• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.353-360
• /
• 2016

Series hybrid electric vehicles (SHEVs) having multiple power sources such as an engine- generator (EnGen), a battery, and an ultra-capacitor require a power control unit with high power density and reliable control operation. However, manufacturing using separate individual power converters has the disadvantage of low power density and requires a large number of power and signal cable wires. It is also difficult to implement the optimal power distribution and fault management algorithm because of the communication delay between the units. In order to address these concerns, this approach presents a design methodology and a power control algorithm of an integrated power converter for the SHEVs powered by multiple power sources. In this work, the design methodology of the integrated power control unit (IPCU) is firstly elaborately described, and then efficient and reliable power distribution algorithms are proposed. The design works are verified with product-level and vehicle-level performance experiments on a 10-ton SHEV.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.199-202
• /
• 2000

In this paper, we developed an expert system that helped a machine-tool designer to select a moderate servomotor of the feed drive unit of a machine tool. With the specification of the drive unit, it searches for the set of servo-motors that have enough torque and power to satisfy the driving condition which the designer defines from the database. me database also contains knowledge and rules, which describe the design process and calculate design parameters of a feed drive. The knowledge-based design support module shows every steps of inference and reason for the solution that it provides.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.276-279
• /
• 2005

The proposed Novel OverDriving Technology with Optimum Look-up-Table（LUT）is suggested to be a better solution to reducing the occurrence of overshooting caused by the traditional overdriving method implemented to normally liquid crystal (VA mode). Chunghwa Picture Tubes, LTD. (CPT) has successfully implement this tech into 20 inch TFTLCD TV module at the present day. The proposed technology can speed up gray-to-gray response time of LCD less than one half of frame time. On the side, Optimum LUT construction apply the compression scheme to record total actual grayscale transfer characteristics instead of applying the normal spread method such as linear / non-linear interpolation. The memory space is been reduced and the distortion of the image quality is lesser.

• 한국주거학회논문집
• /
• 제18권4호
• /
• pp.27-35
• /
• 2007

The use of light steel framing as a method of house construction has increased significantly throughout Japan, United States and Europe. Industrialized unit method are prevailing in developed countries. Unit modular house industry has supported an intensive technical development, and housing systems are now available, which are highly adaptable in form and use. Unit modular house have their own merits and demerits, but the more crucial aspect is that the constant design standard should be applied in each design procedure. It entails the necessity of industrial housing development on the open system basis. This paper describes the general forms of factory product system of unit modular housing system in Korea, United States, Japan. And this study attempts to propose the unit factory product system of which the rate of pre-fabrication is the biggest, that can cope with the demand of user on the basis of open-system.

• 대한토목학회논문집
• /
• 제33권4호
• /
• pp.1361-1375
• /
• 2013

Lee et al. (2011)이 제시한 목감천 유역의 하천복원 설계절차에 근거하여 수리구조물의 설계와 관련 있는 설계홍수량을 산정에 있어 비정상성을 고려하여 산정하였다. 본 연구의 목적은 목감천 유역에서 비정상성을 고려한 새로운 설계홍수량을 제안하기 위함이다. 설계홍수량 산정방법인 설계-호우단위도법과 직접 홍수빈도해석법을 적용하였으며, 각각의 방법에 사용되는 빈도분석은 NCAR (National Center for Atmospheric Research)에서 개발된 extRemes 모형을 통하여 비정상성을 고려하였다. 직접 홍수빈도해석의 방법은 유량으로부터 직접 빈도해석을 수행한다는 점에서 신뢰성이 기대되지만, 설계-호우단위도법보다 다소 과소 추정되었다. 따라서 가장 크게 산정된 설계호우-단위도법의 100년 빈도 설계홍수량을 목감천 유역의 설계홍수량으로 결정하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.483-484
• /
• 2010

Unit cabin means room, which is installed in the high value ship such as drill ship and FPSO, after pre-assembled. In order to develop the noise control design for a unit cabin, a variety of acoustic tests such as sound absorption, transmission, and radiated noise measurements were carried out by using the mock-up of living quarter. From the tests, it was found out that the combined noise level of a unit cabin could be dominated by the radiated noise from wall panel in low frequency range and the design guidelines for the noise control of unit cabin were fully established, such as the improvement of sound transmission loss between the cabin and corridor, and radiated cabin noise reduction.

• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.350-356
• /
• 2011

In this paper, we proposed the automatic cutting mechanism of the perforation pipes in an automobile muffler. This cutting mechanism makes continuous work possible, because it performs the batch work via the sequential operation of loading, feeding, cutting, and discharging. The proposed cutting mechanism consists of the frame unit, escape unit, turning unit, feeding unit, vision system, clamping unit, spindle/cutting unit and cooling unit. And, these mechanisms have been modularized through mechanical, dynamical and structural optimized design using the SMO (SimDesigner Motion) analysis module. Also, the virtual prototype was carried out using the 3-D CAD program. The cutting process cycle is performed in the order of loading, vision processing, feeding, clamping, cutting and discharging. And the cycle time for cutting one piece was designed to be completed in four seconds.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.13-16
• /
• 2008

Solid oxide fuel cell(SOFC) is an electrochemical energy conversion system with high efficiency and low-emission of pollution. In order to reduce the operating temperature of SOFC system under $800^{\circ}C$, the thickness reduction of YSZ electrolyte to be as thin as possible, e.g., less than 10 ${\mu}m$ are considered with the microstructure control and optimum design of unit cell. Methods for reducing the thickness of YSZ electrolyte have been investigated in coin cell. Moreover, a large unit cell($8cm{\times}8cm$) for SOFC was fabricated using an anode-supported electrolyte assembly with a thinner electrolyte layer, which was prepared by a tape casting method with a co-sintering technique. we studied the design factors such as active layer, electrolyte thickness, cathode composition, etc,. by the coin type of unit cell ahead of the fabrication process of a large unit cell and also reviewed about the evaluation technique of a large size unit cell such as interconnect design, sealing materials and current collector and so forth. Electrochemical evaluations of the unit cells, including measurements such as power density and impedance, were performed and analyzed. Maximum power density and polarization impedance of coin cell were 0.34W/$cm^2$ and $0.45{\Omega}cm^2$ at $800^{\circ}C$, respectively. However, Maxium power density of a large unit cell($5cm{\times}5cm$) decreased to 0.21W/$cm^2$ at $800^{\circ}C$ due to the increase of ohmic resistance. However, It was found that the potential value of a large unit cell loaded by 0.22A/$cm^2$ showed 0.76V at 100hrs without the degradation of unit cell.

• 한국주거학회논문집
• /
• 제18권5호
• /
• pp.11-22
• /
• 2007

The purpose of this study is to propose prototypical plans for a dwelling unit applying the concepts of 'open housing' and 'aging in place' for senior citizens living in cities focusing on specific life patterns with chronic disease. Especially, a unit was designed for diabetes patients because diabetes, a representative disease of elderly people, often accompanies complications such as arthritis and Alzheimer disease. A unit design suitable for the convenient life of the elderly people with diabetes will provide a guideline for the similar unit designs of the senior citizens with other diseases. In this study, three types of unit plan are proposed. A-type plan is for type-1 diabetes patients, B-type alt.1 for the independent seniors of type-2 diabetes patients, and B-type alt.2 for the dependant seniors of type-2 diabetes patients. And a support design for a unit plan with the exclusive area of $60\;m^2$ is proposed. The same support design is used for all three unit types. Although the locations of bathroom and storage room are fixed and the location of the kitchen is changeable only in wet-zone. In conclusion, senior residents with diabetes can choose one of three unit types before occupation and the chosen unit type can be renovated by replacing infill systems as the health condition or life style changes.

• 정보교육학회논문지
• /
• 제19권4호
• /
• pp.409-418
• /
• 2015

본 연구의 목적은 백워드 설계 모형을 적용하여 초등학교 소프트웨어 교육 운영 지침의 '알고리즘과 프로그래밍' 단원의 교수학습계획을 개발함으로써, 백워드 설계 모형이 소프트웨어 교육과정 구성에 주는 시사점을 도출하는 것이다. 연구자는 Wiggins와 McTighe의 백워드 설계 탬플릿에 기초하여, '알고리즘과 프로그래밍' 단원의 교수설계를 개발하였다. 첫째, 교육부에서 제시한 소프트웨어 교육과정 운영 지침에 제시되어 있는 목표, 내용체계표, 성취기준, 단원목표 등을 확인함으로써, '알고리즘과 프로그래밍' 단원에 대한 영속적 이해, 포괄적이고 본질적인 질문, 핵심 지식과 핵심 기능을 도출하였다. 둘째, GRASPS 기법을 활용하여 '알고리즘과 프로그래밍' 단원의 수행 과제와 총체적인 루브릭을 개발하였다. 셋째, '알고리즘과 프로그래밍' 단원을 효과적으로 수업하기 위하여, WHERETO 요소의 14개 활동으로 구성된 7차시 수업을 개발하였다. 마지막으로, 백워드 설계 모형을 이용한 교육과정 구성이 소프트웨어 교육에 미치는 효용성에 대하여 고찰하였다. 백워드 설계 모형은 소프트웨어 교육을 위한 단원 및 수업 설계 개선에 많은 시사점을 제공할 것이라 기대한다.