• 제목/요약/키워드: Desorber

검색결과 30건 처리시간 0.03초

흡착 열탈착 장치와 GC/MS를 이용한 휘발성 유기화합물의 분석과 악취원인 성분의 예측 - 음식물 퇴비화 과정에서 발생되는 악취분석의 예 - (Analysis of Volatile Organic Compounds by GC/MS with the Thermal Desorber and Characterization of the Major Components Attributing to Malodor -An Analytical Example of the Odor Emitted from the Compost of Food Waste-)

  • 유미선;양성봉;안정수
    • 분석과학
    • /
    • 제15권1호
    • /
    • pp.80-86
    • /
    • 2002
  • 흡착/열탈착/GC/MS를 이용하여 우리나라와 일본의 법정 악취성분을 한 컬럼으로 동시분석이 가능한가를 검토하였다. 트리메틸아민, 아세트알데히드, 메틸메르캅탄, 이메틸황 은 대략적인 농도를 추정할 수 있었으며, 스티렌, 이황화메틸, 이황화이메틸 그리고 프로피온알데히드 n-부틸알데히드 i-부틸알데히드 n-발레르알데히드 i-발레르알데히드, 아세트산에틸, 톨로엔, 자일렌, 메틸이소부틸케톤, 이소부탄올에 대해서는 최소감지농도까지 검출할 수 있음을 확인할 수 있었다. 악취성분의 동시 분석 예로서 음식물 쓰레기의 퇴비화 과정에서 발생되는 휘발성 성분을 농축시켜 흡착/열탈착/GC/MSD에 의해 분석하고 각 성분의 농도와 최소 냄새감지 농도로부터 악취원인 성분을 예측하였다. 분석결과 34가지 물질에 대해 확인하였고, 이 중 트리메틸아민, 이소발레르알데히드, 메틸메르캅탄, 메틸알리황, 이메틸황, 아세트알데히드, 에탄올, n-부틸알데히드의 순으로 악위에 기여할 것으로 예상되었다.

Diesel-oil에 오염된 토양의 유동상 열탈착 모델링 (Modeling of thermal fluidized desorption for diesel-oil contaminated soils)

  • 이상화;김병욱;이상득;박달근;이중기
    • 한국토양환경학회지
    • /
    • 제4권2호
    • /
    • pp.137-147
    • /
    • 1999
  • Cahn-balance에 의한 TGA(thermal gravimetric analysis)와 heat pipe가 내삽된 유동상 탈착 시스템을 이용한 실험 및 이론적 고찰을 통해 유동상 열탈착조에서 디젤오염토양의 열탈착 모델링을 확립하였다. 유류에 오염된 토양의 탈착 특성을 살펴본 결과, 비다공성(nonporous)토양("soil A")의 경우 유류 탈착 빠르게 진행되는데 반해서 다공성(porous)토양("soil B")의 경우 탈착이 지연되는 현상을 관측하였는데 이는 내부 기공에서 탈착된 유류성분이 외부로 빠져 나오는데 걸리는 시간이 비다공성 토양에 비해 상대적으로 길기 때문으로 사료된다. 또한, 확산지배 탈착 영역에서는 탈착속도는 탈착가스의 유속과는 거의 상관없는 경향을 보였다. 연속식 유동상에서의 탈착효율에 영향을 미치는 변수는 탈착조 온도, 유속, 토양 공급량 이였다. 모든 온도 범위 내에서, 유동화속도가 클수록 잔류오일의 양이 감소하는, 즉 탈착효율이 증가하는 경향을 보였다. 특히 낮은 탈착온도 일수록 유동화 유속의 증가에 따라 뚜렷한 탈착효율의 증가효과를 관측할 수 있었다. 반면에 일정한 유속 하에서 토양공급 속도의 증가에 따라 탈착 효율은 감소하였다. 공급속도가 높을 때에는 온도와는 상관없이 잔류오염물의 농도가 대체적으로 높았는데, 이는 screw feeder를 통해 유입되는 오염토양이 충분한 체류시간을 거치지 않고 빠져나감으로써 충분한 열적 교환 및 물질이동이 이루어지지 않았음을 나타내주고 있다. 본 연구에서는 Fickian 확산계수를 결합시킨 Kunii-Levenspiel 모델을 통하여 유동화 속도에 따른 오염토양의 탈착 경향을 살퍼본 결과 탈착 효율 $A_X$는 전체 물질전달계수 (${K_d}_f$)와 유체유속과 기포상 승속도의 비($u_o$$u_b$)의 변화에 크게 영향을 받는 것으로 나타났다. 모델링의 예측 결과로부터 유동층내의 확산 지배에 의한 오염토양의 탈착효율은 여러 조업변수의 조합에 의해 최적화 할 수 있음을 알 수 있었고, 아주 낮은 최소 유동화속도에서도 높은 탈착효율을 얻을 수 있다는 사실을 확인하였다. 얻을 수 있다는 사실을 확인하였다.

  • PDF

지역냉방 적용을 위한 LNG냉열 장거리 수송용 제 2종 흡수식 시스템 (Type 2 Absorption Cycle to Transport Energy in the Long Distance for District Cooling Application)

  • 조영경;김진경;오민규;강용태
    • 설비공학논문집
    • /
    • 제17권3호
    • /
    • pp.250-255
    • /
    • 2005
  • The objective of this paper is to develop a new energy transport system for district cooling application by using type 2 absorption cycle. Cold energy from the LNG storage system is utilized as the cooling source of the condenser and the rectifier. The pressures of the system, UAs of the evaporator and the desorber, and the inlet temperatures of the refrigerant to each component are considered as the key parameters. The results show that UA of the evaporator is more dominant parameter on COP than that of the desorber and the optimum system pressure for the demand side is estimated as 525 kPa. For the present system, it is recommended that the refrigerant inlet temperature of the evaporator be lower than $4.3^{\circ}C$ for long-distance transportation. It is concluded that the cold energy from the LNG storage system can be effectively applied to the long-distance transportation system for district cooling application with the type 2 absorption cycle. The optimum operation conditions are also predicted from the parametric analysis.

150 RT급 흡수식 열펌프용 고온재생기의 열전달 특성 (The heat transfer characteristics of a desorber for 150 RT absorption heat pump)

  • 박찬우;정종수
    • 설비공학논문집
    • /
    • 제11권3호
    • /
    • pp.369-376
    • /
    • 1999
  • Experiments were carried out to study the heat transfer characteristics of a disrober for 150 RT LiBr-water absorption heat pump. An experimental apparatus was divided into four sections, a combustion chamber area, two bare-tube areas, and finally a finned-tube area to quantify the heat transfer rate of each section by measuring the generation rate of vapor. Dividing plates was installed at the upper inside part of deserter to prohibit the moving of vapor generated at heating tubes of a section to another section near. In the first bare-tube area, the generation rate of vapor was the largest among the four sections. The finned-tube area only contributed to give sensible heat increase of solution to the saturation temperature. The heat transfer area of the finned-tube area was 52.2%, which absorbed only 9.2% of the total heat from the combustion gas. On the contrary, the heat transfer area of the first bare-tube area was 16.6%, but it absorbed 52.4% of the total absorbed heat. The temperature of the solution at upper part at the finned-tube area was lower than that of the lower part, because weak solution came in upper part of the finned-tube area. But, this tendency was changed at the first and second bare-tube area due to the vigorous heat transfer and fluid flow enhanced by vapor generation through heating tubes. The overall heat transfer coefficient and heat flux were the largest at the first bare-tube area among the other sections.

  • PDF

유기지방산 신규악취물질에 대한 저온농축 열탈착방식 (Thermal desorber)의 검량특성 연구 (A study on the calibration characteristics of organic fatty acids designated as new offensive odorants by cryogenic trapping-thermal desorption technique)

  • 안지원;김기현;임문순;주도원
    • 분석과학
    • /
    • 제22권6호
    • /
    • pp.488-497
    • /
    • 2009
  • 이 연구에서는 2010년 기준의 지정악취물질에 해당하는 유기지방산과 함께 기존 VOC류 지정 악취물질들을 포괄적으로 분석할 수 있는 흡착관-열탈착 분석기법을 연구하였다. 이러한 분석기법의 검량특성을 평가하기 위해, Tenax TA를 충전한 시료흡착관을 준비하였다. 그리고 여기에 유기지방산 4종 (propionic acid (PA), butyric acid (BA), isovaleric acid (IA), valeric acid (VA))을 위시한 13 가지 조사성분을 함유한 작업용 표준시료를 주입하고 저온농축기법으로 분석하였다. 유기지방산의 분석감도를 절대량 (ng) 및 농도기준 (ppb)의 검출한계로 비교해 보았을 때, 다른 일반적인 VOC 악취성분들에 비해 약 1.5-2배 낮게 나타나는 것을 확인하였다(PA: 0.24 ng (0.16 ppb), BA: 0.19 ng (0.11 ppb), IA: 0.15 ng (0.07 ppb), and VA: 0.28 ng (0.13 ppb)). 분석의 재현성을 RSE로 표시할 경우, 대부분의 성분들이 5% 이내로 안정적으로 나타난 반면, BA (8.02%), IA (14.0%), VA (5.08%)는 5%가 넘을 정도로 낮은 재현성을 보였다. 이러한 결과를 내부표준물질을 이용한 검량으로 비교하였을 때, 대다수 성분의 재현성이 향상되는 양상을 보였다(PA: $1.1{\pm}0.4%$, BA: $10{\pm}0.46$, IA; $12{\pm}0.3%$, VA: $4{\pm}0.1%$). 이 연구의 결과, 악취공정시험법에서 유기지방산의 분석방법으로 권장한 알칼리 흡수법에 대비하여 흡착튜브를 이용한 시료의 채취가 보다 유용한 대체방법으로 활용 가능한 것으로 나타났다.

Analysis of Headspace Volatile Compounds in Cold-stored and Freeze-dried Krill Eupausia superba

  • Park, Jin-Yong;Kim, Ye-Joo;Lee, Yang-Bong
    • Fisheries and Aquatic Sciences
    • /
    • 제17권2호
    • /
    • pp.189-195
    • /
    • 2014
  • Headspace volatile compounds of cold-stored and freeze-dried Krill Eupausia superba were analyzed to investigate their flavor qualities using a system combining a dynamic headspace isolator, an automatic thermal desorber, and a gas chromatograph-mass-selective detector. Levels of oxidation products of polyunsaturated fatty acids such as aldehydes, alcohols, and ketones, which are known to give seafood a nasty smell because of their low flavor threshold values, increased during cold storage of krill. Notably, levels of 2-methylpropanal, 3-methylbutanal, 2-methylbutanal and 2-butanone increased during its storage. They can be considered index compounds of off-odor according to freshness degradation during storage. By contrast, in freeze-dried krill powder, levels of aldehydes, ketones, and aromatic compounds decreased rapidly. Only alcohols, which did not greatly affect the food flavor, were isolated in large amounts. It was confirmed that levels of oxidized compounds of krill increased during cold storage, but decreased in freeze-dried krill.

GAX 암모니아 흡수식 열폄프의 발생기 일체형 정류기의 열 및 물질전달 해석 (Heat and mass transfer characteristics of generator combined rectification system of the GAX ammonia absorption heat pump)

  • 윤상국
    • 설비공학논문집
    • /
    • 제11권4호
    • /
    • pp.431-439
    • /
    • 1999
  • A generator-GAX combined rectification system of an ammonia absorption heat pump was investigated to get the optimum design values. The mass and heat transfer phenomena of the rectification system were analysed. The number of column plates, equilibrium temperature of solution on each plate and flow rates of solution and vapor generated were predicted. The characteristics of mass and heat transfer of the generator-GAX combined rectification system, i.e. concentration difference of leaving solution and vapor on each column plate, were found to be mainly governed by the pressure of generator, reflex ratio and temperature difference of analyser coolant. The number of rectification column plates for each different pressure in generator was obtained. The optimum locations for installing the feeder from solution-cooled absorber and GAX desorber in generator were predicted. The improvement of COP was followed by the increase of the rectifier efficiency and the number of column plate, and the decrease of reflex ratio.

  • PDF

산업단지에서 배출되는 악취원인물질의 규명 (Measurement of odor compounds from odorous emissions source of Industrial Complex)

  • 안상영;최성우
    • 한국환경과학회지
    • /
    • 제14권1호
    • /
    • pp.81-89
    • /
    • 2005
  • As a typical example of simultaneous analysis of the odorous compounds, the volatile organic compounds from inventory sources in Seongseo industrial area were concentrated and analyzed with thermal desorber/GC/MSD, and major malodorous compounds were estimated. Odor intensity and odor concentration was analyzed simultaneously During a period from November in 2002 to December in 2003, this study was conducted to evaluate malodor emission characterization in major treatment facilities. The major components were Dimethyl sulfide, Dimethyl disulfide, Methyl mercaptane, Ammonia, Benzene, Toluene, m,p-xylene, o-xylene, Styrene, 1,2,4­T.M.B and 1,3,5-T.M.B. Among the six major inventory sources, the odor unit concentration of Night-soil disposal facilities was the highest, $669\~2344\;ou/m^{3}.$

단단 및 2단 압축/흡수 히트펌스시스템의 성능 및 중요인자비교 분석 (Performance and Parameter Comparison between single stage and Two-Stage Compression/Absorption Heat Pump System)

  • ;박성룡
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2005년도 동계학술발표대회 논문집
    • /
    • pp.451-456
    • /
    • 2005
  • The mathematical model for the heat exchangers of absorber and desorber is made in the elementary control volume method and the thermodynamic properties of working fluid. water/ammonia mixture. are calculated by some fundamental subroutines in RefProp 7.0 and flash subroutines made by authors The simulation results show that two-stage cycle has higher COP than single stage if temperature lift is high: the performance of single stage compression cycle can be improved by increase of absorber pressure. but the performance of two-stage compression cycle can not be improved in this way : the compressor discharging temperature of two-stage compression is much lower than that of single stage cycle. which is very important to the safety operation of CA heat pump. Major parameter comparison between the cycles at their optimal configurations is also given.

  • PDF