• Journal of the Korea Institute of Building Construction
• /
• v.20 no.5
• /
• pp.449-457
• /
• 2020

Due to the improvement of living standards and avoidance of the 3D industry, it is difficult to find young and competent domestic workers at construction sites, and most foreign workers are contributing to the replacement, but the quality is still deteriorating due to lack of skilled workers and aging. Precast method is a method that make members in factory and assembles them on site, which can be expected to improve labor force and quality. This study is intended to provide basic data for the development of hang-type PC beams that can be applied to the determination of the field application of developed PC beams. The U-type connecting material is installed on both ends of the hang-up PC beam, and the role of the U-type connecting material is very important because it is a simple construction method through the U-type connecting material. In addition, the performance of the U-type connecting material will determine the performance of the hang-type PC beam as the final destruction occurs in the hang-type PC beam. The material properties of U-type connecting material were identified through structural experiments, and the end test corresponding to the partial experiment was conducted based on the material test results identified. Finally, the final design value of PC beams was proposed through structural experiments for application to the site.

• Advanced Composite Materials
• /
• v.17 no.1
• /
• pp.25-40
• /
• 2008

The research and development in soundproof materials for preventing noise have attracted great attention due to their social impact. Noise insulation materials are especially important in the field of soundproofing. Since the insulation ability of most materials follows a mass rule, the heavy weight materials like concrete, lead and steel board are mainly used in the current noise insulation materials. To overcome some weak points in these materials, fiber reinforced composite materials with lightweight and other high performance characteristics are now being used. In this paper, innovative insulation sheet materials with carbon and/or glass fabrics and nano-silica hybrid PU resin are developed. The parameters related to sound performance, such as materials and fabric texture in base fabric, hybrid method of resin, size of silica particle and so on, are investigated. At the same time, the wave analysis code (PZFlex) is used to simulate some of experimental results. As a result, it is found that both bundle density and fabric texture in the base fabrics play an important role on the soundproof performance. Compared with the effect of base fabrics, the transmission loss in sheet materials increased more than 10 dB even though the thickness of the sample was only about 0.7 mm. The results show different values of transmission loss factor when the diameters of silica particles in coating materials changed. It is understood that the effect of the soundproof performance is different due to the change of hybrid method and the size of silica particles. Fillers occupying appropriate positions and with optimum size may achieve a better effect in soundproof performance. The effect of the particle content on the soundproof performance is confirmed, but there is a limit for the addition of the fillers. The optimization of silica content for the improvement of the sound insulation effect is important. It is observed that nano-particles will have better effect on the high soundproof performance. The sound insulation effect has been understood through a comparison between the experimental and analytical results. It is confirmed that the time-domain finite wave analysis (PZFlex) is effective for the prediction and design of soundproof performance materials. Both experimental and analytical results indicate that the developed materials have advantages in lightweight, flexibility, other mechanical properties and excellent soundproof performance.

• Clinical and Experimental Reproductive Medicine
• /
• v.26 no.1
• /
• pp.75-81
• /
• 1999

The beneficial effect of glucose and phosphate ions in culture medium on the development of human embryos in vitro has not been fully elucidated. The purpose of this study was to evaluate the influence of fertilization and culture of embryos in glucose/phosphate-free m-TALP medium on pregnancy rates in IVF-ET program. The patients in 244 IVF-ET cycles received GnRH agonist + HMG regimens. A does of 10,000 IU HCG was administered when two or more dominent follicles reached 18mm in diameter. Thirty-six hours after HCG, oocytes were recovered transvaginally using ultrasound guidance. Aspirated oocytes were matured for 4 to 6 h in TCM-199 supplemented with 10% follicular fluid (FF). Insemination was carried out with 50,000 motile spermatozoa in TCM-199 + 10% FF or m-TALP + 5% FF + 5% fetal cord serum (FCS) according to experimental design. After 6 h, oocytes were washed 3 to 4 times and cultured in each fresh medium. After 20 h, oocytes were freed from cumulus/corona cells and examined for the presence of pronuclei. Fertilized oocytes were transferred into each co-culture drops and cultured for further incubation. On day 3, embryo transfer was performed with grade 1 and 2 embryos. Monolayers for co-culture of embryos were prepared by plating $1{\times}10^5$ cumulus cells/ml in 10ul drop of TCM-199 + 10% FF or m-TALP + 5% FF + 5% FCS media 24 h prior to the onset of co-culture. Development to 4 to 16 cell stage was observed at 70x magnification following two days of incubation. Pregnancy was confirmed by detecting increasing serum ${\beta}$-hCG concentrations for 11 days following embryo transfer. Data were analyzed by ${\chi}^2$-test. Oocytes from 244 IVF-ET cycles were randomized. The number of cycles and mean age of patients were 97 and 147, 31.3 yrs and 31.2 yrs for TCM-199 (control) and m-TALP groups, respectively. The mean number of retrieved oocytes/cycle, fertilization rates, number of embryos transferred/ET and pregnancy rates were 11.1 and 10.3, 65.1% and 67.3%, 4.1 and 4.7, 28.9% and 43.8% for TCM-199 and m-TALP groups, respectively. Differences in the pregnancy rates were found between control and m-TALP groups (p<0.05). The pregnancy rate of patients divided according to maternal age groups of ${\leq}30$, 31-35, $36{\leq}$ were 44.4% and 49.0%, 26.1% and 41.3%, 29.2% and 41.2% for control and m-TALP groups, respectively. These data indicate that culture of human embryos in glucose/phosphate-free m-TALP medium improves pregnancy rates.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.1
• /
• pp.13-22
• /
• 2001

This paper presents three dimensional structure of RF packages and the improvement effect of its electrical characteristics when implementing RF transceivers. We divided RF modules into several subunits following each subunit function based on the partitioning algorithm which suggests a method of three dimension stacking interconnection, PAA(pad area array) interconnection and stacking of three dimensional RF package structures. 224MHz ITS(Intelligent Transportation System) RF module subdivided into subunits of functional blocks of a receiver(RX), a transmitter(TX), a phase locked loop(PLL) and power(PWR) unit, simultaneously meeting the requirements of impedance characteristic and system stability. Each sub­functional unit has its own frequency region of 224MHz, 21.4MHz, and 450KHz~DC. The signal gain of receiver and transmitter unit showed 18.9㏈, 23.9㏈. PLL and PWR modules also provided stable phase locking, constant voltages which agree with design specifications and maximize their characteristics. The RF module of three dimension stacking structure showed $48cm^3$, 76.9％ reduction in volume and 4.8cm, 28.4％ in net length, 41.8$^{\circ}C$, 37% in maximum operating temperature, respectively. We have found that three dimensional PAA package structure is able to produce high speed, high density, low power characteristics and to improve its functional characteristics by subdividing RF modules according to the subunit function and the operating frequency, and the features of physical volume, electrical characteristics, and thermal conditions compared to two dimensional RF circuit modules.

• Journal of Digital Convergence
• /
• v.16 no.7
• /
• pp.107-116
• /
• 2018

One of the key mission is to develop and prompte the use National Competency Standards, which is defined to be the systemization of competencies(knowledge, skills and attitudes) required to perform duties at the workplace by the nation for each industrial sector and level. This provides the basis for the design of training and detailed specifications for workplace assessment. To promote the data-driven service improvement, the commercial product Splunk was introduced, and has grown to become an extremely useful platform because it enables the users to search, collect, and organize data in a far more comprehensive, far less labor-intensive way than traditional databases. Leveraging Splunk's built-in data visualization and analytical features, HRD Korea have built custom tools to gain new insight and operational intelligence that organizations have never had before. This paper analyzes the NCS homepage. Concretely, applying Splunk in creating visualizations, dashboards and performing various functional and statistical analysis and structure without Web development skills. We presented practical use and implications through case studies.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.5
• /
• pp.343-349
• /
• 2013

Crashworthy fuel cells have a great influence on improving the survivability of crews. Since 1960's, the US army has developed a detailed military specification, MIL-DTL-27422, defining the performance requirements for rotorcraft fuel cells. In the qualification tests required by MIL-DTL-27422, the crash impact test should be conducted to verify the crashworthiness of fuel cell. Success of the crash impact test means the improvement of survivability of crews by preventing post-crash fire. But, there is a big risk of failure due to huge external load in the crash impact test. Because the crash impact test itself takes a long-term preparation efforts together with costly fuel cell specimens, the failure of crash impact test can result in serious delay of a entire rotorcraft development. Thus, the numerical simulations of the crash impact test has been required at the early design stage to minimize the possibility of trial-and-error with full-scale fuel cells. Present study performs the numerical simulation using SPH(smoothed particle hydro-dynamic) method supported by a crash simulation software, LS-DYNA. Test condition of MIL-DTL-27422 is reflected on analysis and material data is acquired by specimen test of fuel cell material. As a result, the resulting equivalent stresses of fuel cell itself are calculated and vulnerable areas are also evaluated.

• Korean Journal of Occupational Health Nursing
• /
• v.14 no.1
• /
• pp.56-70
• /
• 2005

Objectives: The purpose of this study is to develop a linking model between industrial injury insurance organs and local organizations providing social welfare health services, for the activation of medical rehabilitation services for industrial injury patients. Method: Research design for this study was a multi-step research through literature review, field research, and group interviews with persons in charge, to compare local society-oriented medical rehabilitation programs. The term of researches Sep.1 ~ Nov. 30, 2004. Results: 1. Home nurses from Workers Accident Medical Corporation have been taken to be adequate to case managers, who link industrial accident insurance institutions to local society services for the activation of medical rehabilitation services for industrial injury patients. They have been chosen for case managers because they have richer understanding and experiences of objects of industrial accidents than any other specialists, and because they have proved to be able to provide direct home services as a specialist. We have established the center for case management affairs within the workers accident general hospital, organized the committee for case management with doctors in charge, doctors in rehabilitation, rehabilitation consultants, social welfare workers, physical therapists, and nurses, determined objects of case managements from those of long-term recuperation, and constructed a course of case management containing from case management plans to evaluation. 2. We have made files of community resources, and organized the council of industrial accident administration to have it in charge of the adjustment and linking of services in case management affairs. 3. Because there are inequality of community resources between areas, differences in experiences in and bases for linking, and disparity of core organizations with active linking in the system of linking between public and civil sectors, we have taken a system of linking between parallel organs to be the core. In our linking model, workers accident general hospital, hospitals designated for industrial injury, and rehabilitation hospitals are linked in parallel, inadequate long-term recuperation managers are trusted to an workers accident medical corporations through examination by the examination committee in Korea Labor Welfare Corporation, and are dealt with by the committee for case management. Of the hospitals designated for industrial accidents, those running a home caring center provide home caring services for the handicapped at home from industrial injury. 4. Workers Accident Medical Corporation take part in medical rehabilitation, and Korea Labor Welfare Corporation in vocational/social rehabilitation. Furthermore, in the model, the latter should construct a system for job opportunities through Internet portals and provide cyber vocational consultation and introduction. Conclusion: Improvement of systems is needed to apply the linking model to practical affairs. Because this model is centered for practical affairs, it should be put under the analysis of effects, and evaluation of its adequacy to practical application, and its effects and efficiency through experimental running in the 8 workers accident general hospital in Korea.

• Journal of The Korean Association For Science Education
• /
• v.37 no.4
• /
• pp.625-636
• /
• 2017

The purpose of this study is to compare the differences in the operation form of science academy, science high school, and ordinary high school. We tried to find what kinds of variables differ in operation form based on the perception of the beneficiaries. For this purpose, 288 beneficiaries were surveyed. The groups were divided into three groups according to the high school they graduated from and then the differences among the groups were compared. The results are as follows. First, as a result of comparing the operation form according to high school using the most similar system design, it was confirmed that there are differences in curriculum and teacher variables. Second, as the result of analyzing the perception of curriculum and teacher professionalism based on the education experience of the beneficiary, the satisfaction for science academy was higher, but the satisfaction for science in ordinary high school was lower. Third, the key variables showing the differences in the operation forms between science academy and science high school were the learning contents, learning process and learning environment. The results of this study are expected to be used as basic data for future improvement of gifted education curriculum.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2
• /
• pp.27-34
• /
• 2001

Utterance verification is used in variable vocabulary word recognition to reject the word that does not belong to in-vocabulary word or does not belong to correctly recognized word. Utterance verification is an important technology to design a user-friendly speech recognition system. We propose a new utterance verification algorithm for no-training utterance verification system based on the minimum verification error. First, using PBW (Phonetically Balanced Words) DB (445 words), we create no-training anti-phoneme models which include many PLUs(Phoneme Like Units), so anti-phoneme models have the minimum verification error. Then, for OOV (Out-Of-Vocabulary) rejection, the phoneme-based confidence measure which uses the likelihood between phoneme model (null hypothesis) and anti-phoneme model (alternative hypothesis) is normalized by null hypothesis, so the phoneme-based confidence measure tends to be more robust to OOV rejection. And, the word-based confidence measure which uses the phoneme-based confidence measure has been shown to provide improved detection of near-misses in speech recognition as well as better discrimination between in-vocabularys and OOVs. Using our proposed anti-model and confidence measure, we achieve significant performance improvement; CA (Correctly Accept for In-Vocabulary) is about 89％, and CR (Correctly Reject for OOV) is about 90％, improving about 15-21％ in ERR (Error Reduction Rate).

• Journal of Korea Water Resources Association
• /
• v.38 no.1
• /
• pp.1-9
• /
• 2005

The study shows the possible use of the index flood frequency curves for an estimation of flood quantiles at ungauged locations. Flood frequency analysis were made for the annual maximum flood data series at 9 available stations in the Han river basin. From the flood frquency curve at each station the mean annual flood of 2.33-year return period was determined and the ratios of the flood magnitude of various return period to the mean annual flood at each station were averaged throughout the Han river basin, resulting mean flood ratios of different return periods. A correlation analysis was made between the mean annual flood and physiographic parameters of the watersheds i.e, the watershed area and mean river channel slope, resulting an empirical multiple linear regression equation over the whole Han river basin. For unguaged watershed the flood of a specified return period could be estimated by multiplying the mead flood ratio corresponding the return period with the mean annual flood computed by the empirical formula developed in terms of the watershed area and river channel slope. To verify the applicability of the methodology developed in the present study the floods of various return periods determined for the watershed in the river channel improvement plan formulation by the Ministry of Construction and Transportation(MOCT) were compared with those estimated by the present method. The result proved a resonable agreement up to the watershed area of approximately 2,000k $m^2$. It is suggested that the practice of design flood estimation based on the rainfall-runoff analysis might have to be reevaluated because it involves too much uncertainties in the hydrologic data and rainfall-runoff model calibration.