• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권5호
• /
• pp.466-474
• /
• 2016

The model tests results for the original lines of an 10000TEU container vessel show that the delivered power is higher and could not satisfy the requirement of energy saving effects and design targets. In this paper, the lines optimization of the 10,000 twin-skeg container vessel was carried out by parametric modeling and CFD simulations. At first, the CFD methods for twin-skeg hull form were validated by the comparison with the experimental results. Then more than one hundred parameters were adopted for the establishment of the fully parametric model. Based on the parametric model of the twin-skeg container vessel, the preliminary optimization was carried out by tight coupling of FRIENDSHIP-FRAMEWORK with potential flow of SHIPFLOW. Then several important parameters related to the after part of twin-skeg vessel were investigated by viscous flow computation. The final optimized variant PM11, which the total resistance was reduced by about 8.3% in model scale, is obtained within the constraints of general arrangement. And the model tests for variant PM11 was carried out in CSSRC, which shows that the resistance of optimized variant PM11 is decreased by about 8.6%.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.654-659
• /
• 2003

PVAP (Pressure Vessel Analysis Program V1.0) was developed by adopting the finite element analysis program ANSYS V6.0, and Microsoft Visual Basic V6.0 was also utilized for the interfacing and handling of input and output data during the analysis. PVAP offers the end user the ability to design and analyze vessels in strict accordance with ASME Section VIII, Division 2. More importantly, the user is not required to make any design decisions during the input of the vessel. PVAP consists of three analysis modules for the finite element analysis of the primary components of pressure vessel such as head, shell, nozzle, and skirt. In each module, finite element analysis can be performed automatically only if the end user gives the dimension of the vessel. Furthermore, the calculated results are compared and evaluated in accordance with the criteria given in ASME Boiler and Pressure Vessel Code, Section VIII, Division 2. In particular, heat transfer analysis and consecutive thermal stress analysis for the junction between skirt and head can be carried out automatically in the skirt-tohead module. Finally, report including the above results is created automatically in Microsoft Word format.

• 한국정밀공학회지
• /
• 제32권3호
• /
• pp.269-277
• /
• 2015

Compressed natural gas (CNG) composite vessels for vehicles have been generally made of 34CrMo4 for a inner liner part and E-glass/epoxy for a composite layer part. But, there is a problem of material loss of CNG composite vessels used in vehicles due to the design of excessive thickness of the liner. And, light weight of the CNG composite vessel is required for improving fuel efficiency. In this study, optimal design for CNG composite pressure vessel was performed by using basalt fiber, which is the environment-friendly material having a good mechanical strength. The optimal thickness of each part (inner liner and composite layer) was determined by theoretical analysis and FEA for satisfying structural safety and lightweight of the vessel. Also, for improving fatigue life, optimal autofrettage pressure was derived from FEA results.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.403-407
• /
• 2012

본 연구의 목적은 최적화 해석 기법을 이용하여 복합재 압력용기의 스커트 치수를 도출하는 것이다. 복합재 압력용기의 스커트 최적화 해석은 부분문제 근사법(sub-problem approximation method) 알고리즘을 사용하였으며, APDL(ANSYS Parametric Design Language)을 이용하여 해석의 모든 과정을 일괄처리(batch processing)하였다. 설계변수로는 압력용기 스커트 부위의 두께와 길이를 선정하였으며, 내압에 의해 발생하는 변위와 무게를 각각 목적함수로 하여 최적화 해석을 통해 최적의 스커트 치수를 도출하였다. 그 결과 복합재 압력용기의 스커트 무게를 최대 4.38% 절감할 수 있었다.

• 시스템엔지니어링학술지
• /
• 제13권1호
• /
• pp.15-23
• /
• 2017

This paper describes verification of APR1400 reactor vessel by applying the system engineering approach, in which the design re-engineering method is used to check the design parameters of APR1400 RV (reactor vessel). The RV is classified as safety class 1 and therefore must adhere strictly to the rules of ASME BPVC section III, subsection NB and seismic category I. This study explores designing the RV by following the ASME guidelines and making a comparative study with the current design. To meet this objective we apply system engineering methodologies to structure the process and allow for verification and validation of the major RV design parameters such as thickness of RV. The structural thicknesses of various part of RV are determined as well as reinforcements on the RV major nozzles. A 3D virtual reality model was created based on the design parameters using CATIA V5 and animation using Dassault Composer V2016. A comparison of re-engineered ARP1400 RV and standard APR1400 RV was done to show which design parameters were taken more conservative approach.

• 대한토목학회논문집
• /
• 제26권1A호
• /
• pp.11-19
• /
• 2006

본 연구에서는 현수교의 선박충돌해석을 위한 설계선박을 결정하기 위하여 선박충돌위험도해석을 수행한다. 선박충돌에 대한 설계선박을 결정하기 위하여 AASHTO 설계기준에서 제시한 3개의 선박충돌 설계방법 중 확률기반 해석방법인 Method II를 사용한다. 선박충돌 위험에 노출된 각각의 교각에 대해 선박충돌위험도 평가를 하여 교각의 충돌설계수평강도를 결정한다. 해석과정은 반복적인 것으로 교량부재의 충돌저항강도를 가정하고 연간파괴빈도를 계산하여 허용기준이 만족하도록 설계 변수를 수정한다. 허용기준은 예상연간파괴빈도에 근거한 가중치를 이용하여 교각에 할당한다. 해석결과에서 안전성과 경제성을 얻기 위해 이 할당방법을 주탑집중 할당방법과 비교한다. 비록 주탑집중 할당방법이 주탑에 비해 과대평가되는 교각의 설계수평강도를 적절히 수정할 경우 보다 경제적인 결과를 가져오지만, 가중치에 의한 할당방법이 설계인자의 특성을 정량적으로 고려하기 때문에 더 합리적인 것으로 보인다. 그리고 선박충돌위험도 평가로부터 얻어지는 충돌설계수평강도에 상응하는 각각의 교각에 대한 설계선박이 결정된다. 같은 교량에 대해서도 충돌설계수평강도가 수로 및 교량의 특성과 선박통행량에 따라 상당히 변화한다. 따라서 허용기준의 할당과 설계선박 선정에 대한 많은 연구가 요구된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.325-330
• /
• 2001

One of the principal components of the KSTAR (Korea Superconducting Tokamak Advanced Research) tokamak structure is the vacuum vessel, which acts as the high vacuum boundary for the plasma and also provides the structural support for internal components. Hyundai Heavy Industries Inc. has performed the engineering design of the vacuum vessel. Here the overall configuration of the KSTAR vacuum vessel was briefly described and then the design methodology and the analysis results were presented. The vacuum vessel consists of double walls, several ports, leaf spring style supports. Double walls are separated by reinforcing ribs and filled with baking/shielding water. The overall external dimensions of the main body are 3.39 m high, 1.11 m inner radius, 2.99 m outer radius, and made of SA240-316LN. The vacuum vessel was designed to be capable of achieving the base pressure of $1\times10^{-8}$ Torr, and also to be structurally capable of sustaining the vacuum pressure, the electromagnetic and thermal loads during plasma disruption and bakeout, respectively. The vacuum vessel will be baked out maximum $150^{\circ}C$ by hot pressurized water through the channels formed between double walls and the reinforcing ribs. A 3-D temperature distribution and the resulting thermal loads in the vessel were calculated during bakeout. It was found that the vacuum vessel and its supports were structurally rigid based on the thermal stress analysis. The maximum electromagnetic loads on the vacuum vessel induced by eddy and halo currents resulting from the engineering plasma radial and vertical disruption scenarios have been estimated. The stress analyses have been performed based on these electromagnetic loads and the resulting stresses at he critical locations of the vacuum vessel were within the allowable stresses.

• Journal of Mechanical Science and Technology
• /
• 제18권6호
• /
• pp.990-1001
• /
• 2004

The retention of a molten pool vessel cooled by internal vessel reflooding and/or external vessel reactor cavity flooding has been considered as one of severe accident management strategies. The present numerical study investigates the effect of both internal and external vessel mixed cooling on an internally heated molten pool. The molten pool is confined in a hemispherical vessel with reference to the thermal behavior of the vessel wall. In this study, our numerical model used a scaled-down reactor vessel of a KSNP (Korea Standard Nuclear Power) reactor design of 1000 MWe (a Pressurized Water Reactor with a large and dry containment). Well-known temperature-dependent boiling heat transfer curves are applied to the internal and external vessel cooling boundaries. Radiative heat transfer has been considered in the case of dry internal vessel boundary condition. Computational results show that the external cooling vessel boundary conditions have better effectiveness than internal vessel cooling in the retention of the melt pool vessel failure.

• 한국해양공학회지
• /
• 제26권3호
• /
• pp.20-25
• /
• 2012

In this paper, the authors propose a new approach to the control problem of marine vessels that are moored or controlled by actuators. The vessel control system is basically based on Dynamic Positioning System (DPS) technology. The main object of this paper is to obtain a more useful control design method for DPS. In this problem, the control allocation is a complication. For this problem, many results have been given and verified by other researchers using a two-step process, with the controller and control allocation design processes carried out individually. In this paper, the authors provide a more sophisticated design solution for this issue. The authors propose a new design method in which the controller design and control allocation problems are considered and solved simultaneously. In other words, the system stability, control performance, and allocation problem are unified by an LMI (linear matrix inequality) based on control theory. The usefulness of the proposed approach is verified by a simulation using a supply vessel model.

• 선박안전
• /
• 통권23호
• /
• pp.51-64
• /
• 2007

Main concern of this subject is "hat type of hull shape is most important for building aluminum fishing vessel and suitable for domestic fisherman." For the this subject, We research from traditional hull shape of fiberglass fishing vessel and supply to our domestic fisherman with 3D render images. Following the above job making with concept design and basic drawing for product model. And most important research job with technical of aluminum vessel and products system and standard of job description. We filled two category with design and products for our domestic fisherman.