• Magazine of the Korean Society of Agricultural Engineers
• /
• v.13 no.2
• /
• pp.2262-2275
• /
• 1971

Fourteenes rervoirs maintained by the local land improvement associations in the province of Chullabuk-Do and 20 reservoir maintained by thos in the province of Chullanam-Do, were surveyed in connection with a correction between storage capacity and sediment deposit. In addition to this survey, 3,347 of small reservoir, that lie scattered around in the above-mentioned two provinces were investigated by using existing two provinces were investigated by using existing records pertaining to storage capacity in the office of City and country, respectively. According to this investigation the following comclusions are derived. 1. A sediment deposition rate is high, being about $10.63m^3/ha$ of drainage area, and resulting in the average decreasc of storage capaity by 27.5%. This high rate of deposition coule be mainly attributed to the serve denudation of forests due to disorderly cuttings of trees. Easpecially, in small reservoir, an original average design storage depth of 197mm in irrigation water depth is decreased to about 140mm. 2. An average unit storage depth of 325.6mm as the time of initial construction is decreased to 226mm at present. This phenomena causes a greater shortage irrigation water, since it was assumed that original storage quantity was already in short. 3. Generally speaking, seepage rates through dam abutment intakepipe, etc, are high due to insufficient maintenance and management of reservoir. 4. It is recommended that sediment deposit should be dredged when a reservoir is dry in drought. 5. Farmers usually waste excessive irrigation water. 6. Water saving methods should be practiced by applying only necessary water for growing stage of rice. 7. In are as where water defficiency for irrigation is severe, a soil moisture content should be kept at about 70% by applying water once in several days. 8. Tube wells should be provided so as to exploit ground water and subsurface current below stream bed as much as possible. 9. If an intake weir was constructed, a water collection well should be built for the use in drought. 10. Water conservation should be forced by converting devastated forests contained in the drainage area of reservoir to protected forests so as to take priority of yrefor estation, gully control, the prohibition of disorderly cutting of trees, etc. 11. Collective rice nurseries should be adopted, and it should be recommended that irrigation water for rice nurseries is supplied by farmer themselves. 12. Sediment desposit in reservoir should be thoroughly dreged so as to secure a original design storage capacity. 13. The structure of overflow weir should be automatic so as to freely control flood level and not to increase dam height.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.8
• /
• pp.52-59
• /
• 2007

In this paper, we analyzed and measured implant isolation characteristics for a 1.25 Gbps monolithic integrated hi-directional (M-BiDi) optoelectronic system-on-a-chip, which is a key component to constitute gigabit passive optical networks (PONs) for a fiber-to-the-home (FTTH). Also, we derived an equivalent circuit of the implant structure under various DC bias conditions. The 1.25 Gbps M-BiDi transmit-receive SoC consists of a laser diode with a monitor photodiode as a transmitter and a digital photodiode as a digital data receiver on the same InP wafer According to IEEE 802.3ah and ITU-T G.983.3 standards, a receiver sensitivity of the digital receiver has to satisfy under -24 dBm @ BER=10-12. Therefore, the electrical crosstalk levels have to maintain less than -86 dB from DC to 3 GHz. From analysed and measured results of the implant structure, the M-BiDi SoC with the implant area of 20 mm width and more than 200 mm distance between the laser diode and monitor photodiode, and between the monitor photodiode and digital photodiode, satisfies the electrical crosstalk level. These implant characteristics can be used for the design and fabrication of an optoelectronic SoC design, and expended to a mixed-mode SoC field.

• Journal of The Korean Association For Science Education
• /
• v.22 no.4
• /
• pp.872-881
• /
• 2002

Student questioning is included in the priority of science literacy, to enable students to solve problems by exploring questions, communicating and constructing knowledge(AAAS, 1989). Also, the essence of student questioning in science lies in its function as a link between thinking and learning. But educators did not pay much attention to students' questioning in Korea. The purpose of this study was to investigate the effects of science question enhancement instruction on students' science questioning level and achievement. Also, this study showed the effects of other variables(logical thinking, science achievement, interest, and gender) on students' science questioning level. The pretest-posttest control group design group design was used. The sample was consisted of 80 second grade middle school students in experimental group(Science question enhancement instruction) and 74 students in control group(Traditional learning). Students in both groups were received identical content instruction on the unit 'Structures and functions of plant'. These groups were treated for 15 hours during 6 weeks. Students' questions were rated using the four levels described by the Middle School Students' Science Question Rating Scale(r= .96,)(Cuccio-Schirripa & Steinner, 2000). Science achievement data were collected using a 17 item multiple choice test(Cronbach ${\alpha}$= .84). To investigate students' logical thinking ability, a abridged GALT(Cronbach ${\alpha}$= .69) was used. Five-way ANOVA, ANCOVA, and multiple regression analysis were used to analyze the results. The results indicated that students who received instruction on researchable questioning outperformed those students who were not instructed on high-order questioning(p< .01). Results of correlations indicated that instruction(r= .640), science achievement(r= .311) and logical thinking ability(r= .212) was significantly and positively related with students' questioning level. But, interest and gender did not show any significant correlation with students' questioning level. Science question enhancement instruction was more effective on science achievement than the traditional instruction(p< .01).

• Korean Journal of Heritage: History & Science
• /
• v.53 no.3
• /
• pp.80-109
• /
• 2020

The Sacheonwangsa Temple in Silla is an esoteric temple that was founded provisionally in 670, and was completed in 679. This study attempted to elucidate the planning method of the Sacheonwangsa Temple based on the results of research on excavations and investigations into its construction processes and construction measures thereof. The research results are as follows. (1) In the site construction, assuming the size of one Bang (坊) on the south of Nangsan Mountain, after dividing the north-south width into three equal parts, there is a possibility that two of these parts were set to the flat portion. (2) In the 'Jochang (祖創, 670)', it is estimated that an area of 300 cheoks by 300 cheoks was postulated on the flat surface, and, as an initial conception, the mandala's plane design of the outer square 2 hasta (3 cheoks) and inner square 1 hasta (1.5 cheoks) was originally devised for the setting of 'Mudra (神印)', and an area 100 times greater has been set as the basis in the scale and layout planning of the central block. (3) During 'Gaechang (攺刱, ~679)', it is judged that because of the narrowness of the distance between the Pagoda and Geumdang Hall, which occurs when the center of the Geumdang Hall coincides with the center of 'the first stage of the foundation (先築基壇)', the scale and layout planning were adjusted from the initial conception. (4) The arrangement of the building was determined by dividing the fixed size of the central block (280 cheoks by 320 cheoks). Specifically, the east-west direction is set on the quartile's line of the east-west width of the central block, and in contrast, the north-south direction is based on the structural characteristics of the central block. It is presumed that the position of the transept was determined through the division and adjustment of the column spacing of the east-west corridor, then the Geumdang Hall and Altar were based on this. (5) The scale of the Geumdang Hall and Pagoda is determined by the petition of the division by the unit fraction starting from the quartile's line of the central block's east-west width. This planning is understood to be based on the self-similarity, which is rooted in the mandala's plane design as the model.

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.1
• /
• pp.83-89
• /
• 2005

The results that research industrial competitive power of about two hundreds frames manufactures were as follows. First, It's researched that frames industry of Daegu will be worse and worse, and 79 percent of inquiry manufactures in export and 58 percent of them in the domestic demand prospects to be worse. Second, it is analyzed that the commercial profits in 2004 was more decreased to 16.5 percent than 2002. Therefore it is studied that they will be diminished to 5---- comparing with last year by a fall in the exchange rate of the won dollar, in the export unit cost and a raise of raw material price. Third, it is researched that most competitive countries of Daegu glasses manufactures is China and the mext county is japan, ltuly and hik. Fourth, It is studied that average price of glasses of Daegu during last three years(2002~2004) was more disadvantageous than China and Hong Kong, but was more profitable than Italy and Japan by the examination that when Korea is 100, China is 82, Hong Kong 89, Italy 112, Japan 114. Fifth, It is investigated that the average of production cost in Daegu is more disadvantageous than that of China and Hong Kong but is more profitable that of Italy and Japan by the study that when average production cost of Korea is 100, that of China is 78 and that of Hong Kong 89, that of Italy 114. Sixth, It is studied that the Average personal expense of Daegu is much more disadvantageous than that of China and more profitable than Japan and Italy by the analysis that when Korea is 100, China is 74, Hong Kong 98, Japan 112, Italy 113. Seventh, It is analyzed that technique, quality, design of Daegu are more advantageous than those of China, are equal with those of Hong Kong. Eighth, It is studied that Daegu still lags behind more four and five years than developed countries and goes more oheod four years than developing countries.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• Korean Journal of Environment and Ecology
• /
• v.26 no.4
• /
• pp.604-619
• /
• 2012

According to the concept of woodland aesthetic in Germany and forest design in United Kingdom, artificial forest should be restore ecologically step by step in National Park, Korea. This study was carried out to provide the density criterion of thinning for the inducement of the ecological succession by analysing of vegetational structure in Artificial Forest, National Parks. Eleven plots(size is $20m{\times}20m$) were set up in the artificial forest such as Pinus koraiensis forest, Abies holophylla forest, Chamaecyparis obtusa forest, Populus tomentiglandulosa forest, and Larix kaempferi forest and in the natural forest such as Pinus densiflora community, Pinus densiflora-Quercus serrata community, and Quercus serrata community in Chiaksan, Songnisan, Deogyusan, and Naejangsan National Parks, Korea. We classified the artificial forest into undeveloped type of succession, type of alien young trees developing, and early phase type of succession based on the vegetational structure. According to the index of Shnnon's diversity(unit: $400m^2$), undeveloped type of succession was ranged from 0.9681 to 1.1323, type of alien young trees developing was ranged from 1.0192 to 1.1870, early phase type of succession was ranged from 1.3071 to 1.3892, and natural vegetation was ranged from 1.2202 to 1.3428, therefore early phase type of succession forest and natural vegetation are more higher than simple-layered artificial forest with one needle leaf tree species. The limit for the step-by-step thinning was in the range of 30~60%. In case of undeveloped type of succession, we should thin out from large trees throughout three phases, because alien species dominated high value 88~90% in canopy layer. In case of type of alien young trees developing, we should thin out from alien young trees such as Populus tomentiglandulosa throughout one or two phases, because alien species dominated high value 60~97% and young trees with saplings growing up in understory and shrub layer. In case of early phase type of succession, we should thin out from alien trees that compete with native species throughout one or two phases, because alien species dominated less than value 30%.

• Korean Journal of Heritage: History & Science
• /
• v.40
• /
• pp.243-270
• /
• 2007

Linked pearls pattern expressed on textiles have no limited scale or shape when manufacturing, so they are free in expression. And from the design, material, and color we can analogize the social culture of that age. Oriental linked pearls pattern was started from the Sasanian Persia and introduced through the Silk Road, so it is closely connected with the East and the West culture. This study will consider from the 5th century to the 10th century; the mural costume of the West Central Asia, the ancient textiles excavated from the Sinjiang and Qinghai area of China, and the linked pearls pattern which are collected at Shosoin, Japan. And from this study, will concentrate on clarifying the linked pearls pattern's condition of the cultural exchange between the East and the West and it's structural variation process. The design of linked pearls pattern delivered to the East through the Silk Road is differed by area. For example, in the Western Pamir Plateau, where the ancient Sogdians mainly lived, the excavated linked pearls pattern's subject were deer or cassowary variated from the West Asian motif. But the ones excavated from Kucha Xingang had Chinese motifs added so they showed Chinese characters or Buddhist Bodhisattva image instead of Helios. Like this, the appearance of new patterns, which were accompanied by structural variations, gradually deviated from the standardized pattern of the Sasanian Persia. And this structural variation process has relations with the construction and arrangement method of various patterns of the after ages. The foliated floral Spray, which is placed at the lozenge space of linked pearls' space, had developed into ogival - shaped pattern (Neunghwamun). And the prevalence of geometrical structure pattern after the 10th century and the unfolding method of Tapjamun which is arranging unit pattern in order, are similar to the linked pearl pattern. In brief, linked pearls pattern accompanied by technical improvement let us understand the polished artistic code from its expression, and has importance in showing universal pattern beyond region and culture.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.1
• /
• pp.238-259
• /
• 2021

Gameunsa Temple is a Buddhist temple from the mid-Silla period. Construction began during the reign of King Munmu and was completed during the second year of King Sinmun's reign (682). This study is based on the results of excavations at the Gameunsa Temple site, exploring the findings presented in the literature in the field of history. This study also investigates the characteristics of the construction plan of Gameunsa Temple and its correlation with the political, social, and religious environment of the time. The results of the study are as follows: (1) First, it is confirmed that all of the buildings in the central block of Gameunsa Temple, such as the pagoda and corridor, the central gate, and the auditorium, fit within 216 cheoks by 216 cheoks (Goguryeo unit of measurement, estimated dimensions 353.30 mm), in terms of the base structure. This fact is highly significant considering the intent of the King in the mid-Silla period to advocate Confucian political ideals at the Donghaegu sites (Daewangam, Igyeondae Pavilion, and Gameunsa Temple), as confirmed by the relationship between the 'Manpasikjeok legend' and the Confucianism of the etiquette and the music; the relationship between the name of the 'Igyeondae Pavilion' and the 'I Ching'; and the relationship between the 'Taegeuk stones excavated from the Gameunsa Temple site' and the 'I Ching.' Additionally, it may be presumed that the number in the "Qian 216" on the Xici shang of 'I Ching' was used as a basis for determining the size of the central block in the early stages of the design of Gameunsa Temple. The layout of the halls and pagodas of Gameunsa Temple was planned to be within a 216-cheok-by-216-cheok area, from the edge to the center, i.e., on the central axis of the temple, in the following order: the central gate and auditorium, the north-south position of Geumdang Hall, the south corridor, the east-west buildings of the auditorium and the winged corridor, the east-west corridor, and the central position of the east-west stone pagoda. (2) Second, the coexistence of Confucianism and Buddhism in the architecture of Gameunsa Temple is based on the understanding of the Golden Light Sutra, originating from the aspirations of King Munmu to obtain the immeasurable merits (陰陽調和時不越序 日月星宿不失常度 風雨隨時無諸災横) and the light of the Buddha, which is metaphorically represented by the sun and the moon illuminating the whole world of Silla, a new nation with a Confucian political ideology, for a long time by "circumambulating the Buddha (旋繞)". It is also presumed that Gyeongheung, who was appointed by King Munmu to be the Guksa in his will and appointed as the Gukro after the enthronement of King Sinmun, was deeply involved in the conception and realization of the syncretism of Confucianism and Buddhism.

• Korean Journal of Poultry Science
• /
• v.37 no.1
• /
• pp.51-62
• /
• 2010

This study was conducted to investigate the effects of dietary supplementation of multiple probiotics on the performance, small intestinal microflora and immune response in laying hens and broilers. In Exp.1, a total of 800, 82 wk old Hy-line Brown$^{(R)}$ laying hens were assigned to one of the following five dietary treatment; Control, Antibiotics (avilamycin 6 ppm), Probiotics; PB-M (Micro-ferm$^{(R)}$ 0.2%), PB-L (Lacto-sacc$^{(R)}$ 0.1%), PB-Y (Y University probiotics 0.2%). Each treatment was replicated eight times with 20 birds in each replicate and two birds were housed in each cage. Twenty birds units were arranged according to completely randomized block design. Feeding trial lasted 6 wk under 16 h lighting regimen. The Exp. 2, was conducted with a total of 1,000 broilers chicks (Ross$^{(R)}$). They were divided into five treatments, same as those of Exp. 1. Birds were fed starter (0~3 wk) and grower (4~5 wk) diets. Each treatment was replicated four times with 50 birds per pen comprising of deep litter. In Exp. 1, egg production parameters, such as hen-day and hen-house egg production, egg weight, broken and soft shell egg production, feed intake and feed conversion were not significantly different among treatments. However, strength and thickness of eggshell were significantly (P<0.05) different. Among the probiotics, PB-Y showed the highest strength and thickness of eggshell. Eggshell color, egg yolk color and Haugh unit were not significantly influenced. In Exp. 2, overall weight gain (0~5 wk) and mortality were not significantly different among treatments. However, weight gain of birds from PB-Y treatment during starter (0~3 wk) was significantly lower than the birds from Control and Antibiotic treatment. During the whole period (0~5 wk), birds from Antibiotics treatment had higher feed intake and Production Index (PI) and lower feed conversion than birds from Control treatment. Probiotics treatments were not significantly different from the Control on feed intake and feed conversion. In Exp.1, there were significant (P<0.05) differences in leukocytes parameters, such as white blood cell (WBC), hetrophil (HE), lymphocytes (LY), monocyte (MO), eosinophil (EO) and stress index (SI; HE/LY) in the blood of layers. Birds from Antibiotics and probiotics treatments tended to increase these parameters. In Exp. 2, however, only SI was significantly (P<0.05) decreased in Antibiotics treatments. Concentration of serum immunoglobulin (IgG) were higher (P<0.05) in PB-M and PB-Y treatments when compared with Control treatment in Exp. 1. The population of E. coli significantly (P<0.05) decreased in birds from Antibiotics, PB-L and PB-Y treatments when compared with birds from Control treatment in Exp. 1. Metalbolizability of crude fat decreased significantly (P<0.05) in birds from probiotic treatments in Exp. 2. It was concluded that the response of probiotics on the productivity of layers and broilers were different. Probiotics increased strength and thickness of eggshell in layers, and decreased feed conversion and increased PI in broilers. Leukocytes and IgG tended to increase by supplementation of antibiotics and probiotics in layers. Intestinal E. coli tended to decrease in layers. Digestibility of crude fat of diet decreased in probiotics treatments broilers. Parameters of blood and microbial were more sensitive in layers than broilers.