• Physical Therapy Korea
• /
• v.13 no.3
• /
• pp.33-40
• /
• 2006

The purpose of this study was to assess the effects of High-Voltage Pulsed Current (HVPC) and ultrasound on adjuvant-induced arthritis in rats. Adjuvant arthritis was induced in female Sprauge-Dawley rats by the subcutaneous injection of a single dose of $.1m{\ell}$ of Complete Freund's Adjuvant (CFA) (1 mg of Mycobacterium Butyricum suspended in $.1m{\ell}$ paraffin oil) into the right hind paw. A randomized, parallel-groups design of 24 subjects was used. All rats were randomly assigned to control (n=8), ultrasound (n=8), and HVPC (n=8) were compared with those of injured rats. The rats in the pulsed ultrasound group were treated at 1 MHz frequency with $.5W/cm^2$ intensity in 1:4 mode for 5 minutes per day. The rats in the HVPC group were treated at 120 pulses per second and $50{\mu}s$ phase duration, 20 mA intensity for 30 min per day. Treatment was done in the left and right hind limb for 2 weeks. We evaluated clinical, radiographic, hematologic and histopathologic findings before and after treatment and obtained the following results. 1. Edema of the right hind paw was more significantly reduced in the ultrasound and HVPC groups than the control group on days 9, 12, and 14 (p<.05). Edema of the left hind paw was more significantly reduced in ultrasound and HVPC groups than the control group on days 12, 14 (p<.05). 2. WBC counts of the ultrasound and HVPC groups as compared with the control group were becoming remarkably decreased after the treatment. 3. In radiologic findings, arthritis formation was seen according to the score of arthritis, which was the highest in the control group, upon the observation of radiographs of the left and right hind paws. However, no statistically significant difference was present in the score within three groups. 4. In the histopathologic findings, ultrasound and HVPC groups had effectively suppressed erosions of articular cartilage and inflammatory cell infiltrations. Therefore, the results of the study show that rats that were treated with the ultrasound and HVPC effectively suppressed adjuvant arthritis. However, no statistically significant difference was present between the ultrasound group and the HVPC group.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.1
• /
• pp.31-44
• /
• 2008

The 1st phase framework data implementation of National Geographic Information Systems (NGIS) used 1:5,000 digital map with 5 years updating period which is lacking in the latest information. This is a significant factor which hinders the use of framework data. This study proposed the efficient technical method of a location based object data management and system implementation for updating framework data. First, we did an object-oriented data modeling and database design using a location based features identifier(UFID: Unique Feature IDentifier). The second, we developed the system with various functions such as a location based UFID creation, input and output, a spatial and attribute data editing, an object based data processing using UML(Unified Modeling Language). Finally, we applied the system to the study area and got high quality data of 99% accuracy and 35% benefit effect of personnel expenses compare to the previous method. We expect that this study can contribute to the maintenance of national framework data as well as the revitalization of various GIS markets by providing user the latest framework data and that we can develop the methods of a feature-change modeling and monitoring using an object based data management.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1589-1597
• /
• 2014

For several decades, economic growth has achieved in the aspect of productivity and effectiveness not environmental friendly. As a result, global warming is a major agenda to solve. Therefore, global effort to sustainable development has been adopted like UNFCCC and Kyoto protocol that aimed to reduce greenhouse gas. However, the construction industry has only focused on applying techniques for using less energy sources not monitoring sustainable construction and development. Therefore, this study developed a tool for monitoring greenhouse gas emissions in construction industry. The proposed system evaluates and estimates BAU (Business as usual) for each phase of a construction project. For this purpose, analyzed the greenhouse gas emission factors coincide to life cycle of a construction project. The scope of monitoring is determined according to data availability and emission factor. Then, the system framework is developed and the calculation logic is proposed the system features provide comparison between the emission estimates for eco-friendly design and the actual emission of construction and operation phases. The system would be utilized as a tool for supporting to green construction realization and green construction performance evaluation.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.5
• /
• pp.3-12
• /
• 2014

With the scale of program management getting larger and complexity, More accurate and precise method for management cost estimate is demanded. However, most of project management cost estimates are based on similar cases and hence can not reflect distinct features of each project. Cost estimate precision is also not up to the standards, and also troublesome to policy-making and budget allocation. Therefore, project typical model for cost estimate of Comprehensive Project Management is developed, and makes it easier to manage level of effort and allocate cost by applying characteristic factor of each project. This study categorized the project package by phase; planning, detailed design, and bid procurement, to develop typical model. And by designating specific level of effort required for each field and rank, the study aims to improve the method for calculating the detailed and objective program cost. Outcome of this study will prevent conflicts between client and contractor, accurately calculate program management contract cost for the client, and become a reference for the contractor to receive rational and practical payments for their work.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.5
• /
• pp.40-48
• /
• 2014

As CBR(Chemical, Biological, and Radiological) attack increases, the importance of CBR protective facilities is being emphasized. When CBR warfare emerges, a task force team, who exist outside of CBR protective facility, should enter the CBR protective facility through neutralizing process in CCA(Contamination Control Area) and TFA(Toxic Free Area). If a bottleneck occurs in the process or zones, the task force team cannot enter the CBR protective facility efficiently and may cause inefficiency in its operation performance or result in casualties. The current design criteria of the CBR protective facility is only limited to ventilation system and it does not consider how much time it takes to enter the facility. Therefore, this research aims to propose the entering time estimation model with discrete event simulation. To make the simulation model, the procedure performed through CCA and TFA is defined and segmented. The actual time of the procedure are measured and adapted for the simulation model. After running the simulation model, variables effecting the entering time are selected for alternatives with adjustments. This entering time estimation model for CBR protective facility is expected to help take time into consideration during the designing phase of CBR protective facility and help CBR protective facility managers to plan facility operation in a more realistic approach.

• Journal of Energy Engineering
• /
• v.20 no.1
• /
• pp.13-20
• /
• 2011

The high fuel flexibility of Micro Gas Turbine(MGT) has boosted their use in a wide variety of applications. Recently, the demand for biogas generated from the digestion of organic wastes and landfill as a fuel for gas turbines has increased. We researched the influence of firing landfill gas(LFG) on the performance and operating characteristics of a micro gas turbine combined heat and power system. $CH_4$ and $CO_2$ simultaneous recovery process has been developed for field plant scale to provide an isothermal, low operating cost method for carrying out the contaminants removal in Land Fill Gas(LFG) by liquid phase catalyst for introduce into the green house for the purpose of $CO_2$ rich cultivation of the plants. Methane purification and carbon dioxide stripping by muti panel autocirculation bubble lift column reactor utilizing Fe-EDTA was conducted for evaluate optimum conditions for land fill gas. Based on inflow rate of LFG as 0.207 $m^3$/min, 5.5 kg/$cm^2$, we designed reactor system for 70% $CH_4$ and 27% $CO_2$ gas introduce into MGT system with $H_2S$ 99% removal efficiency. A green house designed for four different carbon dioxide concentration from ambient air to 1500 ppm by utilizing the exhaust gas and hot water from MGT system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.10
• /
• pp.1455-1459
• /
• 2003

A $2{\times}3$ factorial design was used to study the impact of rearing systems, individual (I) vs. group (G) and different levels of milk/skim milk feeding (three schedules, F1, F2 and F3) on performance of crossbred (Bos indicus ${\times}$ Bos taurus) calves. Six calves (three from each sex) were taken in each group on the basis of their birth weight. All the calves were fed colostrum for three days and thereafter, were allotted to three different milk feeding schedules (F), i.e. milk fed upto 8 weeks of age (F1), milk upto 4 weeks followed by 50% (F2) and 100% (F3) replacement of milk with skim milk in the next 4 weeks. Calf starter and cereal green fodder were fed ad libitum to all the calves beginning from second week of age. A digestibility trial was conducted at 15th week of age to assess nutrient utilization during postweaning period. The digestibilty of dry matter (DM), organic matter, total carbohydrate, ether extract and crude protein (CP) were nonsignificant between the rearing systems and the feeding schedules. There was significantly higher digestibility of NDF and ADF in G than I and in F3 than F1 and F2. The concentration CP and total digestible nutrients of the diet ranged from 17.18 to 17.75% and 66.32 to 70.14%, respectively. The DM intake (kg/100 kg body weight) ranged from 1.74 to 2.14 kg during 0 to 8 weeks and 3.19 to 3.41 kg during 0 to 14 weeks of age. The effects during postweaning phase (9-14 weeks of age) showed increased performance in group housed calves compared to individually housed ones with a superior average daily gain (590 vs. 443 g) and dry matter intake (1.79 vs. 1.64 kg). Above all, replacement of milk with skim milk at 50% level after 4th week followed by complete removal after 6th week of age (F2) seemed to suit better in coping with immediate energy starvation due to sole feeding of skim milk (F3) and they performed the best under group housed system of rearing.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.11
• /
• pp.1650-1655
• /
• 2003

Crossbred gilts (n=54) of about $26.38{\pm}0.85kg$ body weight and 25 weeks of age were randomly divided into 18 groups of 3 animals each. Three dietary treatments viz., $T_1$, $T_2$ and $T_3$ were formulated. The treatment $T_1$ containing maize grain (35%) and wheat bran (47%) along with soybean meal and fish meals served as control diet. Rice bran (RB) was selected as a single source of fat (13.02%) and fibre (17.12%), which was gradually increased in diets $T_2$ (41%) and $T_3$ (82%) replacing maize grain and wheat bran of $T_1$ at 50% and 100% in the diets $T_2$ and $T_3$, respectively. The fat and fibre levels of the diets were thus 3.46 and 5.24, 9.31and 9.69 and 11.61and 13.26% in $T_1$, $T_2$ and $T_3$, respectively. All the diets, however, contained almost similar concentration of CP (18.35${\pm}0.29%$). Each dietary treatment was offered to six replicated groups of 3 piglets in following completely randomized design and feeding was continued for 112 days during the growing phase. Growth, feed utilization, reproductive performance, nutrient utilization and different blood biochemical parameters were studied. Growth rate, feed intake and feed conversion were lower (p<0.01) in $T_3$ in comparison to $T_1$ or $T_2$. Digestibility of all the nutrients except EE was reduced significantly (p<0.01) in $T_3$. Serum glucose level decreased (p<0.01), whereas the urea and cholesterol concentration in the blood increased (p<0.01) in $T_3$. The duration of estrus of pigs fed diet containing 82% RB ($T_3$) was highly variable within the group, but all the groups showed statistically similar duration of estrous. Feed cost per unit gain was found to be comparable between control ($T_1$) and $T_2$ group. The results indicated that RB can be included up to 41% in swine diets replacing 50% of maize and wheat bran. Higher concentrations of ether extract and fibre beyond 9.31 and 9.69% in diet had detrimental effect on growth, nutrient utilization and reproductive performance.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.4
• /
• pp.393-400
• /
• 2015

This study proposes a method to create and combine a superstructure module by parametric modeling, in order to improve the production efficiency of information model for modular steel bridge superstructure that can be used in planning, design and construction phase. Compound classification was performed in order to derive elements to apply the parametric modeling, and according to assembly condition, the classified elements were grouped into 13 types. In addition, three assembly conditions were derived for production of stable superstructure through combination of superstructure module, which is a production unit for modular steel bridge factory. Parameter that reflects assembly condition in compound shape when producing superstructure module through parametric modeling was deducted. Superstructure module compounds were produced according to type and parameter using interface generation based on Building Information Model(BIM) software that was developed in this study. The superstructure module produced reflects information to combine into a superstructure. To verify this, information model based on Industry Foundation Classes(IFC) was built and confirmed the application in production of superstructure by identifying the reflected property information.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.7 s.337
• /
• pp.41-48
• /
• 2005

We design and fabricate 3-dB tandem directional coupler using the coplanar waveguide structure which is applicable to balanced amplifiers and mixers for 60 GHz wireless local area network system. The coupler comprises the multiple-sectional parallel-coupled lines to facilitate the fabrication process, and enable smaller device size and higher directivity than those of the conventional 3-dB coupler employing the edge-coupled line. In this study, we adopt the structure of two-sectional parallel-coupled lines of which each single-coupled line has a coupling coefficient of -8.34 dB and airbridge structure to monolithically materialize the uniplanar coupler structure instead of using the conventional multilayer or bonded structure. The airbridge structure also supports to minimize the parasitic components and maintain desirable device performance in V-band (50$\~$75 GHz). The measured results from the fabricated couplers show couplings of 3.S$\~$4 dB and phase differences of 87.5$^{\circ}{\pm}1^{\circ}$ in V-band range and show directivities higher than 30 dB at a frequency of 60 GHz.