• Archives of design research
• /
• v.14 no.2
• /
• pp.253-266
• /
• 2001

In this study was groped a plan for an idea and method of design as the alternative of cure of cocial defect. Ailo, it was referred how an idea and method of design could be used for a cure of social defect and it was considered that an educational form that to actualize the idea and method of design is the basic structure of a cure or improvement of social defect. This educational form actualities exactly the 'media'which the idea and method of design pursue. In the end, an effect of media could probably make social change be practical.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.1
• /
• pp.37-45
• /
• 2002

A method of measuring the length of defects on the wall and restructuring the defect image is proposed based on the estimation algorithm of a camera orientation, which uses the declination angle of a laser slit beam. The estimation algorithm of the horizontally inclined angle of CCD camera adopts a 3-dimensional coordinate transformation of the image plane where both the laser beam and the original image of the defects exist. The estimation equation is obtained by using the information of the beam projected on the wall and the parameters of this equation are experimentally obtained. With this algorithm, the original image of the defect can be reconstructed as an image normal to the wall. From the result of a series of experiments, the measuring accuracy of the defect is measured within 0.5% error bound of real defect size under 30 degree of the horizontally inclined angle. The proposed algorithm provides the method of reconstructing the image taken at any arbitrary horizontally inclined angle as the image normal as the wall and thus, it enables the accurate measurement of the defect lengths by using a single camera and a laser slit beam.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.2
• /
• pp.61-67
• /
• 2001

The purpose of this thesis was to provide the basic data for landscape architecture of apartment constructions and to minimize the users´ and builder´ loss in terms of finance and landscape due to defects in planting. After a review of literature related to defects of planting work, the researcher investigated the defects in planting of landscape plants on the basis of data from the drawing and defect-repair construction of 50 civil apartment complexes in Daegu and Kyongbook are from 1994 to 1998. The defect-ratio was analysed in terms of the species, shapes, and sizes of trees. It provides matters for consideration in terms of the design of the landscape planting on the apartment unit. It also provided the future directions for landscape architecture in apartment constructions with regard to the selection of the planting trees, etc., given statistics on defect occurrence. The causes of defect of the landscape planting trees were not studied accurately in this study due to the board range of researched area, the differences of the planting ground environment, the management ability, and the parameters of judging planting defects. It is recommended that those areas should be researched in the future.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.2
• /
• pp.1-12
• /
• 2023

To make semiconductor chips, a number of complex semiconductor manufacturing processes are required. Semiconductor chips that have undergone complex processes are subjected to EDS(Electrical Die Sorting) tests to check product quality, and a wafer bin map reflecting the information about the normal and defective chips is created. Defective chips found in the wafer bin map form various patterns, which are called defective patterns, and the defective patterns are a very important clue in determining the cause of defects in the process and design of semiconductors. Therefore, it is desired to automatically and quickly detect defective patterns in the field, and various methods have been proposed to detect defective patterns. Existing methods have considered simple, complex, and new defect patterns, but they had the disadvantage of being unable to provide field engineers the evidence of classification results through deep learning. It is necessary to supplement this and provide detailed information on the size, location, and patterns of the defects. In this paper, we propose an anomaly detection framework that can be explained through FCDD(Fully Convolutional Data Description) trained only with normal data to provide field engineers with details such as detection results of abnormal defect patterns, defect size, and location of defect patterns on wafer bin map. The results are analyzed using open dataset, providing prominent results of the proposed anomaly detection framework.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.307-316
• /
• 2004

This study examined the cause of the wrinkle defect which is frequently encountered in wire rod rolling of low carbon steel$(C0.08\~0.13wt.\%)$. Even a small defect on the surface of rolled bars can easily develop into fatal cracks during cold heading process of low carbon steel, and it is therefore necessary to minimize inherent defects on the surface of hot rolled bars. Hot rolling process of low carbon steel was analyzed to identify the cause of the wrinkle defect in conjunction with FE analysis. The integrated analysis revealed that the wrinkle defect initiated in the first stage of rolling, and it was at the billet edge where severe deformation and drastic temperature drop were present. To elucidate the micro-mechanical mechanism of the wrinkle defect, hot compression tests were carried out at various temperatures and strain rates using Gleeble-3800. The surface profile of the each other compressed specimens was compared, and rough surface lines were observed at relatively low temperatures. Those surface defects can develop into wrinkles during multi-pass rolling. To control the wrinkle defect in rolling, it is necessary to design an adequate caliber which can minimize the loss of ductility, and thereby prevent flow localization. To use the result of this study fur other steels, the quantitative measure of the wrinkle defect and flow localization parameter should be proposed.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.4
• /
• pp.13-21
• /
• 2019

The purpose of this study is to suggest an Improvement Model of defect information management system. The improvement model adapts methods for the residents to input defect information correctly and share to defect information with construction company. The adapted research method is review for existing defect information management system and suggested for data flow diagram of improvement model. The results of this study are as follows: The basic design of the information input window of the defect information management system for connecting with big data was made. And 5 point scale was applied to evaluate the convenience, simplicity, accuracy, necessity, and usability of the improvement model. It is evaluated that the economic effect caused by using the improvement model is saved by about 151 million KRW compared to the existing method. The Improvement model is used utilize big data in correct defect management and decision making.

• Archives of Plastic Surgery
• /
• v.35 no.6
• /
• pp.692-697
• /
• 2008

Purpose: Gluteal perforator flap has evolved to one of the standard tools for coverage of pressure sore. We used this flap to cover the defect adjacent to the buttock. Methods: From September 2004 to August 2006, gluteal perforator flaps were performed in 3 patients with sore and 9 patients with tumor. We made the rule for free style design of the flap. First, the defect should be covered fully regardless of the shape or area. Second, the location of perforators was decided to maximize flap mobility. Third, the donor-site should be closed directly. Results: Successful reconstruction was fulfilled. In 2 cases, initial flap congestion was observed but medical leech was applied and it was resolved. Partial flap loss occurred in one case. Infection was observed in one case. But there were no major complications. Conclusion: Gluteal perforator flap is very good option for the reconstruction of the defects adjacent to the buttock.

• Archives of Plastic Surgery
• /
• v.48 no.3
• /
• pp.261-268
• /
• 2021

Background Various methods have been described to close large meningomyelocele defects, but no technique has been proven superior to others. This study presents cases of meningomyelocele defect closure with a keystone-design perforator island flap. Methods A retrospective study was performed on 14 patients with meningomyelocele defects closed using various types of keystone flaps. Results The median age of the patients at surgery was 10.5 days (range, 1-369 days) and the average defect size was 22.5 cm² (range, 7.1-55.0 cm²). The average operative time for defect closure was 89.6 minutes (range, 45-120 minutes). Type IV bilateral keystone flaps were used for four defects, type IV unilateral flaps for six defects, type IIA flaps for two defects, and type III flaps for two defects. Conclusions All the defects healed completely with no major complications. The keystone-design perforator island flap is a reliable, easy, and fast technique to close large meningomyelocele defects.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1803-1807
• /
• 2005

The pipe which it uses from the nuclear power plant or factory by a long period use and a corrosive action the inside defect occurs on the inside. abstract here. The ESPI method is in order to investigate the laser light in the measurement object it will be able to measure the wide territory whole in once, does not receive an effect in direction of defect not to be, has the strong point it will be able to measure a change of place arrowhead real-time defect. It measured a inside defect of pressure vessel by using Out of plane ESPI and In plane of ESPI. It compared a each method result.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.8
• /
• pp.1213-1219
• /
• 2001

In this paper, modeling of the multi-pass roll forming process with the finite element method and defect prediction in roll forming process are presented. In the roll forming process, there occurs the defect of scratch. It appears on tubes because of the friction between the strip and the roll, the unexpected sliding velocity and the contact pressure when fabricating the tubes. The surface of the product will be not uniform due to the defect. The scratch can be predicted with the simulation modeling of the finite element method, and can be avoided by modifying the design.