• The Research Journal of the Costume Culture
• /
• v.10 no.2
• /
• pp.103-115
• /
• 2002

The purpose of this study is to investigate the consumers′ cognition and buying behavior on sports brand character. Since the character industries are booming, this study focused on the source and the expression method of sports brand characters that are already known to consumers. Subjects of this study were university students who were interested in sports brand characters, living in Seoul and Kyenggi-do. The questionnaire were developed based on the previous studies. Data were analysed by Frequency analysis, ANOVA, Duncan Test, and Spearman′s Rho. The results were as follows: 1. The most preferred source of sports brands character was "illustrated human figure"(i.e. a famous athlete like Michael Jordan). And the most favorite expression method of character was the combination of letter and symbol as the character of ASICS and NIKE. 2. The important design factors of sports brand character were the symbolism and aesthetics. The consumer recognized NIKE as the most well-designed character design. 3. Consumers′ preference of sports brand was found to be NIKE, REEBOK, ADIDAS, and FILA, in order. The reasons for preference were the design, the brand image, and the quality. On the other hand, the most frequently purchased brand was NIKE, FILA, and ADIDAS in order. Most of the purchase took place in the brand outlet store, and the consumers usually came with their friends for purchase of sports brand. The display of store was the consumers′ major source of information. 4. The preference group of sports brand character recognized more importantly color, design, brand, and especially fashionability than the non-preference group. And the most important criteria for brand selection were design, price, and comfort orderly. 5. Female consumers recognized more importantly color, design, brand, and others′ recommendations than male consumers. The aged consumers recognized importantly durability, comfort, and quality.

• Journal of Power Electronics
• /
• v.19 no.4
• /
• pp.881-893
• /
• 2019

This paper proposes a practical sliding-mode controller design for shaping the impedances of cascaded boost-converter power decoupling circuits for reducing the second order harmonic ripple in photovoltaic (PV) current. The cascaded double-boost converter, when used as power decoupling circuit, has some advantages in terms of a high step-up voltage-ratio, a small number of switches and a better efficiency when compared to conventional topologies. From these features, it can be seen that this topology is suitable for residential (PV) rooftop systems. However, a robust controller design capable of rejecting double frequency inverter ripple from passing to the (PV) source is a challenge. The design constraints are related to the principle of the impedance-shaping technique to maximize the output impedance of the input-side boost converter, to block the double frequency PV current ripple component, and to prevent it from passing to the source without degrading the system dynamic responses. The design has a small recovery time in the presence of transients with a low overshoot or undershoot. Moreover, the proposed controller ensures that the ripple component swings freely within a voltage-gap between the (PV) and the DC-link voltages by the small capacitance of the auxiliary DC-link for electrolytic-capacitor elimination. The second boost controls the main DC-link voltage tightly within a satisfactory ripple range. The inverter controller performs maximum power point tracking (MPPT) for the input voltage source using ripple correlation control (RCC). The robustness of the proposed control was verified by varying system parameters under different load conditions. Finally, the proposed controller was verified by simulation and experimental results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.284-284
• /
• 2009

The LED of cultivation edible plants was compliance the variable of the photo-receptor pigment with the red light source and ultra red light source from long wave region. The mechanism of cultivation edible plants for each part was necessary the wavelength unit which is appropriate, the illuminant source, motor control and lens design of LED light source about plant. The photo-receptor pigment induces for a long daytime recognition, seed germination and anthesis etc, induction years exists in the state which is an inactivity within the cells and in compliance with the red light source to be converted in active

• Journal of KSNVE
• /
• v.7 no.4
• /
• pp.621-629
• /
• 1997

For computer aided design and costruction of low noisy power plants, indoor and outdoor noise prediction program has been developed. The program utilizes the predefined data of noise sources and building materials and has the faculty to estimate the source level using the empirical formula in case of the measured data not being available. In the noise prediction, the mutual noise propagation between indoor and outdoor sites are considered. The outdoor noise source in the calculation of geometric divergence effects is modelled as the omni-directional finite line or planar source according to the source geometry and the receiving points. Outdoor noise prediction is carried out to consider the diffraction effect due to plant structures as well as the attenuation effect due to atmospheric absorption and soft ground. The results of indoor and outdoor noise prediction for a recently constructed diesel engine power plant show good agreement with the measured.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1648-1649
• /
• 2011

본 논문에서는 무선 전력 전송을 위한 10W RF Power Source를 설계 및 제작, 측정 하였다. 제작된 RF Power Source는 9~11MHz의 신호 생성을 위한 DDS와 전력 증폭을 위한 전력 증폭기로 구성되어 있다. 근거리 무선 전력 전송은 전자기 유도 또는 전자기 공진 형태의 무선으로 전력을 전달하게 되므로 전력 증폭기의 부하단의 임피던스가 변하게 되어 전력 증폭기의 특성의 변화가 생기는 단점을 가지고 있다. 이러한 단점을 극복하기 위해 본 논문에서는 부하단의 임피던스 변화에 둔감하도록 평형(Balanced)구조를 이용하여 전력 증폭기를 설계하였다. 제작된 RF Power Source는 입력 전원 DC 24V, 소모 전류 1.5A, 사용가능 주파수범위는 9~11MHz, 최대 출력 전력 10W의 특성을 보였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.6 s.99
• /
• pp.738-748
• /
• 2005

The ship radiated noise level fluctuates by the difference of interference and reverberation according to measurement methods and environmental conditions. These phenomena cause error of the source level estimation even in the same environment conditions. This paper describes a quantitative analysis and a reduction method for an error value to the source level estimation in spatial and temporal interference environment. The design criteria of the radiated noise measurement array composed of omni-directional hydrophones and the source level accuracy in the deep water range are given. The source level accuracy in the shallow water range is also derived based on the statistical model of the multiple reflection paths. The results are verified using the water tank experiment and the sea trial.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.2
• /
• pp.66-72
• /
• 2014

Ground source heat pump system can achieve high efficiency of performance by utilizing annually constant underground temperature to provide heat source for space heating and cooling. Generally, the depth of constant-temperature zone under the ground depends on surface heat flux and soil properties. The deeper the ground heat exchanger is installed, the higher the heat exchange rate can be acquired. However, in order to optimally design the system, it is necessary to consider both the installation cost and the system performance. In this study, performance analysis of ground source heat pump system according to the depth has been conducted through the case study.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.247-249
• /
• 2004

Electric systems can be classified into two classes on the basis of the location of its energy source. One system is to be connected with its outside energy source. Obviously, these electric system is limited of its motion range and impossible to operate in the situation without a way to find an energy source nearby. another is to posses the energy source within it. These electric systems are free of motion range limit while their using is limited by the life of source. These limits can be tided over by using passive-type RF communication. RF-ID is a system that Is possible to interchange electricity and data by Radio Frequency to locate and identify various objects including a man.

• Journal of computational fluids engineering
• /
• v.19 no.1
• /
• pp.15-20
• /
• 2014

Accurate simulation of free-surface wave flows around a ship is very important for better hull-form design. In this paper, a computational fluid dynamics (CFD) code, termed SNUFOAM, which is based on the open source libraries, OpenFOAM, was developed to predict the wave patterns around a ship. Additional anti-diffusion source term for minimizing a numerical diffusion, which was caused by convection differencing scheme, was considered in the volume-fraction transport equation. The influence of the anti-diffusion source term was tested by applying it to free-surface wave flow around the Wigley model ship. In results, the band width of the volume fraction contours between 0.1 to 0.9 at the hull surface was narrowed by considering the anti-diffusion term.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2014

In order to evaluate the performance of ground heat source in thermal labyrinth on pre-heating in winter season and pre-cooling in summer season, the followings are made as a conclusion through case study of H project by using the weather data from Korea meteorological administration and CFD model. By making outdoor air inlet via ground heat source in thermal labyrinth for conduction, convection and etc., the temperature rise is $13.4^{\circ}C$as the effect of pre-heating in winter season. On the other hand, as the effect of pre-cooling in summer season, the temperature decrease is $7.2^{\circ}C$. The energy saving rate by the application of ground heat source in thermal labyrinth is 9.1%.