• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.622-622
• /
• 2013

Piezoelectric energy harvesting (PEH) device refers to a power device for acquiring mechanical energy from the environment surrounding us which would otherwise be wasted and for converting it into usable electrical energy. While much work has been done on developing ZnO nanogenerator (NG) with nanowire arrays, there are some issues of not only scaling up its output power but also optimizing structure for operating feasibly in various conditions. Efficiency of NG is highly dependent on fixed orientation. But in many cases, it is not easy to predict where the pressure and vibration may come from. Furthermore, the direction of the applied mechanical stress is usually non-stationary and can be random in various practical applications. Therefore an omnidirectional PEH is needed.In this work, we investigate an omnidirectional PEH device consisting ZnO nanowires. We deposited spiral patterned ZnO seed layer on Kapton film. We deposited thin Cr layer on the ZnO seed layer using DC-sputter to form a passivation layer to retard un-expected growth of ZnO nanowires. We grew ZnO nanowires along the spiral arms using hydrothermal method. ZnO nanowires have been selectively grown from the ZnO sidewall without Cr layer and have the average length of$5{\mu}m$ and the average diameter of 40nm. We reduced the defect in the as-grown ZnO nanowires by O2 plasma using asher and by thermal treatment using RTA. Consequently, each nanowire has different directions to each other. This isotropic design can lead to the omnidirectional power generation. The morphology of NG is characterized with FESEM. Maximum output power of the device is measured by using a picoammeter and a nanovoltmeter.

• Journal of Yeungnam Medical Science
• /
• v.11 no.2
• /
• pp.303-313
• /
• 1994

Since introduction of venous flap in 1980, many experimental studies and clinical applications of various kinds of venous flaps were reported. Venous flap has the following advantages: (1) nonbulky and goo-quality of flap (2) long & large vascular pedicle (3) easy & rapid elevation of flap (4) no sacrifice of major arteries (5) a single operarive field. But, we also have some disadvantages of difficult handling of the pliable veins and the uncertainty of flap survival. For the better result we had to design the size of the flap larger than that of defect and increase the number of draining vein to reduce the postoperative edema of the flap. We have treated the defects of soft tissue of the hand using free arterialized venous flap from the flexor aspect of the forearm & had an excellent results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6114-6118
• /
• 2013

This study examined the ultrasonic pulse reflection method(UPRM) for testing each ultrasonic pulse waveform model(UPWM) based on weld defects. The sharp crack of a clear signal was generated. The echo height of the defective probes changed according to the location. In a long crack in a circle around the defective probes, the Swivel scanning echo height when using the particle was reduced drastically. The peaks in the echo were thin because the needle was pointed. The porosity defects arising from a single echo was sharp and crisp, but a number of pores of the collective reflection overlapped and ajagged echo was observed. Slag, slag inclusions, cracks, and defects at the Swivel scan of each particle using the echo shape showed difference in the degree. Cracks were revealed as sudden changes in the echo height of the slag inclusions: increase ${\rightarrow}$ decrease ${\rightarrow}$ increase ${\rightarrow}$ decrease. In addition, the location of a number of defects in the dense pore geometry, such as a typical echo sundry, revealed the shape in the slag. Poor penetration of the defect echo, revealed the cracks to have a sharp-edged, crack-like shape with an echo.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.3
• /
• pp.151-162
• /
• 2016

This study developed the shape of low depth new shape high performance hybrid composite beam which is taken strengths and compensated the defect of composite beam and hybrid beam. Also, this study performed the monotonic test to evaluate the bending performance of Low depth shape by creating 12 bending specimens. Bending performance test result showed that capacity of the beam was increased stably. Also, it is possible to apply the existing evaluation equation(KBC 2009) of composite beam. Mechanical properties and structural performance of materials are considered when high-strength steel ($F_y=650MPa$) is applied to the bottom plate.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.5 s.37
• /
• pp.87-94
• /
• 2005

This paper describes the method of detecting the region of vehicle number plate in colored car image with number plate. Vehicle number plate region generally shows formula colors in accordance with type of car. According to this, we use the method to combine a color ingredient H of HSI color model and a color ingredient Q of YIQ color model. However, the defect which a total operation time takes much exists if it uses such method. Therefore, in this paper, the concurrent accomplishes a candidate area extraction operation as draw a color H and Q ingredient among steps of extracting a region of vehicle number Plate. After the above step, as a next step in combination with color H and Q we can accomplish an region extraction fast by comparing to candidate regions extracted from each steps not to do a comparison operation to all of image pixel information. We also show implementation results Processed at each steps and compare with extraction time according to image resolutions.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.4
• /
• pp.286-292
• /
• 2012

The lateral upper arm flap (LUAF) was initially described by in 1982 by Song et al. as a simple skin flap, addressing the availability of cutaneous nerves for anastomoses. Katsaros et al., reported the use of a lateral upper arm skin flap, but also considered using it as a composite graft. The LUAF for the oral and maxillofacial reconstruction has several advantages over other flaps, such as constant anatomy, good color match and texture, thin design and plasticity. There is no functional limitation in the donor arm, such as strength and extension, and donor defects can be closed primarily with a linear scar, even when a flap of up to 8 cm in width is taken. For a better understanding of LUAF as a routine reconstructive option in moderate defect of maxillofacial region, the constant anatomical findings must be learned and memorized by young doctors during the specialized training course for the Korean national board of oral and maxillofacial surgery. This article review the anatomical basis of LUAF with Korean language.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.142-145
• /
• 2015

Presentation is the form of communication to draw out audience's behaviors in a limited time. The importance of presentation is emphasized over time. So speaker uses various remote toola. Therefor, in this paper, the remote control system for presentation using mobile network was proposed. The existing remote control applications has error on network connection, and are difficult to use without description for use. This system was designed and implemented to compensate the defect of the existing system. The system we have will connect PC and smartphones through socket to communication with TCP, which is connection-oriented transport service. It is made for users to select the files from the list of sent files and operate the process of presentation.

• The KIPS Transactions:PartD
• /
• v.9D no.2
• /
• pp.313-322
• /
• 2002

Multimedia conference systems are classified into the tightly coupled conference and the loosely-coupled conference, the former is a peer-to-peer-conference or multi-point-conference based un the ITU-T H.323 standard, and the latter is the H.332 standard extended from the ITU-T H.323 standard. Loosely-coupled conference based on the H.332 standard is composed of small participants with the capacity of the send-receive mode and large participants with the capacity of the receive-only mode. In the H.332 conference, a subject and a media type of the multimedia conference is pre-announced for conquest of the difficulty of capability negotiation, and used SDP of IETF for that. Therefore, the H.332-conference can conquer a defect of the H.323 multimedia conference scalability. This paper analyzes H.332 standard for the loosely-coupled conference and describes an implementation of the H.332 multimedia conference systems.

• Journal of Internet Computing and Services
• /
• v.5 no.3
• /
• pp.11-23
• /
• 2004

It is easy to access to the infinity information and programs, but it gives rise to the side effect. There are many side effects(ex. Hacking, Cracking, expose the personal information, etc). Nowadays, the computer virus raise the serious problems. The making program called Vaccine is work out a count measure. The Anti-Virus programs install on the client side computer and upgrade by downloading on the server's signature, the latest date, the program bound both of them is shown, but these programs have the defect that they have no remote control and no signature update because user's unconcern, This paper reported the research of existing virus infecting technology and the development of Web based Anti-Virus Scanner using the remote control on the internet server. Through this paper, I want to set up the counter measure for new virus easily, and to make more fast the vaccine for virus.

• Journal of the Korea Convergence Society
• /
• v.9 no.10
• /
• pp.257-263
• /
• 2018

The purpose of this study is to develop an automatic inspection system for a part of the differential drive gear into the transmission. This technology will make using the microvision automatic test equipment and automatic test equipment microlaser. This is that the operator intends to make the defect rate 0 in the inspection stage of the product which has been carelessly processed. The equipment developed in this research project will be applied to many areas. Packaging companies, nut bolt processing company, precisely supplier for printing on top of the semiconductor, SMT, etc. The company wants to sell the vision inspection equipment for various applications. If the defective rate of 0 is achieved through this research project, it is also possible to secure a stable supply from the parent company, and to lay the foundations for exporting based on product reliability. When the automatic inspection system is applied to domestic automobile parts processing companies, the reliability of automobiles in Korea will be greatly increased.