• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.244-249
• /
• 2007

In several locations of the pressurized water reactors, dissimilar metal welds using inconel welding wires are used to join the low alloy steel nozzles to stainless steel pipes. To evaluate the integrity and design the dissimilar welds, tensile and fracture properties variations are needed. In this study, dissimilar metal welds composed of SA508 Gr.3 LAS, inconel 82/182 weld, and TP316 stainless steel were prepared by gas tungsten arc welding and shielded metal arc welding technique. Microstructures were observed using optical and electron microscopes. Different tensile and fracture properties were observed depending on the specimen sampling position at room temperature and $320^{\circ}C,$ and that was discussed based on the microstructure characteristics. It was found that the strength at the bottom of weld was greater than at the top of the weld. Also, from the test data using small punch specimen, more detailed tensile property variations were evaluated.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.87.1-87.1
• /
• 2011

The residential Fuel Cell system has high efficiency of 85% with transferring natural gas to electrical power and heat, directly and it is a friendly environmental new technology in that $CO_2$ emission can reduce 40% compared with conventional power generator and boiler. The residential fuel cell system consists of two main parts which have electrical and hot storage units. The electrical unit contains a fuel processor, a stack, an inverter, a control unit and balance of plant(BOP), and the cogeneration unit has heat exchanger, hot water tank, and auxiliaries. 5kW class fuel process was developed and tested from 2009, it was evaluated for long-term durability and reliability test including with improvement in optimal operation logic. Stack development was crried out through improvement of design and evaluation protocol. Development of system controller was successfully accomplished through strenuous efforts and original control logic was optimized in 5kW class PEMFC system. In addition, we have been focused on development of system process and assembly technology, which bring about excellent improvement of reliability of system. The 5kW class PEMFC system was operated under dynamic conditions for 1,000 hours and it showed a good performance of total efficiency and durability.

• The Journal of Korea Robotics Society
• /
• v.15 no.4
• /
• pp.330-340
• /
• 2020

The purpose of this study was to develop Dementia-Care-Robot integrated program based on group customization and to identify effects on IADL, depression, and attitudes toward robot. This study was nonequivalent control group pre-post test design. The subjects were 40 elders diagnosed with mild dementia participating in the dementia center daily program (20 in the experimental group and 20 in the control group). Each session lasted for 30 minutes, twice a week during 6 weeks. Data were collected from July 16 to November 7, 2019, and were analyzed using SPSS WIN 22.0 program to identify differences between groups for variables. After the program, the experimental group improved in IADL, depression, but there were no significant differences between the two groups. In attitude toward robot, the experimental group showed positive change to the robot, but the control group showed negative change to it, also there was a significant difference between the two groups. Findings indicate that integrated program using Dementia-Care-Robot has potential as a strategy to improve the symptoms of dementia and to delay the progression. It needs to be applied in the medical field through convergent approach of engineering.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.1
• /
• pp.93-102
• /
• 2010

Greening sometimes fails because its method is not suitable for various site conditions, therefore the trend of selecting a revegetation method in Korea today is through test construction. However, due to enlargement, complication and diversification of domestic construction businesses, the importance of VE is gradually increasing as effective efforts over a whole life-cycle to obtain goals such as quality improvement and cost reduction, and not only quality and economic efficiency but also substantiality need to be considered in comparing revegetation methods. For this study, Sungnam~Janghowon (area1), where comparatively various slope revegetation methods are used, was selected the investigation site. The site was divided into three areas:blasting rock, ripping rock and earth sand. The revegetation methods used were six in the blasting rock area, five in the ripping rock area, and two in the earth sand region. 2007 monitoring data was analyzed, and Value (V) was calculated with LCC related ratio, and compared and contrasted with the evaluation of prior revegetation methods. Therefore it is believed that this analysis enables selection of the most appropriate method, unbiased towards one particular characteristic such as quality, vegetation growth and economy. When aiming for a durable effect, it shall be more efficient to select the most appropriate method focusing on LCC analysis, which deals with the economic aspect, as well as the design function aspect.

• Journal of Fashion Business
• /
• v.18 no.4
• /
• pp.97-113
• /
• 2014

This study investigates consumer's traits of market segmentation based on the apparel benefits. The subjects were 302 college students living in Yunnam, China. The mean, ANOVA, factor analysis, Duncan test, and K-means cluster analysis were used for statisticals analysis. The results of this study are as follows. The college students were classified, into six subdivisions, according to the apparel benefits by cluster analysis: indifference group, utility pursuit group, hedonic/brand pursuit group, individuality pursuit group, social recognition/fashion pursuit group, and pursuit benefits-minded group. In the factors of happiness-pursuing and life-centered of materialism, significant differences were found according to the groups of apparel benefits, and all factors of symbolic consumption and brand loyalty were found to have significant differences according to the groups of apparel benefits. The evaluation criteria of clothing were significantly different, depending on apparel benefits subdivision in criteria of aesthetic, socio-psychological, and utility. The use of information was shown to have significant differences, according to the groups of apparel benefits. The study results are highly expected to be utilized as useful sources in marketing plans for the midwest of China.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.476-482
• /
• 2009

This paper describes the development of capacitive sensor for the diagnosis of liquid dielectrics, which is widely used as the electrical insulating oil of transformer, circuit breaker, cable and etc. To survey the dielectric properties of the virgin and aged electrical insulating oils, we utilized the highly precise measuring system, using the principle of cross capacitance. The measured properties were used to determine the design factors of the sensor. Then the factors were optimized with the help of computational analysis. To evaluate diagnosis by the sensor, we performed accelerated thermal aging test about electrical insulating oils. The condition of aged specimens were investigated by measurements of relative permittivity i.e. capacitance change by capacitive sensor. And to evaluate the hysteresis characteristics with the change of temperature, we constructed a testing system, which was composed with vacuum drying oven, oil chamber and measuring instruments, such as LCR meter, MUX and so forth. Through the results of this investigation, we confirmed the superior characteristics of the newly developed sensor.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1619-1626
• /
• 2017

Electronic components that are used in high-level radiation environment require a semiconductor device having a radiation-hardened characteristic. In this paper, we proposed a radiation-hardened I-gate n-MOSFET (n-type Metal Oxide Semiconductors Field Effect Transistors) using a layout modification technique only. The proposed I-gate n-MOSFET structure is modified as an I-shaped gate poly in order to mitigate a radiation-induced leakage current in the standard n-MOSFET structure. For verification of its radiation-hardened characteristic, the M&S (Modeling and Simulation) of the 3D (3-Dimension) structure is performed by TCAD (Technology Computer Aided Design) tool. In addition, we carried out an evaluation test using a $Co^{60}$ gamma-ray source of 10kGy(Si)/h. As a result, we have confirmed the radiation-hardened level up to a total ionizing dose of 20kGy(Si).

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.141-147
• /
• 2012

Recently, the external prestressed concrete structures are increasingly being built. The mechanical behavior of prestressed concrete beams with external tendon is different from that of normal bonded PSC beams in that the increment of tendon stress was derived by whole member behavior. By this reason, the ultimate stress of external tendon is smaller than that of bonded tendon or internal unbonded tendon. The purposes of the present paper are therefore to improve the mechanical behavior of external unbonded tendon by using partially bonded external tendon and to evaluate the flexural behavior of partially bonded external tendon by the flexural member experiment. From the experimental results, before flexural cracking, there was no difference between external unbonded, partially bonded and bonded tendons. However, after cracking, yielding load of reinforcement, ultimate load, and tendon stress were increased in the sequence of external unbonded, partially bonded and bonded tendon members. The equation of ACI-318 and AASHTO 1994 were not matched with test results and had no correlations. So the newly proposed equation will be needed including the consideration of tendon profile, tendon bonded type, and so on. The proposed partially bonded external tendon in this paper will be a effective basis for the evaluation of external tendons in construction and design.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.3
• /
• pp.165-171
• /
• 2005

Itraconazole is a triazole antifungal agent to inhibit most fungal pathogens. However, it is difficult for itraconazloe to be delivered by topical system due to its poor aqueous solubility. First, niosomes containing drug were prepared with span 60, cholesterol. tocopherol and poloxamer 407 as vesicle forming agents in an effort to increase solubility of itraconazole. And then prepared niosomes were dispersed in O/W creams (containing xanthan gum, glycerin, vaseline, glyceryl monostearate and $Cerix^{\circledR}-5$) or gels (containing xanthan gum and poloxamer 407). Both creams and gels were evaluated with respect to their rheological properties, in vitro permeation through excised skin of hairless mouse. Creams or gels containing niosome showed pseudoplastic flow and hysteresis loop. For both creams and gels, viscosity was increased with increasing the content of glycerine or vaseline and the content of gel forming polymer, respectively. In creams, the permeability of drug to skin was decreased with increasing the viscosity of cream. The permeability of drug was affected by pH as well as viscosity of gel. In vitro permeation test results demonstrated that cream formulations showed better permeability than gels. In conclusion, these results suggest that creams formulation containing niosome can be useful for the topical delivery of intraconazole.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.2
• /
• pp.66-71
• /
• 2011

This study analyzed the mechanical characteristics and evaluated their subsequent performance for two types of seals which reinforced characteristics with lower friction and anti-wear functions among the foremost important features in the automotive engine seals; one with the addition of glass fiber to PTFE(Polytetrafluoro ethylene); the other with the addition of self-lubricant molybdenumin addition to the glass fiber. Based on the configuration design of seal installed to the front part in the automotive engine, this study carried out interpretations on the stress and reaction for those two types of oil seals to compare the maximum stress and contact load generated from the seal steel, rubber and PTFE lip. This study also verified the stress concentration and anti-wear performance through the coefficient of friction, torque and durability test by producing two types of PTFE seals actually.