• Journal of Digital Convergence
• /
• v.14 no.7
• /
• pp.339-345
• /
• 2016

While a game market has been growing consistently world widely, a market of arcade or video game has been detained. In this stagnation, the latest one in 2015, "Super Mario Maker" of Mario series that's been running in good for 30 years, the notable sale and growth of which are extraordinary. As for a study in customizing, a literature of game customizing and studies that are foregone were mostly handling contents about a game character. In the survey that's done in this thesis about knowledge and needs in customizinge game users have, it was shown they want to customize sides of a rule and a character. I analyzed what the main factors are in this game which uses a main concept of customizing and the reason for high profits and popularity. As a result of the analysis, four features, possibility to customize a game rule, share data among users, collaboration in marketing with NFC figure characters, offering updates with sustained and new customizing features were found out. I am certain a game customizing will be helping to meet users and be used for various industries without limit of existing character.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.669-675
• /
• 2020

In this study, 3D analysis was compared in evaluating the track deformation of subway structures during adjacent excavation. For the 3D analysis model, the boundary conditions of the tunnel model and the application level of the ground water were analyzed as variables. As the result of the effects of track irregularity using the 3D model, the analysis model considering the site ground water level instead of the design values and changing the constraint of the boundary condition is more reasonable. In addition, the influence of track irregularity due to the boundary condition and load condition of the analytical model is more obvious in the factors directly affected by the longitudinal relative displacement of the rail, such as alignment, cross level and gauge irregularity. Therefore, the evaluation on track stability according to adjacent excavation work was appropriate to analysed the longitudinal deformation of the track by using 3D model that could be investigate the deformation of rail. In addition, the boundary condition and load condition(ground water level) of the numerical model was important for accurate analysis results.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.2
• /
• pp.143-166
• /
• 1999

The success of porcelain laminate veneer depends on the bond strength between tooth structure and ceramic restoration and the design of tooth preparation. In particular, incisal coverage and incisal finish line are the two most important factors in long-term fracture resistance. Although the majority of clinicians are practicing incisal coverage and there are various opinions on the geo-metrical ratio between the clinical crown length of the remaining tooth structure and the length of incisal extension in porcelain laminate veneer and the optimal incisal finish lines. scientific evidence still loaves much to be desired. The purpose of this study was to determine the effects of the amounts of incisal coverage and the types of incisal finish line on the stress distribution in maxillary anterior porcelain laminate veneers under two different loading conditions. Three-dimensional finite element models of a maxillary anterior porcelain veneer with differ-ent amounts of incisal coverage ; 0, 1, 2, and 3mm and different incisal finish lines feathered edge, incisal bevel, reverse bevel and lingual chamfer with various amounts of lingual extension were developed. 300N force was applied at the point 0.5mm cervical of the linguoincisal edge in two loading conditions ; A) 125 degrees, B) 132 degrees. Tensile and compressive stress in ceramic and shear stress in the resin cement layer were analyzed using three-dimensional finite element method. The results were as follows : 1. The types of incisal finish line had more influence on the stress distribution in porcelain laminate veneer than the amounts of incisal coverage. 2. In case of no incisal coverage, incisal beveled laminate exhibited more evenly distributed tensile stress than feathered edged laminate. And in case of incisal coverage, reverse beveled laminate and lingual chamfered laminate with 1mm lingual extension exhibited more evenly distributed tensile stress than lingual chamfered laminates with 2mm and 3mm lingual extension. 3. As long as the lingual chamfer goes, less tensile stress was found at the incisal edge, while much more tensile stress was found at the lingual margin area in proportion to the length of lingual extension. 4. Under 125 degree load, tensile stress in porcelain laminate veneer had increased compared with that under 132 degree load and the difference exhibited by the change of the amount of tooth support was larger. 5. The types of incisal finish line and the distance from the incisal finish line to the loading point had more influence on the shear stress distribution in the resin cement layer than the amounts of incisal coverage. In contrast loading condition had little influence.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.61-68
• /
• 2010

Purpose: This article attempted to determine the factors affecting the preload and screw loosening. Methods: Available clinical studies from 1981 to 2008 from the PUBMED that presented screw loosening data and review articles regarding screw joint stability were evaluated. Eleven studies dealing the biomechanical principles of the screw mechanics were reviewed. Moreover, the results of our data were included. Results: The frequency of screw loosening was consequently reduced due to the advancement in torque tightening with torque wrench, screw material, coating technique for reducing the frictional force, and thread design, etc. If preload in the screw falls below a critical level, joint stability may be compromised, and the screw joint may fail clinically. The types of fatigue failure of screw were divided to adhesive wear, plastic deformation, and screw fracture. Conclusion: An optimum preload is essential to the success of the implant-abutment complex. To maintain optimum preload, using a torque wrench and re-tightening at recall time were needed.

• Journal of Radiation Protection and Research
• /
• v.36 no.3
• /
• pp.140-147
• /
• 2011

Our purpose is to specify behavior and environmental factors aimed at reducing the exposed dosage caused by PET-CT and to develop radiation safety management guidelines adequate for domestic circumstances. We have used a multistep-multimethod as the methodological approach to design and to carry out the research both in quality and quantity, including an analysis on previous studies, professional consultations and a survey. The survey includes responses from 139 practitioners in charged of 109 PET-CTs installed throughout Korea(reported by the Korean Society of Nuclear Medicine, 2010). The research use 156 questions using Cronbach's ${\alpha}$ (alpha) coefficients which were: 0.818 for "the necessity of setting and installing the radiation protective environment"; 0.916 for "the necessity of radiation protection", "setting and installing the radiation protective environment"; and 0.885 for "radiation protection". The check list, derived from the radiation safety management guidelines focused on behavior and environment, was composed of 20 items for the radiation protective environment: including 5 items for the patient; 4 items for the guardian; 3 items for the radiologist; and 8 items applied to everyone involved; for a total of 26 items for the radiation protective behavior including: 12 items for the patient; 1 item for the guardian, 7 items for the radiologist; and 6 items applied to everyone involved. The specific check list is shown in(Table 5-6). Since our country has no safety management guidelines of its own to reduce the exposed dosage caused by PET-CTs, we believe the guidelines developed through this study means great deal to the field as it is not only appropriate for domestic circumstances, but also contains specific check lists for each target who may be exposed to radiation in regards to behavior and environment.

• Journal of the Korean Solar Energy Society
• /
• v.35 no.2
• /
• pp.73-83
• /
• 2015

When it comes to these buildings for business use, cooling load during summertime was reported to have great importance which, as a result, impressively increased interest in Solar Heat Gain Coefficient (SHGC). Such SHGC is considered to be lowered with the help of colors and functions of glass itself, internal shading devices, insulation films and others but basically, these external shading devices for initial blocking that would not allow solar heat to come in from outside the buildings are determined to be most effective. Of many different external shading devices, this thesis conducted an analysis on Exterior Venetian Blind. As for vertical shading devices, previous researches already calculated SHGC conveniently using concepts of sky-opening ratios. However in terms of the Venetian Blind, such correlation is not possibly applied. In light of that, in order to extract a valid correlation, this study first introduced a concept called shape factor, which would use the breadth and a space of a shade, before carrying out the analysis. As a consequence, the concept helped this study to find a very similar correlation. Results of the analysis are summarized as follows. (1) Regarding SHGC depending on the surface reflectance of a shade, an average of 2% error is observed and yet, the figure can always be ignored when it comes to a simple calculation. (2) As for SHGC of each bearing, this study noticed deviations of 4% or less and in the end, it is confirmed that extraction can be achieved with no more than one correlation formula. (3) When only the shape factor and nothing else is used for finding a correlation formula, the formula with a deviation of approximately 5% or less is what one would expect. (4) Since the study observed slight differences in bearings depending on ranges of the shape factors, it needed to extract a weighted value of each bearing, and learned that the smaller the shape factor, the wider the range of a weighted value. The study now suggests that a follow-up research to extract a simple calculation formula by dealing with all these various inclined angles of shade, solar radiation conditions of each region (the ratio of diffuse radiation to direct radiation and others) as well as seasonal features should be carried out.

• Geotechnical Engineering
• /
• v.5 no.1
• /
• pp.7-18
• /
• 1989

In pile load tests on end bearing piles, generally, it is not possible to continue loading to the ultimate load. Thus, the concept of yield load has been introduced for determining design loads Iron the pile load test records. The conventional rules to determine the yield load were not available for evaluation on pile load test records obtained in 6 fields nearby westers 8r Southern Coasts in Korea. A new rule 9.as presented to determine easily the yield load, based on investigations on the pile load test records. The yield load of piles is determined at the infiection point on semi-logarithmic coordinates (P-logS), in which load is plotted in normal scale and settlement is plotted in logarithmic scale. This method may not only save much costs and times but also present safe luorking circumstances for pile load tests in field. It was found that the yield load represented the elastic limit of the pile load-settlement behalf.iota. The ultimate load, which is given at 25.4mm settlement on pile head, was 1.5 times of the yield load. The allowable long-term and short-term load capacities were, respectively, 50% and 75% of the yield load. The safety factors to get the allowable pile capacity were obtained as 2.0~4.0 for the equations to predict the static pile capacity.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.8
• /
• pp.5-14
• /
• 2018

The grain size of clastic sedimentary rocks classifies the rock types and also causes of anisotropy of the rock. The anisotropy is one of the most important factors that dominates the strength and weathering behavior of rocks. The anisotropy of clastic sedimentary and igneous rocks in the Gyeongsang Basin including Yeongju, Daegu, and Busan were analyzed by magnetic susceptibility expressed by the degree of anisotropy and shape parameter. As the results of the study, the sandstone deposited under lacustrine environment unaffected by the external force shows 1.03 degree of anisotropy. The degrees of anisotropy of the rocks affected by faults and fault rocks show 1.06 and 1.14, respectively. The magnetic susceptibility of rocks is to decrease with the distance from the fault. A fresh mudstone and shale formed by fines show a similar magnitude of the degree of anisotropy to fault rock and correspond to oblate shape parameter due to their sedimentary structure. Due to these reasons, we need attention in design, construction, and maintenance of a structure constructed in mudstone and shale.

• Korea Journal of Hospital Management
• /
• v.8 no.2
• /
• pp.70-92
• /
• 2003

The main objective of this paper is to investigate the factors affecting organizational citizenship behavior of hospital employees, and based on the investigation, to suggest some implications for effective human resources management of hospitals. For this purpose, physical therapists were selected as the subject of the research. Using their individual characteristics, job characteristics, professionalism and group cohesiveness as the variables affecting organizational citizenship behavior, an empirical model was constructed and tested. A survey was conducted through structured and self-administered questionnaire for the physical therapists working at hospitals of Busan-Kyongnam area, and data from 240 therapists were utilized in the final analysis. Major results of the empirical analysis are as follows: First, perception on professionalism and the degree of organizational citizenship behavior were higher for male, older, relatively more-educated and higher-grade employees. It is necessary to develope some measures to educate and motivate the employees who are in lower state of professionalism and organizational citizenship behavior. Second, among the individual characteristics, need for growth was found to have significant, positive influence on professionalism and group cohesiveness, but no direct effect on organizational citizenship behavior. On the other hand, extroversion had direct, positive effect on organizational citizenship behavior, as well as on professionalism and group cohesiveness. This result suggests that personnel selection and personality education should be conducted carefully. Third, job characteristics appeared to have very large, positive effect on professionalism, but not directly on organizational citizenship behavior. Fourth, professionalism was found to have very large, positive influence on group cohesiveness and direct, positive effect on organizational citizenship behavior. This implies that enhancing professionalism of physical therapists can strengthen organizational citizenship behavior in hospitals, and hence top management should actively support the programs for job re-design, skill education and quality improvement to enhance professionalism of their employees. Fifth and last, as an intervening factor, group cohesiveness appeared to have the largest, direct, positive effect on organizational citizenship behavior. It is, therefore, important for top management to improve group cohesiveness by exploring ways toward greater harmony and solidarity among the members of physical therapy department.

• Research in Community and Public Health Nursing
• /
• v.6 no.2
• /
• pp.234-249
• /
• 1995

Essential hypertension, one of the leading primary cause of death in Korea, is a typical chronic disease requiring adequate and continuous management. Though these hypertensives need to maintain desirable health practice by themselves for their life time, many previous studies indicated that most of the essential hypertensives have no specific symptoms and thus, reluctant to follow appropriate medical regimens causing the condition further aggravated and complicated. Thus the comprehensive self-regulation program was conducted as a nursing intervention on the promotion self-care 'performance and improvement in physical parameters of hypertensives. For this purpose, a one group quasi -experimental research with pre and post test design was used. And the whole program was carried out from October, 1993 to February, 1994. Self-regulation program was consisted with group education on hypertension and self-care, self-regulation including the blood pressure self-monitoring and recording, recording of daily self-care activities, and encouraging and reinforcing self-efficacy through verbal persuation and enactive attainment. The subjects were asked to measure their own blood pressure by themselves twice per day and to record blood pressure and the daily self-care performance according to the instructions provided during the whole period of 9 weeks. The data was analyzed by experimental stages: the first week, the fifth week, and the ninth week since the experimental imput began. Data were analyzed by the SPSS PC+ program with paired t -test and F-test, and multiple correlation to determine the variables affecting the effect of program. The results were as follows : 1) Subjects in J company were significantly lower diastolic blood pressure than K company after the program (t=2.39, p=.024). Level of cholesterol was significant difference according to position(t=2.23, p=.034), family history (t=-2.66, p=.013), diagnosis duration, and career(t=2.88, p=.055). Perceived self-efficacy was more significantly increased among the group with family history(t=-3.00, p=.013). 2) Before the program, there were significant positive correlation among the variables: internal-LOC and self-efficacy(r=.3952, p=.015), external-LOC and barriers (r=.6515, p=.000), chance-LOC and Barriers(r=.4133, p=.012). However there were significant negative correlation between internal-LOC and barriers (r=-.3236, p=.041, external-LOC and self -efficacy(r=-.3517, p=.028), self-efficacy and barriers(r=-.6654, p=.000). 3) There were significant relationships between changes in self - care performance and self-efficacy at 5th week (r=.5313, p=.001) and changes in self-efficacy at 9th week(r=.4586, p=.005). 4) After the program, internal health locus of control and perceived benefits showed significant correlation(r=.5673, p=.001, but perceived barriers was negative correlation with perceived self-efficacy (t=-4242, p=.01). From the above results, it can be concluded that the self-regulation program is an effective nursing strategy through the change of variables to promote self-care performance of hypertensives and to increase the self-efficacy. Thus this program can be recommended in the management of the hypertensives in workplaces and community settings.