• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.11_12
• /
• pp.629-638
• /
• 2005

In the System on a Chip design, the on chip bus is one of the critical factors that decides the overall system performance. Especially, in the case or reusing the IPs such as processors, DSPs and multimedia IPs that requires higher bandwidth, the bandwidth problems of on chip bus are getting more serious. Recently ARM proposes the Multi-Layer AHB BusMatrix that is a highly efficient on chip bus to solve the bandwidth problems. The Multi-Layer AHB BusMatrix allows parallel access paths between multiple masters and slaves in a system. This is achieved by using a more complex interconnection matrix and gives the benefit of increased overall bus bandwidth, and a more flexible system architecture. However, there is one clock cycle delay for each master in existing Multi-Layer AHB BusMatrix whenever the master starts new transactions or changes the slave layers because of the Input Stage and arbitration logic realized with Moore type. In this paper, we improved the existing Multi-Layer AHB BusMatrix architecture to solve the one clock cycle delay problems and to reduce the area overhead of the Input Stage. With the elimination of the Input Stage and some restrictions on the arbitration scheme, we tan take away the one clock cycle delay and reduce the area overhead. Experimental results show that the end time of total bus transaction and the average latency time of improved Multi-Layer AHB BusMatrix are improved by $20\%\;and\;24\%$ respectively. in ease of executing a number of transactions by 4-beat incrementing burst type. Besides the total area and the clock period are reduced by $22\%\;and\;29\%$ respectively, compared with existing Multi-layer AHB BusMatrix.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.9
• /
• pp.1-8
• /
• 2010

A digital phase wrapping modulation (DPM) open-loop polar transmitter can be efficiently applied to a wideband orthogonal frequency division multiplexing (OFDM) communication system by converting in-phase and quadrature signals to envelope and phase signals and then employing the signal mapping process. This mapping process is very similar to quantization in a general communication system, and when taking into account the error that appears during mapping process, one can replace the coordinates rotation digital computer (CORDIC) algorithm in the coordinate conversion part with the Taylor series approximation method. In this paper, we investigate the application of the Taylor series approximation to the cartesian to polar coordinate conversion part of a DPM polar transmitter for wideband OFDM systems. The conventional approach relies on the CORDIC algorithm. To achieve efficient application, we perform computer simulation to measure mean square error (MSE) of the both approaches and find the minimum approximation order for the Taylor series approximation compatible to allowable error of the CORDIC algorithm in terms of hardware design. Furthermore, comparing the processing speeds of the both approaches in the implementation with FPGA reveals that the Taylor series approximation with lower order improves the processing speed in the coordinate conversion part.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.7_8
• /
• pp.408-416
• /
• 2003

An electronic cash system has to provide the security, to prevent the double spending and to support the divisibility of electronic cash for the easy of use. Divisible electronic cash system allows an electronic cash to be divided into subdivisions. Each subdivision is worth any desired value, but all values must add up to the original cash value. Divisible scheme brings some advantages. It reduces to make the change and also there is no necessity that a customer must withdraw a cash of the desired value whenever transactions occur. In this paper, we present an electronic cash protocol which provides the divisibility based on the double hash chain technique. Electronic cash is constructed in the form of coins. Coins, generated by the double hush chain, have different denominations. The divisibility based on the double hash chain technique. Electronic cash is constructed in the form of coins. Coins, generated by the double hash chain, have different denominations. The divisibility of an electronic cash is satisfied by the payment certificate, which is a pair of bank´s proxy signature received from the bank. When a customer pays the coin of subdivision, the fairness of that coin is certified by a customer´s signing instead of a bank. Although the proposed method does not guarantee user´s anonymity, it generates coins which cannot be forged, and the customer can use an electronic cash conveniently and efficiently with its divisibility.

• Journal of Cadastre & Land InformatiX
• /
• v.53 no.1
• /
• pp.83-105
• /
• 2023

A robot-friendly building certification system was established in 2022 to accommodate the growing number of service robots introduced into buildings. However, this system primarily targeted office buildings, with limitations in applying other functional architectures. To address this problem, we developed a certification model of a robot-friendly environment to extend the existing system to apartment complexes. Using focus group interviews and the analytic hierarchy process, we established 28 evaluating items categorized as (a) architecture and facility design, (b) networks and systems, (c) building operations management, and (d) support for robot activity and other services. These indicators were weighted based on their relative importance within and between categories, resulting in scores ranging from 1 to 18 points and a total of 176 points. According to evaluations with the 28 items, each apartment complex could be graded as "best," "excellent," or "general" based on its total achieved scores. This study is significant, as we present the world's first certification model of a robot-friendly environment for apartment complexes that considers human-robot interactions

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.10
• /
• pp.31-38
• /
• 2008

This paper describes sensor network system implementation for the IEEE 1451.2 standard which guarantees compatibilities between various wired sensors. The proposed system consists of the Network Capable Application Processor(NCAP) in the IEEE 1451.0, the Transducer Independent Interface(TII) in the IEEE 1451.2, the Transducer Electronic Data Sheet(TEDS) and sensors. The research goal of this study is to minimize and optimize system complexity for IC design. The NCAP is implemented using C language in personal computer environment. TII is used in the parallel port between PC and an FPGA application board. Transducer is implemented using Verilog on the FPGA application board. We verified the proposed system architecture based on the standards.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.6
• /
• pp.594-599
• /
• 2012

The objective of this study was to determine the processing conditions for salt dried rockfish Sebastes schlegeli by sun drying and cold-air drying, as measured by alcohol dehydrogenase (ADH) and acetaldehyde dehydrogenase (ALDH) activity. We processed salt dried rockfish samples. The salinity of rockfish samples was within 1% following salting with 25% salt brine for 3 h. The moisture content of salt dried rockfish was found to reduce linearly from 70.12 to 39.5 g/100 g over the same time interval. The water activities of salt dried rockfish by sun and cold-air drying were 0.94 and 0.87, respectively, after three days of drying. Acid values (AV) were 10.71 and 5.96 mg KOH/g, respectively, after the three day drying period. The ADH activity in a water extract from salt dried rockfish following sun and cold-air drying for 24 h was 228.5% and 226.1% at 13.3 mg/mL, respectively, and was higher than that when drying lasted for 48 and 72 h. The ALDH activity was not affected but both ADH and ALDH activity tended to decrease as the drying time increased from 24 to 72 h. The conditions of processing for the best quality of salt dried rockfish were determined to be drying with a cold-air system for 24 h. These results indicated that water extracts from salt dried rockfish have valuable biological attributes owing to the metabolizing of alcohol and can provide useful information for the design of drying systems for salt dried rockfish.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.1
• /
• pp.9-18
• /
• 2018

Enhancing performance of big data analytics in distributed environment has been issued because most of the big data related applications such as machine learning techniques and streaming services generally utilize distributed computing frameworks. Thus, optimizing performance of those applications at Spark has been actively researched. Since optimizing performance of the applications at distributed environment is challenging because it not only needs optimizing the applications themselves but also requires tuning of the distributed system configuration parameters. Although prior researches made a huge effort to improve execution performance, most of them only focused on one of three performance optimization aspect: application design, system tuning, hardware utilization. Thus, they couldn't handle an orchestration of those aspects. In this paper, we deeply analyze and model the application processing procedure of the Spark. Through the analyzed results, we propose performance optimization schemes for each step of the procedure: inner stage and outer stage. We also propose appropriate partitioning mechanism by analyzing relationship between partitioning parallelism and performance of the applications. We applied those three performance optimization schemes to WordCount, Pagerank, and Kmeans which are basic big data analytics and found nearly 50% performance improvement when all of those schemes are applied.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.1
• /
• pp.34-41
• /
• 2002

In the conventional rake receiver structure for the IS-95 CDMA system, each finger has its own time-deskew buffer or FIFO that aligns the multipath signals to the same timing reference in order to combine symbols. This architecture is not a burden to the rake receiver design mainly because of the small number and size of the buffers. However, the number and size of the buffers are significantly increased in the cdma2000 system which adopts multiple carriers and the small spreading gain for a higher rate in data services. In order to decrease the number of buffers, we propose a new model of the time-deskew buffers, which combines the symbols as well as realigns them at the same time. Our architecture reduces the hardware complexity of the buffers by about more than 60% and 70% compared with the conventional one when we consider each rake receiver has three and four independent fingers, respectively. Moreover, the proposed algorithm is very useful not only to the cdma2000 rake receiver but also to the receiver with many fingers in order to increase the BER performance.

• Journal of KIISE:Software and Applications
• /
• v.31 no.2
• /
• pp.137-152
• /
• 2004

Assesment of 30 nutritional minerals and 8 toxic elements in hair are very important not only for determining adequacy, deficiencies and unbalance, but also for assessing their relative relationships in the body. A test has been developed that serves this purpose exceedingly well. This test is known as tissue mineral analysis(TMA). TMA is very popular method in hair mineral analysis for health care professionals in over 46 countries' medical center. However, there are some problems. First, they do not have database which is suitable for korean to do analyze. Second, as the TMA results from TEI-USA is composed of english documents and graphic files prohibited to open, its usability is very low. Third, some of them has low level database which is related to TMA, so hairs are sent to TEI-USA for analyzing and medical services. it bring about an severe outflow of dollars. Finally, TMA results are based on the database of american health and mineral standards, it is possibly mislead korean mineral standards. The purposes of this research is to develope the first Intelligent Medical Expert System(IMES) of TMA, in Korea, which makes clear the problems mentioned earlier IMES can analyze the tissue mineral data with multiple stage decision tree classifier. It is also constructed with multiple fuzzy rule base and hence analyze the complex data from Korean database by fuzzy inference methods. Pilot test of this systems are increased of business efficiency and business satisfaction 86% and 92% respectively.

• Korean Journal of Remote Sensing
• /
• v.14 no.4
• /
• pp.376-391
• /
• 1998

Images from satellites will have 1 to 3 meter ground resolution and will be very useful for analyzing current status of earth surface. An image processing system named GeoWatch with more intelligent image processing algorithms has been designed and implemented to support the detailed analysis of the land surface using high-resolution satellite imagery. The GeoWatch is a valuable tool for satellite image processing such as digitizing, geometric correction using ground control points, interactive enhancement, various transforms, arithmetic operations, calculating vegetation indices. It can be used for investigating various facts such as the change detection, land cover classification, capacity estimation of the industrial complex, urban information extraction, etc. using more intelligent analysis method with a variety of visual techniques. The strong points of this system are flexible algorithm-save-method for efficient handling of large size images (e.g. full scenes), automatic menu generation and powerful visual programming environment. Most of the existing image processing systems use general graphic user interfaces. In this paper we adopted visual program language for remotely sensed image processing for its powerful programmability and ease of use. This system is an integrated raster/vector analysis system and equipped with many useful functions such as vector overlay, flight simulation, 3D display, and object modeling techniques, etc. In addition to the modules for image and digital signal processing, the system provides many other utilities such as a toolbox and an interactive image editor. This paper also presents several cases of image analysis methods with AI (Artificial Intelligent) technique and design concept for visual programming environment.