• 한국농공학회지
• /
• 제42권1호
• /
• pp.66-72
• /
• 2000

A study was conducted to find distribution patterns of minisprinkler without a bridge for the desing of microirrigation systems. The experiments were executed in a plastic house to minimize the effect of the wind. Data were collected at four different operation pressures and at 3 different riser heights. Sprayed water were collected by aluminium cans with 65mm diameter and 100mm height placed at 0.3m grid spacing . A schematic distribution pattern with distance from a minisprinkler was suggested for the layout design of the minisprinkler. Distribution pattern of the minisprinkler was found irregular in space. Distributin performance characteristics of the minisprinkler such as effective radius. , effective area, mean application depth, absolute maximum application depth, effective maximum application depth and coefficient of variation were determined. It was indicated that there is a trend of decrease in variation coefficient adn better water distribution by the increase in operation pressures and riser heights.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2001년도 가을 학술발표논문집 Vol.28 No.2 (3)
• /
• pp.316-318
• /
• 2001

현재의 CDMA(code-division multiple access) 셀룰러망을 이용한 통신은 비교적 낮은 전송률을 가지고 있어 대용량의 데이터들을 포함하는 웹 문서 및 대량의 투선 마크업 언어(WML: Wireless Markup Language) 문서의 전송 속도면에서 미흡한 실정이다. 이에 대한 대안으로 해결을 위하여 WAP(Wireless Application Protocol) 포럼 내에서는 기본적으로 휴대용 기기나 모바일 기기에 최적화한 마이크로브라우저의 규격을 명시함은 물론 프로토콜 전판이나 모빌컴퓨터에 맞는 데이터전송을 최적화시킴으써 무선네트워크와 유선 인터넷간의 게이트웨이 기능을 하는 프록시서버 규격도 확립하였다. 본 논문에서는 이러한 점을 고려하여 Gateway 내에서 프로토콜을 변환하는 시스템을 설계 및 구현한다.

• 대한전기학회논문지
• /
• 제43권6호
• /
• pp.1001-1009
• /
• 1994

The present paper deals with a new developed sensor for measuring the time-varying magnetic fields and describes the experimental results of trasient magnetic field that takes place during the operations of electric appliance. The operation principle of the self-integrating magnetic field sensor by using coaxial cable is analyzed and a calibration investigation is carried out. The frequency bandwidth of the magnetic field measurement system is from 40 Hz to about 300 kHz. The magnetic field induced by the starting and/or operation of electric appliance mainly includes the odd harmonics such as the third, the fifth and the seventh harmonics. The magnetic field intensity caused during the operation of ultrasonic washer is inversely proportional to distance, this correspodns to induction component. As a result, it was known that the odd harmonics of magnetic field in the desing of electromagnetic shield employed for protecting electronic circuit and control devices have to be considered.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.672-674
• /
• 2001

Axial magnetic field(AMF) type electrode can increase the interrupting capability of vacuum interrupters. But, this interrupting capability vary with design parameters such as shape of electrode, slits of contact, material of contact and so on. In this paper, shown arc characteristics of unipolar axial magnetic field type electrode for vacuum interrupter by design parameters such as shape of contact slits and diameter of contact. And, confirmed vacuum arc configuration by individual design parameter using high speed camera.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2756-2758
• /
• 2005

본 논문에서는 제어시스템의 신뢰성 향상을 위한 고장허용제어계를 실현하기 위하여, 함수관측자를 도입한 장치고장검출(IFD)기법 및 고장보상알고리즘을 제안하고, 이를 전형적인 불안정 비선형시스템인 역진자제어계에 적용하였다. 제안된 IFDS는 기존의 다중관측자기법과 동일한 구조를 가지지만 최저차 설계가 가능한 미지입력 함수관측자를 채택함으로서 알고리즘의 단순화를 가하였을 뿐 아니라 고장량의 추정 등 다양한 설계목적을 고려하여 설계될 수 있다는 특징을 가진다. 제안된 고장 검출식별 기법의 제안된 역진자제어계를 위한 제어기, 고장검출식별 및 보상알고리즘을 모두 포함한 상태에서 고장허용제어의 가능성을 검증하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.901-904
• /
• 1998

In this paper, we describes PID-neural network controller for the rotary inverted pendulum. PID control is applied to many fields but has some problems in nonlinear system due to a variation of parameter. So, we should desing the controller which is adjusted PI parameters by the neural network which is learned by backpropagation algorithm. And we show that on-line control is possible through the PID-neural network controller. The angle of the pendulum is controlled and then the position of the rotating arm is also controlled to maintain with in the set point. Measurement of the pendulum angle is obtained using a potentionmeter. The objective of the experiment is to design a PID-neural network control system that positions the arm as well as maintains the ivnerted pendulum vertical. Finally, we describe the actual experiment system and confirm the experimental results.

• 전자공학회논문지A
• /
• 제31A권10호
• /
• pp.173-184
• /
• 1994

BiCMOS circuits mixed with CMOS and bipolar technologies show peculiar fault characteristics that are different from those of other technoloties. It has been reported that because most of short faults in BiCMOS circuits cause logically intermediate level at outputs, current monitoring method is required to detect these faluts. However current monitoring requires additional hardware capabilities in the testing equipment and evaluation of test responses can be more difficult. In this paper, we analyze the characteristics of faults in BiCMOS circuit together with their test methods and propose a new design technique for testability to detect the faults by logic monitoring. An effective method to detect the transition delay faults induced by performance degradation by the open or short fault of bipolar transistors in BiCMOS circuits is presented. The proposed design-for-testability methods for BiCMOS circuits are confirmed by the SPICE simulation.

• 전자공학회논문지B
• /
• 제33B권2호
• /
• pp.28-36
• /
• 1996

By utilizing the interinsic structure of the underlying continous-time nonlinear system, one can design an approximate sampled-data observer improved with respect ot the sampling-time for the systems. In this paper, we characterize the conditions for the solvability of the improved approximate sampled-data nonlinear observer design problem. In particular, it is shown that when the dimension of the state space is two, the nonlinear systems for which it is possible ot desing 3rd or higher order approximate sampled-data nonlinear observer are locally state-equivalent to an observable bilinear system. The practical implication is that seeking higher order approximate sampled-data nonlinear observer for nonlinear systems is very restricted.

• 한국지진공학회논문집
• /
• 제2권3호
• /
• pp.61-71
• /
• 1998

A performance-based seismic design method for reinforced concrete building structures being developed in Japan is outlined. Technical and scientific background of the performance-based design philosophy as well as recently developed seismic design guidelines are is presented, in which maximum displacement response to design earthquake motion is used as the limit-state design criteria. A method of estimating dynamic response displacement of the structures based on static nonlinear analysis is described. A theoretical estimation of nonlinear dynamic response considering the characteristics of energy input to the system is described in detail, which may be used as the standard method in the new performance-based code. A desing philosophy not only satisfying the criteria but also evaluating seismic capacity of the structures is also introduced.

• 한국지진공학회논문집
• /
• 제2권3호
• /
• pp.111-119
• /
• 1998

This paper reports a part of research work on earthquake resistance consideration in regions of moderate seismicity, which is being carried out in the Department of Civil Engineering, Hong Kong University of Science & Technology. The possible seismic hazard in Hong Kong, which is located in a region of moderate seismicity, is described. A case study is presented to compare the wind and earthquake effects on Hong Kong buildings and to assess whether seismic analysis and desing is necessary for building structure. Potential problems of reinforced concrete buildings under earthquake effects in regions of moderate seismicity are discussed.