Journal of Mechanical Science and Technology

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지

Computational Study of the Mixed Cooling Effects on the In-Vessel Retention of a Molten Pool in a Nuclear Reactor

  • Kim, Byung-Seok (School of Mechanical Engineering, Kyungpook National University) ;
  • Ahn, Kwang-Il (Integrated Safety Assessment, Korea Atomic Energy Research Institut) ;
  • Sohn, Chang-Hyun (School of Mechanical Engineering, Kyungpook National University)
  • Published : 2004.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

The retention of a molten pool vessel cooled by internal vessel reflooding and/or external vessel reactor cavity flooding has been considered as one of severe accident management strategies. The present numerical study investigates the effect of both internal and external vessel mixed cooling on an internally heated molten pool. The molten pool is confined in a hemispherical vessel with reference to the thermal behavior of the vessel wall. In this study, our numerical model used a scaled-down reactor vessel of a KSNP (Korea Standard Nuclear Power) reactor design of 1000 MWe (a Pressurized Water Reactor with a large and dry containment). Well-known temperature-dependent boiling heat transfer curves are applied to the internal and external vessel cooling boundaries. Radiative heat transfer has been considered in the case of dry internal vessel boundary condition. Computational results show that the external cooling vessel boundary conditions have better effectiveness than internal vessel cooling in the retention of the melt pool vessel failure.

Keywords

References

  1. Ahn, K. I., et al., 2000, 'Numerical Analysis of the Heat Transfer Characteristics of a Heat Generating Melt Pool Confined in a Hemispherical Cavity with the MELTPOOL Code,' 2nd Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS-2), Fukuoka, Japan, pp. 610-617
  2. Bejan, A., 1993, Heat Transfer, 2nd Ed., Wiley, New York
  3. Cheung, F. B. and Liu, Y. C., 1999, 'Effects of Thermal Insulation on External Cooling of Reactor Vessels under Severe Accident Conditions,' NURETH-9, CD-RPM publication, California, USA
  4. Choi, S. K., et al., 1993, 'The Choice of Cell Face Velocities in the Three Dimensional Incompressible Flow Calculations on Nonorthogonal Grids,' KSME International Journal, Vol. 6, pp. 154-161
  5. Chu, T. Y., et al., 1997, 'Ex-vessel Boiling Experiments : Laboratory and Reactor-Scale Testing of the Flooded Cavity Concept for In-vessel Retention, Part II : Reactor-scale boiling experiments of the flooded cavity concept for in-vessel core retention,' Nuclear Engineering and Design, Vol. 169, pp. 89-99 https://doi.org/10.1016/S0029-5493(96)01279-4
  6. Churchill, S. W. and Churchill, R. U., 1975, 'A Comprehensive Correlating Equation for Heat and Component Transfer by Free Convection,' Journal of AIChE, Vol. 21, pp. 604-606 https://doi.org/10.1002/aic.690210330
  7. Collier, J. G., 1981, Convective Boiling and Condensation, 2nd Ed., McGraw-Hill, New York
  8. Dhir, V. K., 1978, 'Study of Transitional Boiling Heat Fluxes from Spheres Subjected to Forced Vertical Flow,' Intl. Conf. on Heat Transfer, Toronto, Canada
  9. Epstein, M. and Fauske, H. K., 1989, 'The Three Mile Island Unit 2 Core Relocation-Heat Transfer and Mechanism,' Nuclear Technology, Vol. 87, pp. 1021-1035 https://doi.org/10.13182/NT89-A27694
  10. Ferziger, J. H. and Peric, M., 1996, Computational Methods for Fluid Dynamics, Springer-Verlag, Berlin, Germany
  11. Hayase, T., et al., 1992, 'A Consistently Formulated QUICK Scheme for Fast and Stable Convergence Using Finite-Volume Iterative Calculation Procedures,' J. Computational Physics, Vol. 98, pp. 108-118 https://doi.org/10.1016/0021-9991(92)90177-Z
  12. Kang, K. H., et al., 1998, 'Review on Experimental Studies for the In-Vessel Corium Retention Research,' KAERI/TR-1032/98
  13. Kang, K. H., et al., 2000, 'Experimental Investigations on the effects of Water Subcooling for the In-Vessel Debris Coolability In the LAVA Experiment,' NTHAS2 : 2nd. Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety, Fukuoka, Japan, pp. 596-603
  14. Khosla, P. K. and Rubin, S. G., 1974, 'A diagonally Dominant Second-Order Accurate Implicit Scheme, Computers Fluids,' Vol. 2, pp. 207-209 https://doi.org/10.1016/0045-7930(74)90014-0
  15. Kim, B. S., et al., 2000, 'A Computational Model for the Analysis of Heat Transfer Characteristics in Liquid Metal Layer under a Solidification Process : MELTPOOL,' Proceedings of 8th Intl. Conf. on Nuclear Engineering, ASME/JSME/SFEN, Baltimore, MD, USA
  16. Lee, S. C. and Bankoff, S. G. ,, 1998, 'A Comparison of Predictive Models for the Onset of Significant Void at Low Pressures in Forced-Convection Subcooled Boiling,' KSME International Journal, Vol. 12, pp. 504-513 https://doi.org/10.1007/BF02946366
  17. Nourgaliev, R. R., et al., 1997, 'Effect of Fluid Number on Heat Transfer Characteristics in Internally Heated Liquid Pools with Raleigh Numbers up to 1012,' Nuclear Engineering and Design, Vol. 169, pp. 165-184 https://doi.org/10.1016/S0029-5493(96)01282-4
  18. O'Brien, J. E. and Hawkes, G. L., 1991, 'Thermal Analysis of a Reactor Lower Head with Core Relocation and External Boiling Heat Transfer,' AIChE Symposium Series, Vol. 87
  19. Park, H. J. and Dhir, V. K., 1992, 'Effect of Outside Cooling on the Thermal Behavior of a Pressurized Water Reactor Vessel Lower Head,' Nuclear Technology, Vol. 100, pp. 331-346 https://doi.org/10.13182/NT92-A34729
  20. Rohsenow, W. M. and Choi, H., 1961, Heat, Mass and Momentum Transfer, Prentice-Hall, Englewood Cliffs, NJ
  21. Stone, H. L., 1968, 'Iterative Solution of Implicit Approximations of Multidimensional Partial Difference Equations,' SIAM J. Numer. Anal., Vol. 5, pp. 330-558 https://doi.org/10.1137/0705044
  22. Suh, K. Y. and Park, K. C., 1995, 'SONATA-IV : Simulation of Naturally Arrested Thermal Attack in Vessel,' Proc. Int. Conf. on PSA Methodology and Applications, Seoul, Korea, pp. 26-30
  23. Theofanous, T. G., et al., 1997, 'In-vessel Coolability and Retention of a Core Melt,' Nuclear Engineering and Design, Vol. 169, pp. 1-48 https://doi.org/10.1016/S0029-5493(97)00009-5
  24. Theofanous, T. G., et al., 1997, 'Special Issue on In-vessel Retention,' Nuclear Engineering and Design, Vol. 169, pp. 1-206 https://doi.org/10.1016/S0029-5493(97)00009-5
  25. Van Doormaal, J. P. and Raithby, G. D., 1984, 'Enhancements of the SIMPLE Method for Predicting Incompressible Fluid Flows,' Numerical Heat Transfer, Vol. 7, pp. 147-163 https://doi.org/10.1080/01495728408961817
  26. Voller, V. R. and Prakash, C., 1987, 'A Fixed Grid Numerical Modelling Methodology for Convection-Diffusion Mushy Region Phase-Change Problems,' Int. Journal of Heat and Mass Transfer, Vol. 30, pp. 1709-1719 https://doi.org/10.1016/0017-9310(87)90317-6
  27. Voller, V. R. and Swaminathan, C. R., 1991, 'General Source-Based Method for Solidification Phase Change,' Numerical Heat Transfer, Part B, Vol. 19, pp. 175-189 https://doi.org/10.1080/10407799108944962