• The Journal of the Korean dental association
• /
• v.54 no.7
• /
• pp.529-540
• /
• 2016

Objective: The objective of this study was to evaluate the osseointegration of narrow-diameter implant with trapezoid-shape and to evaluate the effect of coronal microthreads on trapezoid-shape narrow-diameter implant. Materials and Methods: The experimental narrow-diameter implants were classified into two groups according to absence or presence of coronal microthreads: trapezoid-shape narrow diameter implant (TN group) and trapezoid-shape narrow-diameter implant with microthreads (TNM group). They were installed alternately in bilateral mandible in three dogs. After 8 weeks, the animals were sacrificed. Resonance frequency analysis, removal torque test, and histometric analysis were performed. Results: Statistically higher implant stability quotient (ISQ) values were observed in TNM group than in TN group at the time of implant installation. However, significant ISQ values difference was not observed between groups at 8 weeks. Both groups showed significantly increased ISQ values at 8 weeks, compared to the time of implant installation. There was no significant difference between groups in removal torque test. Bone-implant contact ratio also showed no significant difference between groups in total and coronal part. Conclusion: Within the limitation of this study, it could be concluded that the trapezoid-shape design on narrow-diameter implant showed successful ossointegration, and the microthreads on coronal part did not result in significant bone-implant contact and biomechanical stability at 8 weeks.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.6
• /
• pp.805-810
• /
• 2002

Development of a small gas-turbine combustor for 100㎾ class APU(Auxiliary Power Unit) has been performed. This combustor is a reverse-annular type and has a tangential swiller in the liner head to improve the fuel/air mixing and flame stability. Three main and three pilot fuel injectors of the simplex pressure-swirl type are used. The performance target at the design condition includes a turbine inlet temperature of l170k, a combustion efficiency of 99%, a pattern factor of 30%, and an engine durability of 3000 hours. Under developing the combustor, we conducted the performance test of our first prototype(TS1) with some variants. As a result of the test, the performance targets of the combustor are satisfied except that the pattern factor is about 4% higher than the target value. Therefore, the second prototype(TS2) was redesigned and the performance test was conducted with the critical focus on the pattern factor and the exit mean temperature. We adopted TS2 four variants to check the improvement of the pattern factor. As a result, the pattern factors of several variants were satisfied with the performance target. Finally, the TS2A variant was chosen as a final combustor fur our APU model.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.311-320
• /
• 2003

The coefficient of consolidation of clay deposit is one of the most important properties in the design of ground improvement. The in-situ value of $c_h$ is generally estimated by pore pressure dissipation using piezocone. Many researchers have suggested theoretical formula for its estimation. This study attempts to find out the validity of the existing theoretical formula in Korea and to find out the characteristics of $c_h$ related to the mechanical properties of clay. Piezocone tests and laboratory tests were performed at the site of pilot project of ground improvement at Yangsan-Mulgeum, Gyeongnam. Comparison of the estimated values of $c_h$using piezocone tests results and those from laboratory consolidation tests are carried out. Results show that Torstensson(cylindrical cavity theory) and Teh & Houlsby solutions derive similar values of $c_h$. And $c_h$ from oedometer test shows values similar to the above two methods. The value from either of the above two methods[Torstensson(cylindrical) or Teh & Houlsby] is recommended to be used as $c_h$.

• Journal of The Korean Association For Science Education
• /
• v.17 no.3
• /
• pp.301-311
• /
• 1997

The purpose of this study is to construct a structural equation model and to analyze causal relationships among variables related to attitudes to science using structural equation modeling(SEM) with LISREL VII. The sample consisted of 483 10th grade boys from a general high school in Pusan, Korea. The questionnaires (ABC-attitude scale: affection, behavioral intention, cognition scale of attitude towards science) were developed by the researcher through a pilot study. And other instruments have modified previous ones. Five instruments were used in this study: GALT(group assessment of logical thinking), MTSlS(modified test of science inquiry skill), ABC-attitude scale, MSAS(modified scientific attitude scale), CSAT(common science achievement test). Structural equation modeling with LISREL VII($J\ddot{o}reskog$ & $S\ddot{o}rbom,$ 1993) was employed to estimate the causal inferences about hypothesized relationships among observed data sets. Three competing models consisted of five latent variable(scientific thinking ability, science inquiry skill, attitude towards science, scientific attitude, science achievement) - lP(inquiry preceding) model, AP(attitude preceding) model and AM(attitude mediating) model - were developed. Among these competing models, IP model satisfied the observed data sets. The causal relationships among "attitudes to science" and other latent variables were reliably identified. According to the results of the present study, science inquiry skill was the most significant variable that can predict science achievement. But scientific thinking ability has not directly influenced science achievement. This study suggests that inquiry based teaching-learning processes should be offered to students for improvement of science achievement. At the same time, it seems to be important to develop positive attitude towards science. Understanding of relationships among variables related to attitudes to science will be helpful to the development of science curriculum and to the design of science teaching and learning process. LISREL has been recognized as a useful approach in testing a SEM. However, in this study, LISREL approach was estimated as much more useful method for research design.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.9
• /
• pp.185-192
• /
• 2011

The purpose of this paper is to propose the design and implementation of a korean style internet-based test system on the basis of efficiency and stability for middle server. The current assessment system has some unstable elements with regard to transmission procedure, cost, system load and stability. This paper proposes a series of activities for the performance improvement of korean style internet-based test system which finally produced various excellent results in the administration of expense control, human resources, and special operational affairs. The proposed system's technological factors using middle server have been tested through a basic simulation pilot system. Actual development procedure starts from the analysis required by improving the shortcomings of existing internet-based test systems. A efficiency comparison with existing system and newly developed system was made in the area of number of operators, abnormal processing, system maintenances. Korean style internet-based test system using middle server has shown great efficiency increased to the maximum of 2 times about the effectiveness of processing for various parts. The korean style internet-based test system using middle server have been given good evaluations with regard to the convenience of their use and the management system for operators and supervisors.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.5
• /
• pp.111-129
• /
• 2007

The standard construction manual of the SDA(Separated Doughnut Auger) piling method was proposed so that the resisting capacity of the augered piles could work effectively. 405 dynamic pile load tests and 30 static pile load tests were performed for 265 test piles, which were installed by the SDA piling method in 33 sites in Korea. The results of the pile load tests showed that the end bearing capacity of the SDA augered piles depended on the property of various soil stratums and did not agree with ones estimated by the existing formula based on several standard design codes. On the basis of the pile load test results, four formulas were presented according to bearing stratums to estimate quantitatively the unit end bearing capacity of the SDA augered piles. The formulas for the unit end bearing capacity of piles on soils or weathered rocks were related to N-value given by SPT(Standard Penetration Test), while the unit end bearing capacity on bedrock was suggested to be more than 1500 $tf/m^2$. The presented formulas were compared with the existing formulas, which were presented by several standard design codes to design the augered piles. In order to use correctly the presented formulas, the quality of Standard Penetration Test should be controlled precisely. Also it is desirable to choose a pilot construction site, where both dynamic and static pile load tests are performed.

• Physical Therapy Rehabilitation Science
• /
• v.6 no.2
• /
• pp.59-64
• /
• 2017

Objective: Elderly people with dementia experience not only cognitive dysfunction but also motor function deficits, such as balance and gait impairments. Recently, transcutaneous electrical nerve stimulation (TENS) has been used to reduce pain as well as to control muscle spasm, spasticity and motor performance in various types of subjects. The purpose of this study determined the effect of a single trial TENS on balance and gait function in elderly people with dementia. Design: A randomized controlled trial. Methods: Twenty-two subjects with dementia were assigned to the TENS group (n=12) and ten subjects were assigned to the control group (n=10) randomly. Subjects were classified into two groups: the TENS group (n=12) and the placebo-TENS group (n=10). The TENS group had electrical stimulation applied on the calf muscle for 15 minutes, while the placebo-TENS group had not received real electrical stimulation. The timed up and go test (TUG) and functional reach test (FRT) were used to measure the balance function, and the 10 meters walk test (MWT) and 6MWT were used to assess gait ability. All tests were performed before and after intervention under a single-blinded condition. Results: After intervention, there were significant improvements in TUG, FRT, 10MWT, and 6MWT results in the TENS group (p<0.05), while the placebo-TENS group did not show significant changes in all outcome measurements. There were also differences in all tests between the two groups at post-measurements (p<0.05). Conclusions: This study demonstrated that a single trial TENS application on the calf may be used to improve balance and gait function in elderly people with dementia.

• Journal of Pharmacopuncture
• /
• v.8 no.2
• /
• pp.11-16
• /
• 2005

Objective : The aim of the study was to investigate the therapeutic effect of BVA in the treatment of patients with acute ankle sprain. Design : A prospective randomized double-blind study of BVA was conducted. Setting : The study was done in the Kyungwon University Seoul Hospital from August 1st, 2004 to June 15th, 2005. Patients : 30 patients diagnosed with acute ankle sprain, especially 2nd degree on the Ankle grade pain chart(AGPC) participated in the study, who were divided into two groups (A and B) randomly by a coordinator flipping a coin. Group A and B were relevant to control and BVA group respectively, of which a coordinator never informed any other participant involved. Eventually 13 of 17 in group A and 11 of 13 in Group B finished all the process of the clinical trial. Intervention : In both group A and B, The Procedure of acupuncture treatment was made similar by appearance that four acupoints such as 坵墟(GB40), 中封(LR4), 商丘(SP5), 解谿(ST41) of the injured side were selected and Normal saline aqua-acupuncture(control, as a placebo) or BVA was done and then acupuncture at 坵墟(GB40), 中封(LR4), 商丘(SP5), 解谿(ST41), 足三里(ST36), 陽陵泉(G34) of the affected side was given again. the needles were retained for 20 minutes under the infrared rays. The treatment was given daily for a week. Outcome Measures : Ankle-Hindfoot Scale (AHS) and Visual Analogue Scale(VAS) were followed by three treatments. Statistical Analysis : Analysis regarding variations in AHS and VAS is carried out by applying Mann-Whitney test and Wilcoxon signed rank test sign test with level of significance at 5%. Results : At the end of the treatment, there was significant statistical differences between the two groups in VAS and AHS as well, while at the 3rd day only a VAS showed statistical significance. In each group, both VAS and AHS showed statistical significance along with duration of treatment. Conclusions : BVA was thought to be effective alternatives for relieving symptoms of acute ankle sprain, although further study was needed on the large scale.

• Journal of Acupuncture Research
• /
• v.21 no.5
• /
• pp.137-147
• /
• 2004

Objective : The aim of the study was to compare the therapeutic effect of the superficial and in-depth insertion of acupuncture needles in the treatment of patients with ankle sprain. Design : A prospective randomized single-blind study of superficial and deep acupuncture was conducted. Setting : The study was conducted in the Kang-nam Oriental Hosp. of Dong-Guk University. Patients: The study comprised 14 patients with ankle sprain who were divided into two groups (A and B). Intervention : In group A, the needle was introduced in the skin at a depth of 2 mm, whereas in group B the needle was placed deeply into muscular tissue or the articular capsule at a depth more than 1.5 Cm The treatment was planned for a duration of 1 week, 3 times. Outcome Measures : The intensity of pain was evaluated with the Ankle grade pain chart(AGPC) before and after treatment and at the 1-week follow-up examination. The AGPC includes Swelling, Tenderness, Exudation, Bruise, Medial/Lateral. stability test, Anterior drawer test, Squeeze test, Bearing weight, Pressure Algometer, Walking state and VAS. Results : Although at the end of the treatment there was no evidence of significant statistical differences between the two different groups, Pain reduction(VAS) was greater in the group treated with deep acupuncture. A statistical difference existed between the two groups at the 1 week follow up, with a better result in the deeply stimulated group in VAS. Conclusion : Clinical results show that deep stimulation has a better analgesic effect when compared with superficial stimulation in pain reduction(VAS, Visual analogic scale).

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.1
• /
• pp.125-134
• /
• 2011

The research is a survey and analysis of female apparel preferences, and recognition of the KS sizing system for adult female garments. The practical surveys in this research are examined by total number of subjects, 200 women who are living in Seoul, South Korea. The homogeneity test using Chi-square statistics, and the analysis of frequencies and ratios of contingency tables were performed with the data which are classified by age, education level, income level and housing modalities. The findings in this study are as follows: 1. Women's preferences for purchasing female garments indicate significant differences between subjects, such as age, education level, income level and housing modalities. Moreover, the following five types of adult female garments were analyzed in this study: upper garment, lower garment, one-piece apparel, sportswear and sleepwear. The results of the preference study show an indirect understanding of the KSK 0051 classification system for subjects of the survey. Therefore the preference study can be used as a pilot study for the sizing recognition survey. 2. Women's recognition of the KSK 0051 sizing system for adult female adult garments do not indicate significant differences based on the characteristics of age, education level, income level and housing modalities. The low recognition of the KS sizing system is due to too many details and complex numbers of application for users. Therefore, the sizing system should be simplified and rearranged to be more effective and have more recognizable categories.