• International Journal of Fluid Machinery and Systems
• /
• 제4권1호
• /
• pp.14-24
• /
• 2011

In this paper, design optimization for mixed-flow pump impellers and diffusers has been studied using a commercial computational fluid dynamics (CFD) code and DOE (design of experiments). We also discussed how to improve the performance of the mixed-flow pump by designing the impeller and diffuser. Geometric design variables were defined by the vane plane development, which indicates the blade-angle distributions and length of the impeller and diffusers. The vane plane development was controlled using the blade-angle in a fixed meridional shape. First, the design optimization of the defined impeller geometric variables was achieved, and then the flow characteristics were analyzed in the point of incidence angle at the diffuser leading edge for the optimized impeller. Next, design optimizations of the defined diffuser shape variables were performed. The importance of the geometric design variables was analyzed using $2^k$ factorial designs, and the design optimization of the geometric variables was determined using the response surface method (RSM). The objective functions were defined as the total head and the total efficiency at the design flow rate. Based on the comparison of CFD results between the optimized pump and base design models, the reason for the performance improvement was discussed.

• 대한인간공학회지
• /
• 제19권3호
• /
• pp.23-37
• /
• 2000

Usability is one of the most important factors that affect customers' decision to purchase a product. Several studies have been conducted to model the relationship between the product design variables and the product usability. Since there could be hundreds of design variables to be considered in the model, a variable screening method is required. Traditional variable screening methods are based on expert opinions (Expert screening) in most Kansei engineering studies. Suggested in this study are statistical methods for screening important design variables by using the principal component regression(PCR), cluster analysis, and partial least squares(PLS) method. Product variables with high effect (PCR screening and PLS screening) or representative variables (Cluster screening) can be used to model the usability. Proposed variable screening methods are used to model the usability for 36 audio/visual products. The three analysis methods (PCR, Cluster, and PLS) show better model performance than the Expert screening in terms of $R^2$, the number of variables in the model, and PRESS. It is expected that these methods can be used for screening the product design variables efficiently.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 봄 학술발표회 논문집
• /
• pp.195-202
• /
• 1995

In this study, the optimization program is developed to provide preliminary designs of steel-box girder bridges with minimum cost. The advantages of steel-box girder deck, when comparing with other girder types, are higher torsional rigidity and better resistance against corrosion. To achieve more rational design, systematic design procedure is required, by which the design constraints on steel-box girder are satisfied and the design variables with minimum cost are obtained. In the Proposed optmum design Process, the design variables are forced to be selected from the available discrete value set. The efficiency of the developed program has been verified by companing with previous designed sections and the resulting optimum cost with discrete variables has been compared with those of continuous variables.

• Structural Engineering and Mechanics
• /
• 제3권4호
• /
• pp.359-372
• /
• 1995

This study presents an efficient method for optimum design of plate and shell structures, when the design variables are continuous or discrete. Both sizing and shape design variables are considered. First the structural responses such as element forces are approximated in terms of some intermediate variables. By substituting these approximate relations into the original design problem, an explicit nonlinear approximate design task with high quality approximation is achieved. This problem with continuous variables, can be solved by means of numerical optimization techniques very efficiently, the results of which are then used for discrete variable optimization. Now, the approximate problem is converted into a sequence of second level approximation problems of separable form and each of which is solved by a dual strategy with discrete design variables. The approach is efficient in terms of the number of required structural analyses, as well as the overall computational cost of optimization. Examples are offered and compared with other methods to demonstrate the features of the proposed method.

• 한국안전학회지
• /
• 제27권5호
• /
• pp.148-157
• /
• 2012

Reliability-based design optimization (RBDO) problem is usually formulated as an optimization problem to minimize an objective function subjected to probabilistic constraint functions which may include deterministic design variables as well as random variables. The challenging task is that, because the probability models of the random variables are often assumed based on limited data, there exists a possibility of selecting inappropriate distribution models and/or model parameters for the random variables, which can often lead to disastrous consequences. In order to select the most appropriate distribution model from the limited observation data as well as model parameters, this study takes into account a set of possible candidate models for the random variables. The suitability of each model is then investigated by employing performance and risk functions. In this regard, this study enables structural design optimization and fitness assessment of the distribution models of the random variables at the same time. As the first paper of a two-part series, this paper describes a new design method considering probability model uncertainties. The robust performance of the proposed method is presented in Part 2. To demonstrate the effectiveness of the proposed method, an example of ten-bar truss structure is considered. The numerical results show that the proposed method can provide the optimal design variables while guaranteeing the most desirable distribution models for the random variables even in case the limited data are only available.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1248-1253
• /
• 2003

Sensitivity information has been used for linearization of nonlinear functions in optimization. Basically, sensitivity is a derivative of a function with respect to a design variable. Design sensitivity is repeatedly calculated in optimization. Since sensitivity calculation is extremely expensive, there are studies to directly use the sensitivity in the design process. When a small design change is required, an engineer makes design changes by considering the sensitivity information. Generally, the current process is performed one-by-one for design variables. Methods to exploit the sensitivity information are developed. When a designer wants to change multiple variables with some relationship, the directional derivative can be utilized. In this case, the first derivative can be calculated. Only small design changes can be made from the first derivatives. Orthogonal arrays can be used for moderate changes of multiple variables. Analysis of Variance is carried out to find out the regional influence of variables. A flow is developed for efficient use of the methods. The sensitivity information is calculated by finite difference method. Various examples are solved to evaluate the proposed algorithm.

• 대한토목학회논문집
• /
• 제9권1호
• /
• pp.33-40
• /
• 1989

철근 콘크리트 뼈대구조는 설계변수가 많고, 목적함수의 제약조건이 복잡하여 주로 반복적인 재해석에 의하여 최적해에 접근하는 방법이 사용되고 있다. 본 연구에서는 다단계분할(multilevel decomposition)에 의하여 최적화 문제를 형성하여 재해석과정을 줄이고 효과적으로 설계변수를 취할 수 있도록 하였다. 최적화의 단계는 첫째 단계에서 비선형거동에 의한 재분배모멘트의 설계공간을 계산하여 설계모멘트에 대한 제약조건식을 형성하고, 둘째 단계에서는 재분배 모멘트를 최적화하였으며, 셋째 단계에서는 설계단면을 최적화하였다. 이때 재분배 모멘트의 최적화에 따른 첫째 단계의 모멘트의 설계공간의 변화는 부재력 변화량 추정(force approximation technique)에 의하여 수정하도록 하며, 변수를 단계별로 줄여 수렴을 가속화시킬 수 있도록 하였다. 최적화 문제의 목적함수로는 경비함수를 취하였으며 영국 CP110의 한계상태설계법을 이용하여 부재의 응력제약조건식을 유도하고, 설계예를 통하여 본 연구의 타당성과 효율성을 구명하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.380-385
• /
• 2001

The paper presents a new multidisciplinary design optimization architecture using optimal sensitivity and coordination of interdisciplinary design variables. Original design problem is decomposed into a number of sub-problems that represent individual engineering analysis. The coupled effects between sub-problems are computed by interdisciplinary design variables. System level coordination is determined by optimal parameter sensitivity calculated by finite difference method. The proposed. MDO strategy is applied to a simplified model of rotorcraft blade design associated with structures and aerodynamic disciplines.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.894-899
• /
• 2000

Optimization of 26 design variables selected from suspension characteristics for Korean High Speed Train (KHST) is performed according to the minimization of 58 responses which represent running safety and ride comfort for KHST and analyzed by using the each response surface model from stochastic design experiments. Sensitivity of design variables is also analyzed through the response surface model which ineffective design prameters to the performance index are screened by using stepwise regression method. The response surface models are used for optimizing design variables through simplex algorism. Values of performance index simulated by optimized design parameters are totally lower than those by initial design parameters. It shows that this method is effective for optimizing multi-design variables to multi-object function.

• 한국실내디자인학회논문집
• /
• 제15권3호
• /
• pp.173-183
• /
• 2006

Design is inseparably related to aesthetics. In spite of that, it is difficult to explain the precise aesthetic variables that affect the aesthetic value of space or environment. Therefore, this study intended to find the relationships between aesthetic variables by perceptual and affective judgement for space design with focus on complexity and preference variables. The research found low level of 'arousing' as well as high levels of affective dimension variables 'pleasant' and 'relaxing' evoked high preference. High preference also appeared in space design cases with high unity, order, and clarity with low contrast and complexity, which are variables of perceptual dimension. Complexity, one variables of preference by Kaplan, is in an inverse proportion to space preference. Thus, space design with high complexity has high level of 'exciting' and 'arousing' affective responses and relatively low level of 'relaxing' response. Additionally, it was confirmed that the most importantly influential factor on complexity was diverse components rather than visual richness and ornamentation.