• 제목/요약/키워드: Design fire

검색결과 1,646건 처리시간 0.027초

건축물의 적재가연물 특성에 관한 연구 -우체국 적재가연물의 연소성상 - (Characterization of Live Fire Load in Buildings - Heat Release Characteristics of Typical Live Fire Load in Post Office Building -)

  • 남동군;장곡견웅이;사공성호;정종진
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
    • /
    • pp.7-10
    • /
    • 2008
  • Heat release characteristics of live fire load are an important parameter for performance oriented fire safety design of a building. While investigations have been carried out on the fire load and its burning behavior in office, residential and commercial buildings and so on, little effort has been paid for the rational treatment of fire load in post office buildings in Japan. In this report, burning behavior of typical combustible objects in post office buildings are studied by measuring heat release rates of plastic palettes with and without postal envelopes or packages and special containers loading numbers of palettes. The test results suggest that dynamic heat release rate is highly dependent on the condition of palettes especially if they load appropriate amount of postal envelopes or not.

  • PDF

단일화재실험을 통한 화재성상예측 및 건축구조물의 화재안전 설계에 관한 연구 (A Study on the Fire Safety Design and Predicting Fire Behavior Using Compartment Fire Test)

  • 윤웅기;서동구;김동은;권영진
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2013년도 춘계 학술논문 발표대회
    • /
    • pp.107-108
    • /
    • 2013
  • In this study, combustibles investigation and fire growth rate experiment were performed for predicting initial fire behavior in buildings. Combustibles investigation was performed for residential buildings, which is most frequently affected by fire in Korea. Spatial characteristics and combustibles properties were separately investigated, and occupied area and layout characteristics of combustibles were identified to produce general layout models. Of the layout models, room was selected for fire test of a single compartment. From this test, fire propagation for each combustible was identified, which was delayed compared to the summed heat release rate of a single combustible.

  • PDF

An Analysis of Working Hours by Type of Sprinkler Head Used at Indoor Gymnasiums

  • Ahn, Jae-Cheon;Kong, Ha-Sung
    • International journal of advanced smart convergence
    • /
    • 제10권4호
    • /
    • pp.117-123
    • /
    • 2021
  • This study aims to analyze working hours of sprinkler heads when a fire occurs at an indoor gymnasium while sprinkler heads are installed in division of standard response type, special response type, and earlier response type. The fire scenario was designed under the assumption that the fire started from overheating of a heater in the indoor gymnasium has transferred on to a couch to spread. The analysis on the operation time of the standard response type sprinkler head, the special response type sprinkler head and the early response sprinkler head was conducted. The result showed that, in case of fire in a gymnasium, the time for opening of the heat sensor due to the heat from the fire varies by the type of the sprinkler head. When a special response type sprinkler is installed, it worked below the assessment standards. When an early response sprinkler head is installed, it worked appropriately according to assessment standards. Based on the results, we found that sprinkler heads will work properly when installed according to design relevant to laws and regulations. This means that there is a limit in installation of sprinkler heads based on the existing law-based design as for indoor gymnasiums. Again, we conclude that if sprinkler heads are installed based on design made through laws and regulations, more time will be needed for operation, making it highly likely to fail to stop a fire at an earlier point of time.

초고층아파트의 화재안전성에 관한 건축계획적 연구 (A Study on the Fire Safety Design of High-Rise Apartment Buildings)

  • 서동갑;장순익;이명호
    • 한국화재소방학회논문지
    • /
    • 제5권3호
    • /
    • pp.23-30
    • /
    • 1991
  • One of the most serious national problems is the shortage of houses, especially in great cities. Housing shortage resulted from an overpopulated city brought the high-rise apartment buildings. While these buildings provide city-dwellers with much more houses, they have the basic fire safety problem in proportion to their heights. In these respect, this study aims to present the basic data for the fire safety design of high-rise apartment buildings. In this study, national fire damage statistics of past eleven years were investigated and the problem of the fire safety design of high-rise apartment buildings was studied through the methods of questions, observations and records on the representative six high-rise apartment buildings in seoul.

  • PDF

건축물의 화재 시 피난안전성 평가 개선을 위한 시뮬레이션 분석 연구 (A Study on the Analysis of Simulation for Improvement Evacuation Safety Assessment of Building in Fire)

  • 김혜원;김윤성;이병흔;진승현;구인혁;권영진
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2020년도 가을 학술논문 발표대회
    • /
    • pp.107-108
    • /
    • 2020
  • There is a need to analyze various factors in evacuation safety assessment of building in fire. In the current performance based design, evacuation safety assessment in case of fire is being conducted through the simulation as FDS and Pathfinder. However, the location and size of the door, the location of evacuation in the event of a fire are not considered when design. Accordingly, it is difficult to determine the worst case scenario considering the actual fire. Therefore in this study, in this study, we will propose an appropriate evaluation plan through simulation considering the worst-case scenario that may occur in case of fire.

  • PDF

화재 시뮬레이션(FDS)을 이용한 대형공간의 제연 설계인자에 관한 연구 (A Study on the Smoke control Design parameter of Large Volume space by Fire Dynamic Simulation)

  • 최상곤
    • 한국산학기술학회논문지
    • /
    • 제19권11호
    • /
    • pp.237-243
    • /
    • 2018
  • 최근 소방설계에서 '성능위주설계'가 도입되면서 설계 단계에서부터 현장에서 화재에 의한 최소한의 피해를 목적으로 다양한 노력을 기울이고 있다. 그러나 성능위주의 설계를 위한 다양한 노력에도 불구하고 설계엔지니어들에게 제연설비의 화재안전기준에서 제시하는 법령기준이 각 설계인자의 최소 설정한계를 제시하는 가이드가 된다. 이러한 법령기준은 최소한의 기준을 제공하는 것이기 때문에 다양한 상황의 건물과 더 다양한 변수를 고려해야하는 설계 엔지니어들에게 세밀한 가이드를 제공할 수는 없기 때문에 복합적인 상황에서 어떤 인자가 화재 시 안전에 더 영향을 많이 미칠 것인지 미리 인지하고 상황에 따라 인자들을 상호 조절할 수 있는 설계정보가 필요하다 할 것이다. 본 논문에서는 대공간에서 거실급배기방식을 사용하고 제연경계에 의하여 구획이 되어 있는 경우, 배연량을 법정 배연량으로 고정한 상태에서 거실제연 설계에 가장 영향을 많이 미칠 것으로 판단되는 두 가지 인자인 제연경계의 높이와 급기량을 대상으로 미 NIST에서 제공하는 화재시뮬레이션(Fire Dynamic Simulation) 코드를 이용하여 설계인자들에 대한 합리적인 설계를 위한 정보를 제공하기 위한 연구를 수행하였다. 성능위주설계를 위해 초기설계에 제연경계의 높이를 최대한계로 설계한 후 시뮬레이션 등의 다양한 방법을 통한 합리적인 풍량 결정이 이루어져야 할 것으로 판단된다.

A60급 구획 적용 격벽 관통용 관의 열전달 특성 I: 관의 설계에 따른 과도 열해석 (Heat Transfer Characteristics of Bulkhead Penetration Piece for A60 Class Compartment I: Transient Thermal)

  • 박우창;송창용;나옥균
    • 한국해양공학회지
    • /
    • 제32권5호
    • /
    • pp.310-323
    • /
    • 2018
  • In order to protect lives and prevent large-scale injuries in the event of a fire on a ship or an offshore plant, most classification societies are strengthening their fire resistance designs of relevant cargo holds and accommodation compartments to keep flames from being transferred from a fire point to other compartments. Particularly in critical compartments, where flames should not propagate for a certain period of time, such as the A60 class division, both the airtightness and fire-resistant design of a piece passing through a bulkhead are subject to the Safety of Life at Sea Convention (SOLAS) issued by the International Maritime Organization (IMO). In order to verify the suitability of a fire-resistant design for such a penetrating piece, the fire test procedure prescribed by the Maritime Safety Committee (MSC) must be carried out. However, a numerical simulation should first be conducted to minimize the time and cost of the fire resistance test. In this study, transient thermal analyses based on the finite element method were applied to investigate the heat transfer characteristics of a bulkhead penetration piece for the A60 class compartment. In order to determine a rational bulkhead penetration piece design, the transient heat transfer characteristics according to the variation of design parameters such as the diameter, length, and material were reviewed. The verification of the design specification based on a numerical analysis of the transient heat transfer performed in this study will be discussed in the following research paper for the actual fire protection test of the A60 class bulkhead penetration piece.

Methodology for investigating the behavior of reinforced concrete structures subjected to post earthquake fire

  • Behnam, Behrouz;Ronagh, Hamid R.;Baji, Hassan
    • Advances in concrete construction
    • /
    • 제1권1호
    • /
    • pp.29-44
    • /
    • 2013
  • Post earthquake fire (PEF) can lead to the collapse of buildings that are partially damaged in a prior ground-motion that occurred immediately before the fire. The majority of standards and codes for the design of structures against earthquake ignore the possibility of PEF and thus buildings designed with those codes could be too weak when subjected to a fire after an earthquake. An investigation based on sequential analysis inspired by FEMA356 is performed here on the Life-Safety performance level of structures designed to the ACI 318-08 code after they are subjected to two different earthquake levels with PGA of 0.35 g and 0.25 g. This is followed by a four-hour fire analysis of the weakened structure, from which the time it takes for the weakened structure to collapse is calculated. As a benchmark, the fire analysis is also performed for undamaged structure and before occurrence of earthquake. The results show that the vulnerability of structures increases dramatically when a previously damaged structure is exposed to PEF. The results also show the damaging effects of post earthquake fire are exacerbated when initiated from second and third floor. Whilst the investigation is for a certain class of structures (regular building, intermediate reinforced structure, 3 stories), the results confirm the need for the incorporation of post earthquake fire in the process of analysis and design and provides some quantitative measures on the level of associated effects.

CFAST를 이용한 구획실 가스화재의 디자인 화재곡선 평가 (Evaluation of Design Fire Curves for Gas Fires in a Compartment Using CFAST)

  • 백빛나;오창보;황철홍
    • 한국화재소방학회논문지
    • /
    • 제32권4호
    • /
    • pp.7-16
    • /
    • 2018
  • 본 연구에서는 CFAST를 이용하여 구획실 가스연료 화재실험에 대한 디자인 화재곡선(Design fire curves, DF)의 예측성능을 평가하였다. 평가된 디자인 화재곡선은 이전의 연구에서 제안된 2-stage DF, Ingason이 제안한 Quadratic DF와 Exponential DF이며, 예측성능 평가를 위해 각 디자인 화재곡선을 CFAST의 입력조건으로 하여 시뮬레이션을 수행하였다. 시뮬레이션결과와 실험결과의 비교를 통해 구획실 내부의 공간평균온도와 $O_2$, $CO_2$ 농도에 대해 전반적으로 2-stage DF > Quadratic DF > Exponential DF 순으로 실험결과를 합리적으로 예측하는 것을 확인하였다. CFAST 시뮬레이션 결과를 통해서도 실험에서 보이는 구획실 내 개구부측과 내측에서의 온도와 $O_2$$CO_2$ 농도 차이를 예측할 수 없음을 명확히 확인하였다. 또한 CFAST는 구획실 가스연료 화재의 CO 농도와 하층부의 공간평균온도에 대한 예측에 한계가 있음을 확인하였다.

클린룸 자동화재탐지설비의 성능위주 방재설계 적용에 관한 고찰 (A Study on the appliance of performance based design to the automatic fire alarm system in clean room facility)

  • 김동성;황철승;이상곤;조원철;이태식
    • 한국방재학회:학술대회논문집
    • /
    • 한국방재학회 2007년도 정기총회 및 학술발표대회
    • /
    • pp.513-517
    • /
    • 2007
  • This study is to establish the appliance model for the automatic fire alarm system in clean room within the framework of the performance based design. Because of the environmental and dimensional characters of clean room, this space is exposed to fire and toxic damage, so it is very important to notify the occupants of these dangerous situations.

  • PDF