• 복식
• /
• 제64권8호
• /
• pp.67-82
• /
• 2014

This research aims to explicate how we reveal our identity and emphasize beauty in our passion for beauty. It also attempts to find out our sense of beauty in exaggeration of visual expressions. The purpose is to represent how the contemporary knit fashion is various and exaggerated in our modern fashion world, and also to give the direction of new knitwear designs through the visual analysis of exaggerated knit fashion. Literature research was done by studying reference books and magazines, leading papers and based on a dissertation thesis. This study collected 787 designer's works published in the world's big Four collections from the 2000 S/S to 2011 S/S, in 23 seasons during 12 years. In answer to 9 experts about the criteria of classification, 520 works were chosen and analyzed according to the standard of exaggerated knitwear. The result of the study is the followings: The type of exaggeration shown in contemporary knit fashion was classified in three categories; Enlarge exaggeration, reduce exaggeration and transform exaggeration. As a sub-category, enlarge exaggeration was classified into three categories; Volume expansion and the expansion by the material, gauge and larger composition application expansion. Reduce exaggeration appeared as mini-reduction, skinny-reduction and transform exaggeration was respectively classified into deformation of the shape and patterns. The characteristics of exaggeration shown in contemporary knit fashion appeared as the new formative sense. In terms of fuller sense and surface, using various materials, gauge, changes in the composition represented challenges for textiles. The exaggerated contemporary knitwear expressed sex appeal using tight-fitting effect. Contemporary knit fashion simplified the design by taking advantage of the strong elastic attributes. It showed the beauty of women, expressed variability and limitless knit characteristics beyond the conventional thinking. In addition, it has been well represented as a form of freedom, amusement and diversity.

• 한국공간구조학회논문집
• /
• 제7권5호
• /
• pp.67-74
• /
• 2007

본 연구에서는 판 구조물의 최적위상을 찾기 위한 비대칭 층을 가지는 인공재료모델을 이용한 위상최적화기법을 제시하였다. 구절점 판요소를 형성하기 위하여 판의 일차전단변형을 고려하는 Reissner-Mindlin 판이론이 도입되었다. 최소화하고자 하는 변형에너지를 목적함수로 하고 구조물의 초기부피를 제약함수로 채택하였다 인공재료모델에 존재하는 다공성물질의 구멍의 크기를 조절하기 위하여 최적정기준법을 바탕으로 하는 크기조절알고리듬을 도입하였다. 제시된 위상최적화 기법의 성능을 조사하기 위하여 수치예제를 수행하였다. 수치해석결과로부터 제시된 위상최적화기법은 판구조물의 최적위상을 도출하는데 매우 효과적인 것으로 나타났다. 특히 제시된 비대칭 층모델은 판구조물의 보강재를 보다 실제적으로 도출하는데 유용할 것으로 나타났다.

• 한국의류학회지
• /
• 제15권4호
• /
• pp.341-349
• /
• 1991

This study was done to provide basic data for clothing design and thus to contribute to the academic development of the clothing and textile area. The focus of this study was to charac­terize the somatotype based on each individual's lateral view. For this purpose, firstly, categorization of the subjects based on their lateral view and definition of each category, secondly, characterization of each somatotype, and thirdly, sugges­tion of the deterministic criteria of each category were complished. The subjects in this study were female college students of 18 to 26 year-old whose somatotypes were comparatively invariable after cessation of physical growth. The metrical items characterizing upper body lateral view were chosen. Data were collected through Anthropometry and Photometry and analyzed by Factor analysis. The results were as follows; 1. Each subject's side view contour was classified as straight type, lean-back type, bend­forward type, and swayback according to its position to the relative plumb line. Straight type was defined as the type in which the plumb line passes through the lobe of the ear, the shoulder joint, and the mid abdominal region laterally. Lean-back type positioned the plumb line more posteriorly than straight type. Bend-forward type positioned the plumb line more anteriorly than straight type. Swayback positioned the plumb line at about the same line as straight type. And curvature of side view contur was more prominent in this type than in straight type. 2. Seven factors were figured out. The first factor was representing upperbody volume, and the second factor was representing size, the third factor was horizontal distance from lateral view representing size view contour. The fourth factor was front body length, the fifth factor was back body length. The sixth factor was shoulder length and shoulder width representing shoulder shape. The seventh factor was the bust shape.

• Ocean Systems Engineering
• /
• 제9권3호
• /
• pp.287-328
• /
• 2019

Comprehensive understanding of the flood risk assessments via frequency analysis often demands multivariate designs under the different notations of return periods. Flood is a tri-variate random consequence, which often pointing the unreliability of univariate return period and demands for the joint dependency construction by accounting its multiple intercorrelated flood vectors i.e., flood peak, volume & durations. Selecting the most parsimonious probability functions for demonstrating univariate flood marginals distributions is often a mandatory pre-processing desire before the establishment of joint dependency. Especially under copulas methodology, which often allows the practitioner to model univariate marginals separately from their joint constructions. Parametric density approximations often hypothesized that the random samples must follow some specific or predefine probability density functions, which usually defines different estimates especially in the tail of distributions. Concentrations of the upper tail often seem interesting during flood modelling also, no evidence exhibited in favours of any fixed distributions, which often characterized through the trial and error procedure based on goodness-of-fit measures. On another side, model performance evaluations and selections of best-fitted distributions often demand precise investigations via comparing the relative sample reproducing capabilities otherwise, inconsistencies might reveal uncertainty. Also, the strength & weakness of different fitness statistics usually vary and having different extent during demonstrating gaps and dispensary among fitted distributions. In this literature, selections efforts of marginal distributions of flood variables are incorporated by employing an interactive set of parametric functions for event-based (or Block annual maxima) samples over the 50-years continuously-distributed streamflow characteristics for the Kelantan River basin at Gulliemard Bridge, Malaysia. Model fitness criteria are examined based on the degree of agreements between cumulative empirical and theoretical probabilities. Both the analytical as well as graphically visual inspections are undertaken to strengthen much decisive evidence in favour of best-fitted probability density.

• 상하수도학회지
• /
• 제33권1호
• /
• pp.79-86
• /
• 2019

In order to measure the filtration characteristics of a cotton ball shape filter, the experiments of suspended solids(SS) surrogate material selection and filtration performance have been carried out in this study. Between the two materials of powdered activated carbon(PAC) and powdered red-clay, PAC is more suitable surrogate material in terms of experimental criteria and particle size distribution in the non-point source pollutants removal system. As a result of the filtration experiments with the cotton ball shape filter, the initial headloss was about 8 cm, and the headloss slightly increased over filtration time. The Kozeny-Carman equation was used to analyze the changes of pressure and porosity during the filtration. The initial porosity was calculated as 0.945 and it decreased to 0.936 at the end of design filtration time. As the filtration continued, the SS concentration of the filtered water gradually increased and the SS removal rate gradually decreased. When the SS target removal efficiency is assumed to be 80%, the cumulative SS removal capacity is expected as $28.8kg/m^2$. This means the volume loading rate of the cotton ball shape filter can be $115m^3/m^2$ when the typical SS concentration of non-point source water pollution is assumed as 250 mg/L.

• Tribology and Lubricants
• /
• 제38권4호
• /
• pp.136-142
• /
• 2022

This paper investigates the enhanced wear performance of a CrAl coated accident tolerant fuel (ATF) cladding. In the wake of the Fukushima accident, extensive research on ATF with respect to improving the oxidation resistance of cladding materials is ongoing. Since coated Zr claddings can be applied without major changes to the criteria for reactor core design, many researchers are studying coatings for claddings. To improve the quality of the CrAl coating layer, optimization of the manufacturing process is imperative. This study employs arc ion plating to obtain improved CrAl coated claddings using CrAl binary alloy targets through an improved coating method. Surface roughness and adhesion are improved, and droplets are reduced. Furthermore, the coated layer has a dense and fine microstructure. In scratch tests, all the tested CrAl coated claddings exhibit a superior resistance compared to the Zr cladding. In a fretting wear test, the wear volume of the CrAl coated claddings is smaller compared to the Zr cladding. Furthermore, the coated cladding manufactured through the improved process exhibits better wear resistance than other CrAl coated claddings. Based on these results, we suggest that fine microstructure is attributed to a mechanically and microstructurally robust CrAl coating layer, which enhances wear resistance.

• 한국산학기술학회논문지
• /
• 제17권11호
• /
• pp.314-321
• /
• 2016

서울시도의 경우 자치구 관할 도로에 비해 관리상의 중요도에 차이가 있고, 교통량 및 포장두께가 다르며 도로파손으로 인한 포장상태 저하율이 상이하기 때문에 기존 서울시도의 엄격한 관리기준을 자치구도에 적용하는 것은 바람직하지 않다. 본 연구에서는 서초구의 한정된 도로포장 유지보수 예산으로 보다 합리적이고 효율적인 포장상태 평가 및 관리를 위해 서울시도 PMS(Pavement Management System) 체계인 SPI(Seoul Pavement Index) 평가방법에 기반 하여 자치구도 포장평가방안을 제시하였다. 기존 시도SPI의 주요 변수인 균열율(Crack), 소성변형(Rutting), 평탄성(IRI)에 대한 관리기준을 구청 도로관리 기준에 맞도록 완화시키고, 제안한 각각의 포장파손 공용성 모형에 적용하여 포장상태계수를 산정하였으며, 또한, 설계시 공용성과 실제 공용성과의 차이점과 함께 준공 시 도로포장 상태도 반영되도록 수정하였다. 최종적으로 서초구 포장종합평가 모형식은 서울시의 모형식과 동일하게 각각의 공용성능 항목인 균열, 소성변형, 평탄성을 동등한 비율로 설정하여 도로포장의 전체 공용성에 영향을 주도록 설정된 제안 SPI를 개발하였다. 따라서 시도SPI보다 완화된 기준 및 설계와 시공현장상태를 반영한 구도SPI를 활용한다면 보다 합리적인 서초구도 포장의 합리적인 유지보수를 시행할 수 있을 것이다.

• 대한환경공학회지
• /
• 제31권3호
• /
• pp.193-202
• /
• 2009

본 연구는 국내 중소 도시지역에서 강우 시 발생하는 강우유출수의 유출경향을 분석하고 초기강우기준을 산정하기 위하여 수행되었다. 연구지역은 국가산업단지가 소속되어 있는 구미시 원평동의 주거지역으로 선정 되었으며 모니터링 기간은 3개월에 걸쳐 시행되었다. 연구지역의 유역면적은 24.9 ha이고, 토지이용형태는 주거지역으로 대상유역의 80%가 불투수 면적(포장의 형태: 아스팔트)인 것으로 나타났다. 모니터링은 총 6회의 강우사상에 대하여 실시하였으며 모든 수질항목에 대해 EMC (Event Mean Concentration)와 SMC (Site Mean Concentration)를 산정하였다. 또한 강우지속시간에 따른 입경크기분포의 변화와 초기세척 현상을 관찰하였는데, 입경크기분포는 10%입경($D_{0.1}$), 50%입경($D_{0.5}$, 90%입경($D_{0.9}$이 각각 9.82 ${\mu}m$, 38.99 ${\mu}m$, 159.61 ${\mu}m$로 나타났고, 초기세척 현상은 용존성 물질보다 입자성 물질이 더 강하게 나타났다. $MFF_n$ (Mass first flush)을 이용하여 초기강우기준을 검토한 결과 초기우수유출수의 부피 30%에 오염물질부하량의 부피 44.4~58.5%를 포함하고 있는 것으로 나타났다. $MFF_n$과 입경크기분포는 자연형, 장치형 시설과 같은 다양한 비점오염저감시설의 설계 및 운전과 초기강우기준 결정을 위한 정보를 제공할 수 있을 것으로 기대된다.

• 한국지반환경공학회 논문집
• /
• 제15권1호
• /
• pp.53-62
• /
• 2014

기존 국내 병설터널의 이격거리는 지반조건에 따라 터널직경(D)의 2~5D 정도를 확보하는 것이 일반화되어 왔으나, 최근 들어 대규모 절취에 따른 환경훼손 및 용지매입의 제약, 선형의 연속성 유지 등의 문제를 수반하게 되면서 터널 중심간격이 1D 이하인 근접 병설터널의 현장 적용성이 확대되고 있다. 특히, 터널 필라폭이 감소할 경우 필라(Pillar)의 안전성이 터널의 거동에 영향을 미치게 되므로, 이에 대한 다양한 연구의 필요성이 대두되고 있다. 그러나 현재까지의 연구는 주로 필라의 거동특성이나 설계 영향 인자들에 대한 분석에 국한되었으며, 실무에 적용 가능하고 정량적인 데이터는 제시하지 못하고 있는 실정이다. 이에 본 연구에서는 현장 시공조건을 최대한 반영할 수 있는 안정성 평가기법 및 설계 지표를 제시하기 위해 현장조건으로 터널 간 근접도가 가장 높은 갱구부 구간의 지형 및 지층특성을 반영하고, 암반 및 완전풍화 상태의 다층지반조건 상태를 모사하였으며, 지반 강도별 필라폭 변화에 따른 수치 해석적 분석을 통해 필라의 안전성이 터널 전체 안정성에 미치는 영향 정도를 평가하였다. 또한, 지표침하비 및 간섭체적비, 평균강도/응력비 등에 대한 종합적 분석 결과와 Hoek & Brown(1980) 파괴기준을 토대로 실무에 적용이 가능한 근접 병설터널 필라의 안전율 평가식과 지반 강도별 최소 필라폭을 제시하였다.

• 유통과학연구
• /
• 제13권10호
• /
• pp.93-99
• /
• 2015

Purpose - It has been argued that the regulations restricting entry and opening hours of General Super Markets and Super Super Markets have not been as effective as expected. In contrast, the win-win item scheme that appeared recently has the advantage that it could raise the effectiveness of the system in that win-win items are in principle resigned on the basis of bilateral agreements. This study analyzes the win-win item agreement made between Homeplus at Hap-jung and small traditional markets to examine the practical effectiveness of the win-win item scheme. While existing literature studying the regulatory effects have concentrated on the restrictions around store entry or opening hours of large retailers, it can be said that there have been few empirical studies on the effect of win-win items agreement with large retailers. Research design, data, and methodology - Homeplus at Hap-jung made a win-win items agreement with nearby small traditional market traders in 2013. In accordance with this voluntary agreement, Homeplus started by limiting its sales to 15 win-win items. The survey was conducted through one-on-one interviews, April 14 to May 2, 2014, by a professional public opinion research agency. The interviews were targeted at small business retailers in the nearby traditional market. We divided the traditional markets near Homeplus at Hap-jung where the win-win item agreement was achieved into two groups, win-win item agreement markets and non win-win item agreement markets, to compare the performance difference between the two groups. Results - To determine the change in sales of the 15 win-win items, we examined the performance difference between the two groups using two criteria (compared with similar items, and compared to sales volume a year ago). The results show that the individual sales of win-win items in the win-win item agreement markets are more likely to increase than in the non win-win item agreement markets. Total sales volume of individual stores in the agreement markets also showed a more significant increase compared to a year ago than those in non win-win item agreement markets. Conclusions - Contrary to the existing retail regulations that have one-sided and uniform characteristics, it can be pointed out that the win-win item scheme has the effect of increasing the success of the system itself because it is done on the basis of mutual agreement between General Super Markets and traditional markets. The empirical results of this study can be said to support this conjecture. For the successful settlement of a win-win items agreement, the following points should be reviewed. First, it requires a great effort from the selection process of win-win items in order to improve the effectiveness of the agreement. Second, the existing General Super Markets customers should be introduced to the traditional markets or small shops to increase the sales of win-win items. Therefore, voluntary effort is essentially required from the traditional markets to engage customers.