• 한국정밀공학회지
• /
• 제20권5호
• /
• pp.225-231
• /
• 2003

The injection molding is a traditional manufacturing method that can make plastic parts by just one time in mold. Therefore, the injection molding has become one of a manufacturing method, which is widely applied in a producing of plastic products. Nowadays, to use of plastic parts has increased and plastic product-model using term has been shorten. By these reasons, using term of a injection mold has fast been reduced. These produced molds will be disused and leaved in a storage after a regular term to use it. These leaved molds are sometime sold as scrap iron. But, these molds have lots parts for recycling except special parts for example, cavities, cores and eject pins, etc. In this research, we investigated when the cavity and core of in injection mold would be changed, the injection mold could be recycled. We suggested the structures and standardizations for recycling of a moldbase. We also developed a program in which can be used when the recycling moldbase design in the Auto-CAD with the recycling standards. We called this program as the Recy-Mold. For the availability of the program and moldbase structure fur the recycling standards, we experimented a used mold for automobile lens, which was remanufactured by the recycling standard. The results of this test showed feasibility for the recycling mold.

• Smart Structures and Systems
• /
• 제6권4호
• /
• pp.405-421
• /
• 2010

This paper proposes a method for early warning of hazard for pipelines. Many pipelines transport dangerous contents so that any damage incurred might lead to catastrophic consequences. However, most of these damages are usually a result of surrounding third-party activities, mainly the constructions. In order to prevent accidents and disasters, detection of potential hazards from third-party activities is indispensable. This paper focuses on recognizing the running of construction machines because they indicate the activity of the constructions. Acoustic information is applied for the recognition and a novel pipeline monitoring approach is proposed. Principal Component Analysis (PCA) is applied. The obtained Eigenvalues are regarded as the special signature and thus used for building feature vectors. One-class Support Vector Machine (SVM) is used for the classifier. The denoising ability of PCA can make it robust to noise interference, while the powerful classifying ability of SVM can provide good recognition results. Some related issues such as standardization are also studied and discussed. On-site experiments are conducted and results prove the effectiveness of the proposed early warning method. Thus the possible hazards can be prevented and the integrity of pipelines can be ensured.

• 한국실내디자인학회논문집
• /
• 제36호
• /
• pp.143-150
• /
• 2003

CAD System that was introduced In 1980 has significantly changed its way with the informatization in late 1990s. Nevertheless, tremendous data including interior Design has been produced, but it has been mixed without any organized direction. This study reviews the influence of Computer in interior Design Industry related to other Industries and searches for the common directionality that exists inside that diversity On the basis of this review, this study aims to make knowledge that is the new value from the Computer media as the guideline for research and development. For analysis, this study considers the development situation of other industries and the Computer systematization process in Korea and abroad at the same time on the basis of the change of interior Design process by CAD System.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.269-272
• /
• 2004

The present study used a diagrammatic analysis of 6 sigma quality control and Taguchi method for injection molding process of monitor back-cover, evaluated the influence on the cycle time with part design, mold design, molding process and standardization activity involving design & molding, adopted analysis of sensitivity and effective factors of the part design and molding process conditions for productivity, identified main design molding factors, as critical ones influencing on the quality and productivity, of which is summarized as design guidance. The main contribution factors for cycle time can be sequentially enumerated as follows; hot spot, part thickness, coolant inlet temperature, melt temperature cooling line layout, etc.. As a first step critical factors of the design process of current monitor housing were investigated. And the optimal and better critical factors found in the first step were applied to a new product proving our process was correct. Moldflow software was used for injection molding simulation, and Minitab software for the statistical analysis. Finally, the productivity was increased by about 33 percents for our specific case.

• 한국조명전기설비학회지:조명전기설비
• /
• 제11권1호
• /
• pp.34-36
• /
• 1997

기계기구의 설계나 개발시 개발제품의 표준화 및 양호한 호환성, 공작상 공기의 단축, 가격저하등의 장점을 갖는 계열화 설계기법으로 CAE에의한 방법을 소개했다. 특히 대형기기에서부터 초정밀 기기 등에 대한 설계나 개발시 표본모델을 선정하고 그로부터 물리적이고 기술적인 부분의 면밀한 분석을 통해서 고유한 특징을 추출하고 이에 대한 유추론적 수학의 해석으로서 추구하고자 하는 크게에 대한 특성 실험을 예측할 수 있고 최적 설계상의 데이터를 사전에 검증하므로 수요자가 요구하는 설계 표본을 이끌어 낼 수 있다. 본 연구에서는 설계자가 계산기를 이용한 계열화 설계에 있어서의 유추론적 알고리즘과 설계정수 및 제한요소들의 처리 방법을 제시하고 각종 임의의 계열화 기기에 대한 단계별 기능 및 기술적인 데이터의 유도 과정을 액츄에이터를 모델로 선정하여 분석했다.

• 한국건축시공학회지
• /
• 제22권4호
• /
• pp.347-358
• /
• 2022

국내 건축물 설계 및 시공단계에서의 BIM 적용에 대한 건설 전반적 운영의 기대치인 설계 BIM의 재활용 및 시공단계에서 필요한 견적, 공정 등의 정보 추출 및 활용을 만족하기에는 연계되는 모바일 기술이나 단말기기의 현장 보급 및 적용이 부족한 상태이다. 따라서 본 연구에서는 이러한 BIM 세부 업무 프로세스에 대해 모바일 기술 적용의 4D 시뮬레이션 및 Test-Bed 신축건축물 대상으로 기획·계획·기본·실시설계 및 시공단계에서 3차원 3D와 공정관리 4D 시뮬레이션 및 5D 물량산출 BIM 모델과 라이브러리를 구축하고, 시공단계에서 BIM 모델을 통한 간섭체크 등 다양한 시공성 검토를 보다 효과적으로 활용하는 건설업무의 BIM 프로세스에 대한 표준화 수립을 제시하는데 목적이 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.698-701
• /
• 2005

Nowadays, because of the frequent market change and variable customer's requirements, product's life-circle is becoming shorter. So, automobile companies are forced to rapidly develop new products and efficiently reduce both manufacturing lead time and cost, with the world level quality. Among them, Press Die is not only just a bottle neck but also an important resource exerting certain effect in quality of car body appearance. Since 2000, due to efforts to reduce the time of design phase, many companies have used 3D design methods. Actually the method didn't reduce the period of design because the company didn't develop the best practice. This paper wish to solve this problem by modular based hybrid dies template.

• 한국컴퓨터산업학회논문지
• /
• 제4권12호
• /
• pp.937-942
• /
• 2003

최근에 널리 이용되고 있는 객체지향 분석 및 설계 방법에서 새롭게 EJB 기반의 컴포넌트 개발이 활성화되고 있다 일반적으로 EJB 기반 빈 생성에서는 데이터베이스를 이용한 영속적인 데이터를 사용하는 경우가 많다. 본 논문에서는 이런 환경에서 다양한 DBMS가 이용되고 있어 각각의 엔티티 빈에 종속되어 운용되고 있는 DBMS 연결을 DAO 패턴을 적용하여 분리하였고, UML을 이용하여 객체지향 설계 및 분석에서 표준화되고 정형화된 클래스를 생성할 수 있도록 최적화된 모델링을 하였다.

• 한국건축시공학회지
• /
• 제8권5호
• /
• pp.59-65
• /
• 2008

In the evaluation method of KS on the activity factor of fly ash, same amount of cement should be replaced with fly ash. Therefore, contradictory effects on concrete strength exist, i. e. strength decease due to low content of cement and strength increase of strength due to filling-pore-function of fly ash. European Committee for Standardization (CEN) specifies the method 1 to 4. adding fly ash without reducing the content of cement, for the evaluation method on activity factor of fly ash. This study investigates the applicability of the method 2 of CEN to mix design of concrete. The followings are derived ; There is a key ratio of f)y ash mixing which enhances the incremental ratio of mixing water to improve fluidity of mortar. The incremental ratio of mixing water is maximized about 11% ratio of fly ash mixing. Compressive strength most slightly increases at that ratio of fly ash mixing. Activity factor of fly ash increases as water-cement ratio becomes low and contents of fly ash becomes high. Moreover, quality of fly ash and condition of mix design affect the applicable amount of fly ash and available range of water-cement ratio. However, this method has some problems for practical purpose because activity factors of fly ash for some cases are over 1.0. Further research should be conducted to develop more useful method of evaluating activity factor of fly ash.

• 한국해양공학회지
• /
• 제36권2호
• /
• pp.125-131
• /
• 2022

Structural design for shipbuilding is generally divided into three stages: the basic, detailed, and production designs, of which the production design is the most frequently revised among the three design stages. The revision involved in production design department was approximately 61% of the total 4,211 revision members and approximately 56% of the total 710 revision cases in the survey on the number of design revisions for nine ships. In this study, members and drawings with a high revision rate were investigated, and related design departments were identified. In addition, the work contents of the design department were analyzed to reduce the number of design revisions and three tasks are very frequently revised were selected. A survey was conducted with engineers engaged in the production design, after which, standards were proposed for the method of aggregating bills of materials, to employ macros to calculate the length of members and that of profile input data when reviewing drawings. Via the study, it was determined that the major causes of design revision are simple mistakes by engineers or lack of understanding on structural arrangement of basic members more than intricacies of prior design and high level specification. As a result of applying the proposed standards, it was confirmed that the design revision was reduced by approximately 40%.