• International Journal of Naval Architecture and Ocean Engineering
• /
• v.2 no.4
• /
• pp.195-199
• /
• 2010

This paper addresses the problem of B-spline surface interpolation of scattered points for a hull form design, which are not arbitrarily scattered, but can be arranged in a series of contours permitting variable number of points in the contours. A new approach that allows different parameter value for each point on the same contour has been adopted. The usefulness and quality of the interpolation has been demonstrated with some experimental results.

• Journal of the Korean Society for Precision Engineering
• /
• v.6 no.3
• /
• pp.46-59
• /
• 1989

The purpose of test fixture is to mechanically couple energy from a shaker into a test specimen. And then it is necessary to design a fixture of shich the fundamental natural frequency is over than one half times as high as the highest frequency of interest. But the dynamic behavior of vibration test fixture is usually different from, often far different from, what has been calculated. In this paper, the optimal dimensionless frequency parameter, ${lambda}$'s, are calculated from the test results of a various and complex shaped fixtures.

• Tribology and Lubricants
• /
• v.10 no.3
• /
• pp.12-17
• /
• 1994

Minimum clearance between the U-cup seal groove of a piston and a cylinder bore to ensure against extrusion of the U-cup ring and leakage of working fluids is an important design parameter for a seal designer in hydraulic cylinder applications. Therefore, typical U-cup seal of a hydraulic actuator has been analyzed as a function of a sealing gap using the nonlinear FEM software MARC. In this study, the useful design data were presented as a function of the sealing gap and the sealed hydraulic pressure.

• 한국데이터정보과학회:학술대회논문집
• /
• 2002.06a
• /
• pp.97-106
• /
• 2002

Taguchi parameter design, the product-array approach using orthogonal arrays is mainly used. However, it often requires an excessive number of experiments. An alternative approach, which is called the combined-array approach, was suggested by Welch et. al. and studied by others. In these studies, only single quality characteristic was considered. We propose how to simultaneously optimize multiple quality characteristics using desirability function when we used the combined-array approach to assign control and noise factors. An example is illustrated to the combined-array approach.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.446-450
• /
• 1990

In this paper, we present a method of analysing perturbed linear system by pole sensitivity defined by the rate of pole movement with respect of perturbation. Pole sensitivity give us not only the rate of pole movement but also the directional information of the pole movement. We present a method of design of a LQR by considering the pole sensitivity and show that the suggested method guarantee the stability robustness of parameter perturbation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.313-316
• /
• 1990

This paper proposes the design of the decentralized adaptive controllers which are an arbitrary interconnection of sub-systems with unknown parameters, nonlinear ities and bounded disturbances. In order to exponentially converge the state and parameter errors, robust decentralized adaptive controllers are developed for stabilization and tracking the parameters. In the simulation studies of the decentralized adaptive control of a two-area interconnected power system, the effectiveness of the proposed adaptive schemes is demonstrated.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.168-173
• /
• 1987

The optimal Input design problem for linear system Which have the common parameters in the system and noise transfer functions. Exploiting the assumed Model structure and deriving the information matrix structure in detail, D-optimal open-loop stochastic input can be realized as an ARMA process under the Input or output variance constraints. In spite of the reduced order, It Is necessary to develop an efficient algorithms for the optimation with respect to the .rho..

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.413-416
• /
• 2001

In high frequency range, RF circuit design without considering shielding effect can cause several significant changes due to increase in parasitic capacitance and inductance between RF signal lines and shielding box. In this paper, bandpass filter has been made to measure the shielding effect and its s-parameter has been measured by Vector Network Analyzer (VNA). Equivalent circuit model including the shielding effect has been constructed with the lumped elements extracted from the 3D electromagnetic simulator, Maxwell SI. Then, the validity of the model is verified using microwave circuit simulator, ADS (Advanced Design System).

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1995.06a
• /
• pp.137-140
• /
• 1995

In the paper, CDMA's vocoder algorithm, QCELP, was analyzed. And, 16-bit programmable DSP core for QCELP was designed. When it is used two MACs in DSP, we can implement low-power DSP and estimate decrease of parameter computation speed. Also, we implemented in FIFO memory using register file to increase the access time of the data. This DSP was designed using logic synthesis tool, COMPASS, by top-down design methodology. Therefore, it is possible to cope with rapid change at mobile communication market.

• Communications for Statistical Applications and Methods
• /
• v.9 no.2
• /
• pp.337-346
• /
• 2002

Complete diallel crosses using group divisible design with m=2 or n=2 and ${\lambda}_1$<${\lambda}_2$ as parameter designs become A-optimal, D-optimal designs. In case of ${\lambda}_2$=${\lambda}_1$+1, this blocked complete diallel crosses become generalized optimal designs.