• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.353-360
• /
• 2016

Series hybrid electric vehicles (SHEVs) having multiple power sources such as an engine- generator (EnGen), a battery, and an ultra-capacitor require a power control unit with high power density and reliable control operation. However, manufacturing using separate individual power converters has the disadvantage of low power density and requires a large number of power and signal cable wires. It is also difficult to implement the optimal power distribution and fault management algorithm because of the communication delay between the units. In order to address these concerns, this approach presents a design methodology and a power control algorithm of an integrated power converter for the SHEVs powered by multiple power sources. In this work, the design methodology of the integrated power control unit (IPCU) is firstly elaborately described, and then efficient and reliable power distribution algorithms are proposed. The design works are verified with product-level and vehicle-level performance experiments on a 10-ton SHEV.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.199-202
• /
• 2000

In this paper, we developed an expert system that helped a machine-tool designer to select a moderate servomotor of the feed drive unit of a machine tool. With the specification of the drive unit, it searches for the set of servo-motors that have enough torque and power to satisfy the driving condition which the designer defines from the database. me database also contains knowledge and rules, which describe the design process and calculate design parameters of a feed drive. The knowledge-based design support module shows every steps of inference and reason for the solution that it provides.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.276-279
• /
• 2005

The proposed Novel OverDriving Technology with Optimum Look-up-Table（LUT）is suggested to be a better solution to reducing the occurrence of overshooting caused by the traditional overdriving method implemented to normally liquid crystal (VA mode). Chunghwa Picture Tubes, LTD. (CPT) has successfully implement this tech into 20 inch TFTLCD TV module at the present day. The proposed technology can speed up gray-to-gray response time of LCD less than one half of frame time. On the side, Optimum LUT construction apply the compression scheme to record total actual grayscale transfer characteristics instead of applying the normal spread method such as linear / non-linear interpolation. The memory space is been reduced and the distortion of the image quality is lesser.

• Journal of the Korean housing association
• /
• v.18 no.4
• /
• pp.27-35
• /
• 2007

The use of light steel framing as a method of house construction has increased significantly throughout Japan, United States and Europe. Industrialized unit method are prevailing in developed countries. Unit modular house industry has supported an intensive technical development, and housing systems are now available, which are highly adaptable in form and use. Unit modular house have their own merits and demerits, but the more crucial aspect is that the constant design standard should be applied in each design procedure. It entails the necessity of industrial housing development on the open system basis. This paper describes the general forms of factory product system of unit modular housing system in Korea, United States, Japan. And this study attempts to propose the unit factory product system of which the rate of pre-fabrication is the biggest, that can cope with the demand of user on the basis of open-system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1361-1375
• /
• 2013

The design flow considering nonstationarity is estimated to determine the design flood related to hydraulic structure quantitatively based on the design process for stream restoration in the Mokgamcheon watershed proposed by Lee et al. (2011). The purpose of this research is to suggest new ways that the design flood was calculated considering nonstationarity at the Mokgamcheon watershed. Storm-unit hydrograph method to calculate design flood and direct frequency analysis were applied and nonstationarity was considered for the frequency analysis through extRemes toolkit developed at NCAR (National Center for Atmospheric Research). Although the method of direct flood frequency analysis due to dealing with flowrates directly has a more reliable than strom-unit hydrograph method, as a result, the method of direct flood frequency analysis underestimated the design flood than strom-unit hydrograph method due to the characteristics of the flow data. Therefore, the flood of storm-unit hydrograph method (100 years frequency) was determined as the design flood in the Mokgamcheon watershed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.483-484
• /
• 2010

Unit cabin means room, which is installed in the high value ship such as drill ship and FPSO, after pre-assembled. In order to develop the noise control design for a unit cabin, a variety of acoustic tests such as sound absorption, transmission, and radiated noise measurements were carried out by using the mock-up of living quarter. From the tests, it was found out that the combined noise level of a unit cabin could be dominated by the radiated noise from wall panel in low frequency range and the design guidelines for the noise control of unit cabin were fully established, such as the improvement of sound transmission loss between the cabin and corridor, and radiated cabin noise reduction.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.3
• /
• pp.350-356
• /
• 2011

In this paper, we proposed the automatic cutting mechanism of the perforation pipes in an automobile muffler. This cutting mechanism makes continuous work possible, because it performs the batch work via the sequential operation of loading, feeding, cutting, and discharging. The proposed cutting mechanism consists of the frame unit, escape unit, turning unit, feeding unit, vision system, clamping unit, spindle/cutting unit and cooling unit. And, these mechanisms have been modularized through mechanical, dynamical and structural optimized design using the SMO (SimDesigner Motion) analysis module. Also, the virtual prototype was carried out using the 3-D CAD program. The cutting process cycle is performed in the order of loading, vision processing, feeding, clamping, cutting and discharging. And the cycle time for cutting one piece was designed to be completed in four seconds.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.13-16
• /
• 2008

Solid oxide fuel cell(SOFC) is an electrochemical energy conversion system with high efficiency and low-emission of pollution. In order to reduce the operating temperature of SOFC system under $800^{\circ}C$, the thickness reduction of YSZ electrolyte to be as thin as possible, e.g., less than 10 ${\mu}m$ are considered with the microstructure control and optimum design of unit cell. Methods for reducing the thickness of YSZ electrolyte have been investigated in coin cell. Moreover, a large unit cell($8cm{\times}8cm$) for SOFC was fabricated using an anode-supported electrolyte assembly with a thinner electrolyte layer, which was prepared by a tape casting method with a co-sintering technique. we studied the design factors such as active layer, electrolyte thickness, cathode composition, etc,. by the coin type of unit cell ahead of the fabrication process of a large unit cell and also reviewed about the evaluation technique of a large size unit cell such as interconnect design, sealing materials and current collector and so forth. Electrochemical evaluations of the unit cells, including measurements such as power density and impedance, were performed and analyzed. Maximum power density and polarization impedance of coin cell were 0.34W/$cm^2$ and $0.45{\Omega}cm^2$ at $800^{\circ}C$, respectively. However, Maxium power density of a large unit cell($5cm{\times}5cm$) decreased to 0.21W/$cm^2$ at $800^{\circ}C$ due to the increase of ohmic resistance. However, It was found that the potential value of a large unit cell loaded by 0.22A/$cm^2$ showed 0.76V at 100hrs without the degradation of unit cell.

• Journal of the Korean housing association
• /
• v.18 no.5
• /
• pp.11-22
• /
• 2007

The purpose of this study is to propose prototypical plans for a dwelling unit applying the concepts of 'open housing' and 'aging in place' for senior citizens living in cities focusing on specific life patterns with chronic disease. Especially, a unit was designed for diabetes patients because diabetes, a representative disease of elderly people, often accompanies complications such as arthritis and Alzheimer disease. A unit design suitable for the convenient life of the elderly people with diabetes will provide a guideline for the similar unit designs of the senior citizens with other diseases. In this study, three types of unit plan are proposed. A-type plan is for type-1 diabetes patients, B-type alt.1 for the independent seniors of type-2 diabetes patients, and B-type alt.2 for the dependant seniors of type-2 diabetes patients. And a support design for a unit plan with the exclusive area of $60\;m^2$ is proposed. The same support design is used for all three unit types. Although the locations of bathroom and storage room are fixed and the location of the kitchen is changeable only in wet-zone. In conclusion, senior residents with diabetes can choose one of three unit types before occupation and the chosen unit type can be renovated by replacing infill systems as the health condition or life style changes.

• Journal of The Korean Association of Information Education
• /
• v.19 no.4
• /
• pp.409-418
• /
• 2015

The purpose of this study is derived implications at software curriculum development utilizing the backward design model. In this study, we developed 'Algorithms and Programming' unit teaching plan based on backward design template. First, we have derived enduring understandings, essential questions, specific knowledge and skill on 'Algorithms and Programming' unit by considering the goal, content, achievement standard of Software education operating instructions. Second, we developed authentic tasks using GRASPS technic and holistic scoring rubrics. Third, we developed 7 lesson 14 WHERETO element for effective teaching in 'Algorithms and Programming' unit. Fourth, we investigated about the effectiveness of the development unit based on backward design. Backward design could be useful of developing curriculum unit and lesson plan at software education.