the thermal cyclic load is very important in terms of strict safety regulation. To this end, many efforts are exerted to the fabrication of artificial cracked specimen for practicing engineers in the NDT company. The crack of this kind, however, cannot be made by conventional machining, but should be made under thermal cyclic load that is close to the in-situ condition, which takes tremendous time due to the repetition. In this study, thermal loading condition is investigated to minimize the time for fabricating the cracked specimen using simulation technique which predicts the crack initiation and propagation behavior. Simulation and experiment are conducted under an initial assumed condition for validation purpose. A number of simulations are conducted next under a variety of heating and cooling conditions, from which the best solution to achieve minimum time for crack with wanted size is found. In the simulation, general purpose software ANSYS is used for the stress analysis, MATLAB is used to compute crack initiation life, and ZENCRACK, which is special purpose software for crack growth prediction, is used to compute crack propagation life. As a result of the study, the time for the crack to reach the size of 1mm is predicted from the 418 hours at the initial condition to the 319 hours at the optimum condition, which is about 24% reduction.

• Journal of Periodontal and Implant Science
• /
• v.35 no.2
• /
• pp.359-369
• /
• 2005

It has been suggested that morphologic characteristics of the periodontium are partly related to the shape and form of the teeth. Furthermore, the severity of symptoms of periodontal disease have been proposed to differ among these various morphologic entities or "biotypes". The purpose of the present study was to examine the relationship between the form of the crowns in the maxillary anterior tooth segment and (1) a group of morphological characteristics and (2) the thickness of the gingiva. The thickness of gingiva was measured by ultrasonic device(SDM). 100 subjects devoid of symptoms of destructive periodontal disease were examined regarding, e.g., probing depth, gingival recession, width of keratinized gingiva, thickness of the keratinized gingiva. From maxillary study cast, the width(at the apical third-CW) and the length(CL) of the crowns of the 6 anterior teeth were determined. A CW/CL-ratio was calculated for each tooth and averaged for each tooth region. The individual mean CW/CL-ratio values for the central incisors were ranked. The 10 subjects ranked highest and the 10 ranked lowest were selected as having either a long-narrow(group N) or a short-wide(group W) form of the crown of the tooth. The data for each of the examined parameters were averaged for each tooth region in each subject and mean values for subjects in groups W and N were compared using the Student t-test. Stepwise multiple regression analysis, including data from the whole sample, was performed for each tooth region with the thickness of the free gingiva as the dependent variable. The results from the analyses demonstrated that individuals with a long-narrow form of the central incisors displayed, compared to individuals with a short-wide crown, form (l) a narrow zone of keratinized gingiva, (2) a pronounced "scalloped" contour of the gingival margin. There was no significant difference between groups N and W with respect to the thickness of the keratinized gingiva. The CW/CL-ratio data revealed that a certain form of the crowns in the central incisors was accompanied by a similar form in the lateral incisors and canine tooth region. The regression analyses demonstrated that the thickness of the keratinized gingiva in central, lateral incisors and canines was significantly related to the width of the keratinized gingiva.

• Food Science and Preservation
• /
• v.24 no.1
• /
• pp.145-152
• /
• 2017

In this study, near infrared (NIR) spectroscopy known as a non-destructive analysis technique was applied to investigate peptide cleavage and consequent release of amino acids in soybean lumps as affected by its moisture content and incubation time during fermentation at 25 for 3 weeks. The NIR spectra of the soybean lump semi-dried and soaked in saline water showed that absorption intensity around 1,400 nm originating from hydrogen bonds of water decreased and absorption band shifted to 1,430 nm as moisture content decreased during incubation at 25 for 3 weeks. In addition, absorption around 2,050 nm which was assigned to amino groups increased as incubation time increased. NIR spectra data from 1,000 to 2,250 nm showed higher accuracy in the discriminant analysis between outside and inside parts of fermented soybean lumps than visible spectra result. NIR spectroscopy for the amino acid and moisture contents in traditional fermented soybean lumps showed relatively good accuracy with the multiple correlation coefficient ($R^2$) of 0.91 and 0.81, respectively, and root mean square error of cross validation (RMSECv) of 0.23 and 0.83%, respectively, in partial least square regression (PLSR). These results indicate that NIR spectral observations could be applicable to control the fermentation process for preparation of soybean products.