• Journal of Microbiology and Biotechnology
• /
• 제16권12호
• /
• pp.1940-1946
• /
• 2006

The influence of environmental conditions on the ganoderic acid (GA) content in the fungus Ganoderma lucidum was investigated using a one-factor-at-a-time design and orthogonal design. Among the various medium components examined, sucrose, soybean powder or peptone, ferrous sulfate, and pH 6.0 were the most suitable carbon source (factor A), nitrogen source (factor B), mineral source (factor C), and initial pH (factor D), respectively, for the GA content in the one-factor-at-a-time design. According to the orthogonal design, the order of effect for the four factors on the GA content was A>C>D>B. The best level of factor A was $A_2$ (sucrose) with a value of +0.34 mg/100 mg DW. The optimal treatment combination was $A_2B_1C_3D_1$ with which the GA content reached up to 2.63$\pm$0.011 mg/100 mg DW. The interactions between the mineral ion and the nitrogen source, and the mineral ion and the pH were both highly significant (P<0.01). The highest interaction effect was ($B_2{\times}D_2$) with a value of +0.19 mg/100 mg DW, which was higher than the level effect value for $B_2$ (peptone) and D$_2$ (pH 5.0). Therefore, the results proved that interactions between factors cannot be ignored. The results also indicated the importance of the interactions between the factors, which may help to understand the metabolic pathway leading to triterpene biosynthesis and the expression and regulation of the key enzymes involved.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1251-1264
• /
• 2018

The systematic and effective design method of a Class-D current-source resonant inverter for use in an induction cooker with zero-ripple line current is presented. The design procedure is based on the principle of the Class-D current-source resonant inverter with a simplified load network model that is a parallel equivalent circuit. An induction load characterization is obtained from a large-signal excitation test-bench based on parallel load network, which is the key to an accurate design for the induction cooker system. Accordingly, the proposed scheme provides a systematic, precise, and feasible solution than the existing design method based on series-parallel load network under low-signal excitation. Moreover, a zero-ripple condition of utility-line input current is naturally preserved without any extra circuit or control. Meanwhile, a differential-mode input electromagnetic interference (EMI) filter can be eliminated, high power quality in utility-line can be obtained, and a standard-recovery diode of bridge-rectifier can be employed. The step-by-step design procedure explained with design example. The devices stress and power loss analysis of induction cooker with a parallel load network under large-signal excitation are described. A 2,500-W laboratory prototype was developed for $220-V_{rms}/50-Hz$ utility-line to verify the theoretical analysis. An efficiency of the prototype is 96% at full load.

• 한국실내디자인학회논문집
• /
• 제27호
• /
• pp.96-103
• /
• 2001

The purpose of this thesis is to study on the source, the introductive process and the phenomenon of the regional tendency into Korean modern interior design. To achieve the purpose of this study, the methods and contents are as follows : 1. Explaining the regionalism in the architecture as the source of the regional tendency. 2. Explaining the introductive process of the regional tendency in Korean modern interior design.. For that, 1)Explaining the traditional expression, the leo-corbusian expression and the organic expression with nature in Korean contemporary architecture 2)Explaining the vernacular expression and the abstract expression in Korean modern art 3. Studying the regional tendency in Korean modern interior design For that, 1)Studying the expression of Korean traditionality 2)Studying the expression of the vernacular 3)Studying the expression of the environmental affinity By theme methods and contents, we will study the introduction of the regional tendency into Korean modern interior design.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.1178-1189
• /
• 2018

In grid-connected voltage-source inverters (VSIs), when compared with a simple inductive L filter, the LCL filter has a better performance in attenuating the high frequency harmonics caused by the pulse-width modulation of power switches. However, the resonance peaks generated by the filter inductors and capacitors can make a system unstable. In terms of simplicity and filter design cost, a passive damping method is generally preferred. However, its high power loss and degradation in high frequency harmonic attenuation are significant demerits. In this paper, a mathematical design solution for a passive LCL filter to derive filter parameters suppressing the high frequency current harmonics to 0.3% is proposed. The minimum filter inductance can be obtained to reduce the size of the filter. Furthermore, a minimum damping resistance design considering a current controller is analyzed for a stable closed-loop system. The proposed design method is verified by experimental results using a 5-kW three-phase prototype inverter.

• 설비공학논문집
• /
• 제28권7호
• /
• pp.299-304
• /
• 2016

In recent years, heat source systems which have a principal effect on the performance of buildings are difficult to design optimally as a great number of design factors and constraints in large and complicated buildings need to be considered. On the other hand, it is necessary to design an optimum system combination and operation planning for energy efficiency considering Life Cycle Cost (LCC). This study suggests a multi-level and multi-objective optimization method to minimize both LCC and investment cost using a genetic algorithm targeting an office building which requires a large cooling load. The optimum method uses a two stage process to derive the system combination and the operation schedule by utilizing the input data of cooling and heating load profile and system performance characteristics calculated by dynamic energy simulation. The results were assessed by Pareto analysis and a number of Pareto optimal solutions were determined. Moreover, it was confirmed that the derived operation schedule was useful for operating the heat source systems efficiently against the building energy requirements. Consequently, the proposed optimization method is determined by a valid way if the design process is difficult to optimize.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제9권3호
• /
• pp.136-147
• /
• 2009

In this paper we analyze the influence of source/drain (S/D) extension region design for minimizing short channel effects (SCEs) in 25 nm gate length single and double gate Silicon-on-Insulator (SOI) and Germanium-on-Insulator (GOI) MOSFETs. A design methodology, by evaluatingm the ratio of the effective channel length to the natural length for the different devices (single or double gate FETs) and technology (SOI or GOI), is proposed to minimize short channel effects (SCEs). The optimization of non-overlapped gate-source/drain i.e. underlap channel architecture is extremely useful to limit the degradation in SCEs caused by the high permittivity channel materials like Germanium as compared to that exhibited in Silicon based devices. Subthreshold slope and Drain Induced Barrier Lowering results show that steeper S/D gradients along with wider spacer regions are needed to suppress SCEs in GOI single/double gate devices as compared to Silicon based MOSFETs. A design criterion is developed to evaluate the minimum spacer width associated with underlap channel design to limit SCEs in SOI/GOI MOSFETs.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
• /
• pp.105-108
• /
• 2005

The radiated noise from the automotive intake system should be predicted at the design stage. To this end, the precise measurement of in-duct acoustic source parameters of the intake system, i.e., the source strength and source impedance, is essential. Most of previous works on the measurement of acoustic source parameters were performed under a fixed engine speed condition. However, the requirement of vehicle manufacturer is the noise radiation pattern as a function of engine speed. In this study, the direct method was employed to measure the source parameters of engine intake system under a fixed engine speed and engine run-up condition. It was noted that the frequency spectra of source impedance hardly changes with varying the engine speed. Thus, it is reasonable to calculate the source strength under the engine run-up condition by assuming that source impedance is invariant with engine speed. Measured and conventional source models, i.e., constant pressure source, constant velocity source, and non-reflective source, were utilized to predict insertion loss and radiated sound pressure level. A reasonable prediction accuracy of radiated sound pressure level spectra from the intake system was given in the test vehicle when using the measured source characteristics which were acquired under the operating condition.

• 한국의상디자인학회지
• /
• 제19권2호
• /
• pp.117-128
• /
• 2017

This study confirmed the types of shopping information sources during travel abroad, and developed a profile of tourists in terms of demographics, travel, and shopping behavior. Shopping information sources and characteristics of shopping products were identified first. Thereafter, travelers were segmented by their information-seeking behavior. An online survey method was used to get data from Korean vacationers in their 20s-50s, while factor analysis, cluster analysis, ${\chi}^2$ test and ANOVA were applied to analyze data. The results were as follows. First, the shopping information sources of overseas tourists were composed of four factors including sources from travel agents/media, information from travel books and local sources, and word-of-mouth sources. Also, four factors in product types and four product attributes were identified. Second, tourists were clustered into two groups, active and passive shopping information seekers, based on shopping source behavior. Third, two groups differed in terms of demographics, showing an older age and higher income for active shopping source seekers. Active shopping information users tended to join package trips with family members, and they were more satisfied with the trip. With regard to shopping, active shopping source seekers spent more money for shopping and preferred all kinds of shopping goods with an emphasis on travel shopping. In conclusion, shopping information sources seemed to be a meaningful tool for segmenting tourists. Rich, older, family tourists would be an major target market for local retailers.

• 한국전자통신학회논문지
• /
• 제8권2호
• /
• pp.219-226
• /
• 2013

무선 센서 네트워크에 있어서 전역 도청에 대응하는 통신 근원지와 도착치의 위치기밀을 유지하기 위해서는 수많은 속임수용 더미 패킷들이 지속적으로 발행된다. 근원지나 도착지를 포함하는 특정 크기의 보호구역들을 설정한 후, 이 안의 노들들에 대해서만 데이터전송 중에 더미 패킷들을 생성하도록 제한하여 근원지와 도착지의 위치기밀성을 제공하면서도 패킷발생량을 줄이는 접근방안을 고려한다. 제안 프로토콜을 설계하고 형식화한 상세한 프로토콜 명세서를 제시한 후, 주요 특성과 정확성을 검증한다.

• 한국전기전자재료학회논문지
• /
• 제35권5호
• /
• pp.466-470
• /
• 2022

In order to widely disseminate LED lighting, LED lighting technology that directly uses AC commercial power has been recently introduced. AC powered LED lighting technology has a problem in that the light brightness of the LED changes because the voltage applied to the LED and the current flowing through the LED continuously change. In this study, when the LED current is greater than the design current, the current control signal generated by the controller is supplied to the current source to supply only the design current to the LED by increasing the voltage drop at the current source. If it is smaller than the design current, the controller is adjusted so that the current is supplied only to the LED without a voltage drop in the current source. It can be seen that the higher the maximum rectified voltage, the faster the lighting time of the LED light emitting block is, so that the power factor of the LED lighting is improved. The LED lighting technology proposed in this study enables LED lighting with constant light brightness, reduced power consumption, and long lifetime.