• Ecology and Resilient Infrastructure
• /
• v.6 no.4
• /
• pp.191-199
• /
• 2019

Road development is considered an important factor in invasion and dispersion of ailen plants by damaging the natural ecosystems and connecting the detached landscapes into long tubular structures. In this study, vegetation survey was carried out according to the topographical characteristics of cut slope, fill slope, and flat land at the construction site in order to understand the effect of road developemt on the change of the floristic composition of ailen plants. Road developement projects caused a lot of changes in annual and biennial alien plants because of continuous disturbances. Changes in species composition of alien plants decreased in the cut slope. On the other hand, the ailen palnts of the fill slope increased. The increase or decrease alien plants on flat land were identified depending on where it occurred, and no major trend was found. The cause of these change was driven by unintentionally introduced alien plants. In particular, the cut slope with a high occurence of unintentional ailen plants should not be used as a source of high-risk alien plants such as ecosystem disturbances. Since the transplanted species were intentionally planted by the landscape plan, it was possible to identify colonies from early stages and spread to the nearby flat land. Therefore, in order to minimize the impact of road slope vegetation on the surrounding ecosystem during and after road construction, it is suggested to plant high viability plants in the landscape design during the environmental impact assessment consultation.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.4
• /
• pp.1-9
• /
• 2012

As we are turnning into the aged society, accidents by falling down are increasing in the aged people's group. In this paper, we design the system with the 3-Axis acceleration sensor which is composed by a single chip. The body activity signal is measured with the signal detector and RF communicator in this proposed system and the and falling by the entering signal pattern analysis with 3-Axis acceleration sensor. For the RF communication, we are using nRF24L01p and 8bits ATmega uC for the processor. The error of energy expenditure estimation between motor driven treadmill and proposed a body activity module was 7.8% respectively. Human activities and falling is monitored according to analyze and judge the critical value of the Signal Vector. as falled down if they don't turn off the alarm after specific period and the aged person's after falling down activities are their position and more.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.7
• /
• pp.900-905
• /
• 2016

The field of power system harmonics has been receiving a great deal of attention recently. This is primarily due to the fact that non-linear (or harmonic-producing) loads comprise an ever-increasing portion of what is handled at a typical industrial plant. The incidence rate of harmonic-related problems is low, but awareness of harmonic issues can still help increase offshore power plant system reliability. On the rare occasion that harmonics become a problem, this is either due to the magnitude of harmonics produced or power system resonance. This harmonic study used an electrical configuration for the offloading scenario of a Floating LNG (FLNG) unit, considering power load. This electrical network configuration is visible in the electrical network load flow study part of the project. This study has been carried out to evaluate the performance of an electric power system, focusing on the harmonic efficiency of an electrically driven motor system to ensure offshore plant safety. In addition, the design part of this study analyzed the electric power system of an FLNG unit to improve the safety of operation and maintenance.

• Nuclear Engineering and Technology
• /
• v.40 no.6
• /
• pp.451-458
• /
• 2008

After more than 10 years construction, KSTAR (Korea Superconducting Tokamak Advanced Research) had finally completed its assembly in June 2007, and then achieved the goal of first-plasma in July 2008 through the four month's commissioning. KSTAR was constructed with fully superconducting magnets with material of $Nb_3Sn$ and NbTi, and their operation temperatures are maintained below 4.5K by the help of Helium Refrigerator System. During the first-plasma operation, plasmas of maximum current of 133kA and maximum pulse width of 865ms were obtained. The KSTAR Integrated Control System (KICS) has successfully fulfilled its missions of surveillance, device operation, machine protection interlock, and data acquisition and management. These and more were all KSTAR commissioning requirements. For reliable and safe operation of KSTAR, 17 local control systems were developed. Those systems must be integrated into the logically single control system, and operate regardless of their platforms and location installed. In order to meet these requirements, KICS was developed as a network-based distributed system and adopted a new framework, named as EPICS (Experimental Physics and Industrial Control System). Also, KICS has some features in KSTAR operation. It performs not only 24 hour continuous plant operation, but the shot-based real-time feedback control by exchanging the initiatives of operation between a central controller and a plasma control system in accordance with the operation sequence. For the diagnosis and analysis of plasma, 11 types of diagnostic system were implemented in KSTAR, and the acquired data from them were archived using MDSpius (Model Driven System), which is widely used in data management of fusion control systems. This paper will cover the design and implementation of the KSTAR integrated control system and the data management and visualization systems. Commissioning results will be introduced in brief.

• Clean Technology
• /
• v.26 no.2
• /
• pp.96-101
• /
• 2020

In this paper, the commercial feasibility of trigeneration, producing heat, power, and hydrogen (CHHP) and using biogas derived from macroalgae (i.e., seaweed biomass feedstock), are investigated. For this purpose, a commercial scale trigeneration process, consisting of three MW solid oxide fuel cells (SOFCs), gas turbine, and organic Rankine cycle, is designed conceptually and simulated using Aspen plus, a commercial process simulator. To produce hydrogen, a solid oxide fuel cell system is re-designed by the removal of after-burner and the addition of a water-gas shift reactor. The cost of each unit operation equipment in the process is estimated through the calculated heat and mass balances from simulation, with the techno-economic analysis following through. The designed CHHP process produces 2.3 MW of net power and 50 kg hr^-1 of hydrogen with an efficiency of 37% using 2 ton hr^-1 of biogas from 3.47 ton hr^-1 (dry basis) of brown algae as feedstock. Based on these results, a realistic scenario is evaluated economically and the breakeven electricity selling price (BESP) is calculated. The calculated BESP is ¢10.45 kWh^-1, which is comparable to or better than the conventional power generation. This means that the CHHP process based on SOFC can be a viable alternative when the technical targets on SOFC are reached.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.111-122
• /
• 2005

The data on the pile load tests performed on 35 large drilled shafts are analyzed to investigate the load-settlement characteristics of large drilled shafts embedded in bed rocks. Generally, the settlement of large drilled shafts embedded in bed rocks is too small to determine the ultimated load with application of the regulation in design code for either the total settlement or the residual settlement. Therefore, to determine the yield load of large drilled shafts embedded in bed rocks, p(load)-logS (settlement) curve method, which has been proposed originally for the driven pile, was applied to the investigation on the data of the pile load tests. This technique shows that the yield load can be determined accurately and easily rather than other conventional techniques such as P-S, logp-logS, S-logt, and P-S curve methods. An empirical equation is proposed to represent the relationship between pile load and settlement before the yield loading condition. And the settlement of piles was related with the depth embedded in rock as well as rock properties. Based on the investigation on the data of pile load tests, the resonable regulations f3r both the total settlement and the residual settlement are proposed to determine the yield load of large drilled shafts embedded in bed rocks.

• Journal of Digital Convergence
• /
• v.16 no.7
• /
• pp.107-116
• /
• 2018

One of the key mission is to develop and prompte the use National Competency Standards, which is defined to be the systemization of competencies(knowledge, skills and attitudes) required to perform duties at the workplace by the nation for each industrial sector and level. This provides the basis for the design of training and detailed specifications for workplace assessment. To promote the data-driven service improvement, the commercial product Splunk was introduced, and has grown to become an extremely useful platform because it enables the users to search, collect, and organize data in a far more comprehensive, far less labor-intensive way than traditional databases. Leveraging Splunk's built-in data visualization and analytical features, HRD Korea have built custom tools to gain new insight and operational intelligence that organizations have never had before. This paper analyzes the NCS homepage. Concretely, applying Splunk in creating visualizations, dashboards and performing various functional and statistical analysis and structure without Web development skills. We presented practical use and implications through case studies.

• Journal of the Korea Society for Simulation
• /
• v.15 no.2
• /
• pp.59-69
• /
• 2006

Component-based software development is introduced as a new development paradigm in software development method. This approach is different from existing software development approach because it is based on reusable and autonomous unit, component. Therefore, component-based development(CBD)is divided into two stages; component development process and component assembly process; application development process. Component development process is the core of CBD because component has a key for good software. Currently many methodologies or tools have been introduced by various academies or industries. However, those don't suggest systematic and flexible modeling techniques adaptable easily into component development project. Existing approaches have a unique orarbitrary modeling technique or provide heuristic guidelines for component modeling. As a result, many component developers are faced with a difficult problems; how to developcomponent models, when develop which diagrams, and so on. In order to address this problem, we suggest a meta-model driven approach for component development in this paper. We provide meta-models according to both layer and development phase. We expect that suggested meta-models allow component developers to develop appropriate models of the time.

• Geotechnical Engineering
• /
• v.5 no.1
• /
• pp.7-18
• /
• 1989

In pile load tests on end bearing piles, generally, it is not possible to continue loading to the ultimate load. Thus, the concept of yield load has been introduced for determining design loads Iron the pile load test records. The conventional rules to determine the yield load were not available for evaluation on pile load test records obtained in 6 fields nearby westers 8r Southern Coasts in Korea. A new rule 9.as presented to determine easily the yield load, based on investigations on the pile load test records. The yield load of piles is determined at the infiection point on semi-logarithmic coordinates (P-logS), in which load is plotted in normal scale and settlement is plotted in logarithmic scale. This method may not only save much costs and times but also present safe luorking circumstances for pile load tests in field. It was found that the yield load represented the elastic limit of the pile load-settlement behalf.iota. The ultimate load, which is given at 25.4mm settlement on pile head, was 1.5 times of the yield load. The allowable long-term and short-term load capacities were, respectively, 50% and 75% of the yield load. The safety factors to get the allowable pile capacity were obtained as 2.0~4.0 for the equations to predict the static pile capacity.

• Journal of the Economic Geographical Society of Korea
• /
• v.7 no.1
• /
• pp.65-81
• /
• 2004

Foreign direct investment (FDI) by firms has various motives in terms of the strategy for firms' long-term growth. This research uses the case study of Hyundai Motor Manufacturing Alabama to analyze the motives of the Korean auto industry's FDI in the U.S. and the locational factors that determined the selection of the site. This paper starts from the question of why Hyundai made the decision to invest in the U.S., which is not favorable in terms of production cost, especially considering that its exports to the U.S. have been on the increase. The results indicate that the strongest motive for the decision to invest in the U.S. was to ameliorate the trade friction between Korea and the U.S. Given that Hyundai depends on the U.S. market to a large extent for its exports, the foremost motive was to use local production in order to reduce the serious trade imbalance in the automobile sector between Korea and the U.S. in order that trade friction with the U.S. may be avoided and causes for trade disputes may be reduced. Other motives such as improving the access to local consumers were of secondary importance. After the selection of the country in which to invest, however, various factors were considered in the decision regarding the location of the plant, and incentives by local governments ultimately played a key role in this decision. The results imply that the Korean manufacturing industry's investment in the U.S. cannot be explained by traditional FDI theories and instead was greatly driven by a strategic defensive motive. In addition, the results confirm that the design of an appropriate incentive structure by host governments is important for attracting FDI.