• Journal of Power Electronics
• /
• 제8권2호
• /
• pp.121-130
• /
• 2008

This paper introduces a design and implementation of a digital control unit for an Oxygenaire Servo Baby Incubator. The control unit is designed and implemented according to international standards. The control unit is based on an AVR Atmel microcontroller unit. It is built for monitoring and control and displays the three main temperature values: set point temperature, baby skin temperature and air temperature. User friendly software is implemented. The implemented control unit was tested in the laboratory as well as in the field. The control unit is sensitive to change of $0.1^{\circ}C$. At startup, based on a unique control strategy, the incubator reaches its steady state in about 14 minutes. The system schematic diagrams are shown in the paper. Also, programs flow charts are presented. The control unit was designed and implemented based on a contract between the Electronics Research Institute (ERI) and ENGIMED Company. The authors would like to thank ERI and ENGIMED for introducing all required finance and shoring to complete this work.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.225-228
• /
• 2000

In this paper, we present the design of AAL2/AAL5 Type conversion Unit using among BSC, BTS, Core-Network in IMT-2000 system. We first briefly introduce the B-ISDN ATM Adaptation layer specification of Type 2 AAL and Type 5 AAL, and describe conversion flow and each module. And then this paper has designed AAL2/AAL5 Type Conversion Unit and simulated it.

• ETRI Journal
• /
• 제28권4호
• /
• pp.506-508
• /
• 2006

A frequency selective surface (FSS), whose unit cell consists of a ternary tree loop loaded with a modified tripole, is proposed to block multiple frequency bands. Target frequency bands correspond to Korean personal communication services, cellular mobile communication, and 2.4 GHz industrial, scientific, and medical bands. Through the adjustment of inter-element and inter-unit cell gaps, and adjustment of the length of elements, we present an FSS design method that makes the precise tuning of multiple resonance frequencies possible. Additionally, to verify the validity of our approach, simulation results obtained from a commercial software tool and experimental data are also presented.

• 한국산학기술학회논문지
• /
• 제13권3호
• /
• pp.1370-1376
• /
• 2012

본 연구에서는 지구단위 내 교통부문에서 다양한 도시설계 및 교통정책의 적용에 따른 $CO_2$의 배출량 효과를 분석해보고자 하였다. 이를 위해 가상네트워크(Toy Network)를 설정하고 토지이용패턴과 교통정책을 접목한 19개의 시나리오를 가정한 후 교통수요 예측 프로그램인 EMME3를 이용하여 $CO_2$ 발생량을 산정하고 비교하였다. 그 결과 총 $CO_2$ 배출량이 가장 많이 감소한 정책은 지구의 중간부를 개발하면서 동시에 내부의 2차로 도로는 차량 통행을 금지시키고 보행자 천국을 만드는 것이었다. 총 $CO_2$량이 가장 많이 발생된 그룹은 교통공학에서 일반적으로 인식되어 왔던 적절한 도로위계에 따른 도로망 구성 및 접근통제 조절 정책이었다. 따라서 지구설계시 도로망 구성 및 접근통제는 세밀한 연구를 통해 실행되어야 할 것임을 알게 되었다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제24권3호
• /
• pp.29-38
• /
• 2018

Purpose: Space planning to cope with the changing function of the hospital is essential in hospital architecture. In order to do so, it is vital that the paradigm shifts from hospital design focused on purpose toward hospital design focused on system. Not only space planning but also air-conditioning plan, which is most closely related to the operation and maintenance of hospital facilities; and the environment of hospital users, should be able to respond to changes with ease. Thus this study is to provide fundamental data of the air-conditioning plan for the hospital design focused on system by analyzing the concept and characteristics of the air-conditioning plan in the recent hospital architecture planning. Results: As a result of this study, in the air conditioning plan for the hospital architecture planning, the most important are the location relation among the departments the air handling unit room and the air handling unit manage and the air conditioning zoning setting according to the air conditioning system. Therefore, for the hospital architecture planning focused on system, it is necessary to establish the air conditioning setting that can accommodate changeable environment of departments and accordingly the appropriate area range of the air conditioning zoning and the plan for the location of the air handling unit should be considered. Implications: Thereby aims to provide fundamental data on air handling unit zoning planning in the hospital architecture planning.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제26권3호
• /
• pp.17-26
• /
• 2020

Purpose: This paper presents research evidence that the environmental design of the doffing area in a biocontainment unit (BCU) can have a measurable impact on increasing the safety of frontline healthcare workers (HCW) during doffing of high-level personal protective equipment (PPE), and proposes optimized biocontainment unit design. Methods: From 2016 to 2019, The SimTigrate Design Lab conducted 3 consecutive studies, focusing on ways in which the built environment may support or hinder safe doffing. In the first study, to identify the risky behaviors, we observed 56 simulation exercises with HCWs in 4 BCUs and 1 high-fidelity BCU mockup. In the second study, we tested the effectiveness of a redesigned doffing area on improving the HCWs performance and used simulation, observation, and rapid prototyping in 1 high-fidelity mockup of a doffing area. In a follow-up study, we used simulation and co-design with HCWs to optimize the design of a safer doffing area in a full-size pediatric BCU mock-up. Results: We identified 11 specific risky behaviors potentially leading to occupational injury, or contamination of the PPE, or of the environment. We developed design strategies to create a space for safer doffing. In the second study, in a redesigned doffing area, the overall performance of HCW improved, and we observed a significant decrease in the number of risky behaviors; some risky behaviors were eliminated. There was a significant decrease in physical and cognitive load for the HCWs. Finally, we propose an optimized layout of a BCU for a safer process of PPE doffing. Implications: The proposed BCU design supports better staff communication, efficiency, and automates safer behaviors. Our findings can be used to develop design guidelines for spaces where patients with other highly infectious diseases are treated when the safety of the patient-facing HCWs is of critical importance.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.711-714
• /
• 2004

A new design for improving the aperture ratio of bottom emission type AMOLED is investigated. In conventional, the TFT of AMOLED fabrication method is "Etch Stopper (7-mask)", so the aperture ratio is limited in 28${\sim}$33% by Cs(Storage Capacitor). A high aperture ratio TFT is designed by using BCE(Back Channel Etching 5-mask) fabrication way and the aperture ratio is up to 40% shown in 2.2"AMOLED display.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.751-754
• /
• 1998

This research aims at developing a single chip multiprocessor for high-performance computer system. Our design approach is to design a relatively small and simple processor unit and to integrate multiple copies of the unit in an efficient way. The proposed multiprocessor is composed of four CPUs and one graphic coprocessor. The four CPUs share the graphic coprocessor and each CPU implements the 64-bit SPARC-V9 instruction set architecture. This paper gives an overview of the proposed microarchitecture and discusses the considerations made in the course of the design.

• 한국실내디자인학회논문집
• /
• 제12호
• /
• pp.18-24
• /
• 1997

The purpose of this study is to design a new self-governing body's civil service office ahead the period of provincial autonomy. The present civil service office has a linear and contrary structure and conglomates a single unit. But a new civil service office must have a comfortable structure, dividing a minimum unit per department, equpping a ordinary entrance, a creative image, a warm environment and a curved and orthogonal form.

• 한국생산제조학회지
• /
• 제19권1호
• /
• pp.80-88
• /
• 2010

In a conventional system, hydraulic unit pumps out pressurized oil when the power use is not even necessary. As a result, it causes much power loss. This study is on the proposal of new hydraulic unit which controls the revolution of the pump in order to produce proper power needed and to have good response characteristic. In addition, the existing control methods such as PID control method, fuzzy control method, and adaptive control method are applied to the proposed hydraulic unit. Then the best control method is selected and the controller is developed to realize minimum power loss.