• 물과 미래
• /
• 제14권4호
• /
• pp.27-34
• /
• 1981

The design flow of the urban strom drainage systems has been assessed largely on a basis of empirical relations between rainfall and runoff, and the rational formula has been widely used for the cities in our country. In order to estimate it more accurately, the urban runoff simulation model based on the RRl method has been developed and applied to the sample basin in this study. The rainfall hyetograph of the design stromfor the design flow has been obtained by the determination of the total rainfall and the temporal distributions of that rainfall. The total rainfall has been assessed from the empirical formula of rainfall intensity and the temporal distribution of that rainfall determined on the basis of Huff's method from the historical rainfall data of the basin. The virtual inflow hydrograph to each inlet of the basin has been constructed by computing the series of discharges in each time increment, using design strom hyetograph and time-area diagram. The actual runoff hydrograph at the basin outlet has been computed from the virtual inflow hydrographs by developing a relations between discharge and storage for the watershed. The discharge data for verification of the simulated runoff hydrograph are not available in the sample basin and so the sensitivity analysis of the simulation model has not been possible. The peak discharge for the design of drainage systems has been estimated from the computed runoff hydrograph at the basin outlet and compared to thatl obtained form the rational formula.

• 한국지반신소재학회논문집
• /
• 제11권4호
• /
• pp.63-69
• /
• 2012

우리나라는 기후변화에 따른 국지성 호우의 증가로 비탈면 붕괴와 같은 재해 가능성이 높아지고 있으며, 이러한 재해를 사전에 예방하기 위해 "건설공사 비탈면 설계기준"에 관련 지침사항을 규정하고 있다. 최근에는 관련 지침 중 기존의 우기시 비탈면 안정성 검토 방법이 강우의 침투를 고려하여 보다 현실적으로 수행할 수 있도록 개정되었다. 본 연구에서는 이러한 동향에 따라 통일분류법에 따른 흙의 종류와 강우강도별 포화깊이를 분석하였다. 분석 결과, 전반적으로 투수계수와 강우강도가 클수록 포화깊이도 비례하여 증가하는 양상을 보였으나 MH, CL에서는 포화영역이 발생하지 않았다. 또한 선행강우를 해석상에 반영한 경우에 포화깊이가 전반적으로 증가하였으며, 강우량이 많은 경우 보다 적은 경우에 포화영역의 증가율이 높은 것으로 나타났다.

• 대한토목학회논문집
• /
• 제12권4호
• /
• pp.135-143
• /
• 1992

도시유역의 수공계획 수립에 있어서 확률강우량은 중요한 설계수문량이다. 본 연구는 서울지방 통합형 확률강우강도식을 유도제시한 것으로서, 서울의 확률강우강도식은 Talbot, Sherman 및 Japanese형을 기본으로 하고 있으나 이는 통합형 확률강우강도식으로 단일화 될 수 있으며 기 발표형보다 서울지방의 확률강우량에 더 적합하다. 특히 전지속기간 자료인 경우에는 기 발표형보다 그 적용성이 두드러진다. 서울지방의 통합형 확률강우강도식의 계수 n 값은 재현기간의 증대에 따라 작아지고 강우지속기간의 증대에 따라 커지는 경향이 있으며, 계수 b 값은 자료집단의 구분에 관계없이 재현기간의 증대에 따라서 감소하는 것으로 나타났다. 단시간 자료인 경우 n 값은 0.55~0.60, 장시간인 경우 0.60~0.82이고 전시간 자료에 대하여는 0.60~0.66을 나타내었다.

• Wind and Structures
• /
• 제29권4호
• /
• pp.247-270
• /
• 2019

Wind-resistant design of existing cooling tower structures overlooks the impacts of rainfall. However, rainstorm will influence aerodynamic force on the tower surface directly. Under this circumstance, the structural response of the super-large cooling tower (SLCT) will become more complicated, and then the stability and safety of SLCT will receive significant impact. In this paper, surrounding wind fields of the world highest (210 m) cooling tower in Northwest China underthree typical wind velocities were simulated based on the wind-rain two-way coupling algorithm. Next, wind-rain coupling synchronous iteration calculations were conducted under 9 different wind speed-rainfall intensity combinations by adding the discrete phase model (DPM). On this basis, the influencing laws of different wind speed-rainfall intensity combinations on wind-driving rain, adhesive force of rain drops and rain pressure coefficients were discussed. The acting mechanisms of speed line, turbulence energy strength as well as running speed and trajectory of rain drops on structural surface in the wind-rain coupling field were disclosed. Moreover, the fitting formula of wind-rain coupling equivalent pressure coefficient of the cooling tower was proposed. A systematic contrast analysis on its 3D distribution pattern was carried out. Finally, coupling model of SLCT under different working conditions was constructed by combining the finite element method. Structural response, buckling stability and local stability of SLCT under different wind velocities and wind speed-rainfall intensity combinations were compared and analyzed. Major research conclusions can provide references to determine loads of similar SLCT accurately under extremely complicated working conditions.

• 한국조경학회지
• /
• 제48권3호
• /
• pp.34-44
• /
• 2020

본 연구는 식생기반 LID 시스템 모델을 기반으로 생태적 구성요소의 성능 분석 방향을 제시하기 위해, SWMM 전산모의와 강우·유출 모의장치를 이용하여 모니터링 결과 간의 통계적 유의성을 분석하고, 시스템 사전설계에 요구되는 기초자료를 제공하고자 한다. 또한, 선행연구에서 상대적으로 논의가 부족했던 식생기반 LID 시스템의 토양, 식생 모델 및 분석 방안을 종합하고, 장치형 LID 시스템을 대체할 수 있는 성능 정량화 방향을 제시하려 한다. 인공강우재현 모니터링 40분 경과 후 실험구와 대조구 모두 최대강우강도인 142.91mm/hr(n=3, sd=0.34), 142.24mm/hr(n=3, sd=0.90)로 집계되었다. 우량주상도 대비 10분, 50분 구간은 낮은 강우강도가 재현되었으며, 20분, 30분, 40분 구간은 높은 강우강도가 확인되었다. 우수유출 지연효과의 경우, 실험구의 유출강도 저감량은 대조구의 최대유출강도가 발생된 50분에 0.46mm/min을 기록하여, 79.8% 저감된 것으로 분석되었다. 전산모의의 경우, 실험구의 유출강도 저감량은 대조구의 최대유출강도가 발생된 50분에 0.05mm/min을 기록하여, 99.1% 저감된 것으로 모의되었다. 최대 강우유출강도의 경우, 실험구(Dv=30.35, NSE=0.36)는 인공강우 모니터링과 SWMM 전산모의가 동일하게 70분에 각각 0.77mm/min, 1.06mm/min을 기록하였다. 대조구(Dv=17.27, NSE=0.78)도 동일하게 50분에 각각 2.26mm/min, 2.38mm/min으로 집계되었다. 상기 연구결과를 통해 강우·유출 모의장치와 SWMM 전산모의 간의 통계적 유의성을 통해 단일 식생이 적용된 LID 시스템의 우수유출저감 성능의 사전설계 방향을 제시할 수 있었다. 또한, LID 시스템의 토양, 식생 모델 및 분석방법을 종합하여, 사전설계와 연계 가능한 식생 및 토양 부문의 매개변수 정량화 방안이 정리되었다. 다만, 단일 식생기반 LID 시스템으로 유형과 물리적 변수가 제한되었고, 모니터링, 전산모의 결과 간의 통계적 유의성 보정에 요구되는 알고리즘 연구가 후속되어야 할 것으로 판단된다.

• 상하수도학회지
• /
• 제23권5호
• /
• pp.599-608
• /
• 2009

This manuscript covers the results of field investigation and lab-scale experiments to design a double-layered biofilter system to control urban storm runoff. The biofilter system consisted of a coarse soil layer (CSL) for filtration and fine soil layer (FSL) for adsorption and biological degradation. The variations of flow rate and water quality of runoff from a local expressway were monitored for seven storm events. Laboratory column experiments were performed using seven kinds of soil and mulch to maximize pollutants removal. The site mean concentration (SMC) of storm runoff from the drainage area (runoff coefficient: 0.92) was measured to be 203 mg/L for SS, 307 mg/L for $TCOD_{Cr}$, 12.3 mg/L for TN, 7.3 mg/L for ${NH_4}^+-N$, and 0.79 mg/L for TP, respectively. This study employed a new design concept, to cover the maximum rainfall intensity with one month recurrence interval. Effective storms for last ten years (1998-2007) in seoul suggested the design rainfull intensity to be 8.8 mm/hr Single layer soil column showed the maximum removal rate of pollutants load when the uniformity coefficient of CSL was 1.58 and the silt/clay contents of FSL was virtually 7%. The removal efficiency during operation of double layer soil column was 98% for SS and turbidity, 75% for TCODCr, 56% for ${NH_4}^+-N$, 87% for TP, and 73-91% for heavy metals. The hydraulic conductivity of the soil column, 0.023 cm/sec, suggested that the surface area of the biofilter system should be about 1% of the drainage area to treat the rainfall intensity of one month recurrence interval.

• 상하수도학회지
• /
• 제23권3호
• /
• pp.271-276
• /
• 2009

Under current design standard, sewers are designed to drain stormwater generated up to 10 year return period of storms. This implies sewer flooding could occur from rainfall exceeding a 10 year return period. 5, 10, 20 and 30 year return period of storm intensities were calculated for 22 locations (cities) of meterological stations over the nation and compared to the recorded rainfall intensities for the last 30 years. The comparison resulted in the numbers of year maximum rainfall intensities exceeded each return period. Using the questionnaire survey for "the incidences of flooding since 1980" of the previous paper (Survey on sewerage operation/management planning for flooding (I)), the actual rainfall records on the date of flooding events were analyzed to demonstrate the number of flooding events caused by the exceedance of sewer capacity. For the last 30 years, more than 6 years of year maximum rainfall intensity (20%) were larger than the 10 year return period of storm in 4 cities of the 22 used for the first analysis. The number of rainfall records that exceeded the 10 year return period was 50 of the 260 actual flooding events investigated from the survey.

• 한국환경과학회지
• /
• 제29권9호
• /
• pp.871-883
• /
• 2020

Due to recent heavy rain events, there are increasing demands for adapting infrastructure design, including drainage facilities in urban basins. Therefore, a clear definition of urban rainfall must be provided; however, currently, such a definition is unavailable. In this study, urban rainfall is defined as a rainfall event that has the potential to cause water-related disasters such as floods and landslides in urban areas. Moreover, based on design rainfall, these disasters are defined as those that causes excess design flooding due to certain rainfall events. These heavy rain scenarios require that the design of various urban rainfall facilities consider design rainfall in the target years of their life cycle, for disaster prevention. The average frequency of heavy rain in each region, inland and coastal areas, was analyzed through a frequency analysis of the highest annual rainfall in the past year. The potential change in future rainfall intensity changes the service level of the infrastructure related to hand-to-hand construction; therefore, the target year and design rainfall considering the climate change premium were presented. Finally, the change in dimensional safety according to the RCP8.5 climate change scenario was predicted.

• 대한토목학회논문집
• /
• 제33권3호
• /
• pp.1027-1035
• /
• 2013

사면안정 해석 시, 사면파괴의 주원인인 강우사상의 현실적 접목을 위하여 본 연구에서는 다음 두 가지 방법을 채택하였다. 하나는 시간에 따른 강우량 변화의 영향을 무시한 기존의 설계강우 방식인 I.D.F(Intensity-Duration-Frequency)곡선을 이용하는 방법이며, 다른 하나는 시간의 영향을 고려하여 강우사상을 표현한 Huff 방법이다. 먼저 I.D.F 방법의 강우사상을 적용하여 선행강우효과를 나타내는 초기흡수력의 변화에 따른 사면의 안전율의 변화를 알아보았다. 또한, 두 강우사상의 방식을 적용하여 강우사상이 사면의 안전율 변화에 미치는 영향을 규명하고자 하였다. 그 결과, Huff 방법의 강우사상이 I.D.F 방법보다 더 현실적으로 사면의 안전성 평가가 이루어 질 수 있음을 확인할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제70권4호
• /
• pp.479-497
• /
• 2019

In the current code design, the use of a uniform internal pressure coefficient of cooling towers as internal suction cannot reflect the 3D characteristics of flow field inside the tower body with different ventilation rate of shutters. Moreover, extreme weather such as heavy rain also has a direct impact on aerodynamic force on the internal surface and changes the turbulence effect of pulsating wind. In this study, the world's tallest cooling tower under construction, which stands 210m, is taken as the research object. The algorithm for two-way coupling between wind and rain is adopted. Simulation of wind field and raindrops is performed iteratively using continuous phase and discrete phase models, respectively, under the general principles of computational fluid dynamics (CFD). Firstly, the rule of influence of 9 combinations of wind speed and rainfall intensity on the volume of wind-driven rain, additional action force of raindrops and equivalent internal pressure coefficient of the tower body is analyzed. The combination of wind velocity and rainfall intensity that is most unfavorable to the cooling tower in terms of distribution of internal pressure coefficient is identified. On this basis, the wind/rain loads, distribution of aerodynamic force and working mechanism of internal pressures of the cooling tower under the most unfavorable working condition are compared between the four ventilation rates of shutters (0%, 15%, 30% and 100%). The results show that the amount of raindrops captured by the internal surface of the tower decreases as the wind velocity increases, and increases along with the rainfall intensity and ventilation rate of the shutters. The maximum value of rain-induced pressure coefficient is 0.013. The research findings lay the basis for determining the precise values of internal surface loads of cooling tower under extreme weather conditions.