본 연구는 SMART Highway에서 종단선형에 따른 표준트럭의 교통영향을 분석하여 오르막차로 설치 필요성을 검토하고 오르막차로 필요 시 경사길이에 따른 속도변화 곡선을 구하여 제시하는 것을 목적으로 한다. SMART Highway는 미래 고속도로이므로 표준트럭의 실제 주행실험이 불가능하여 VISSIM 시뮬레이션 모형을 이용하여 오르막구간에서 표준트럭의 속도변화를 구하였다. 오르막차로의 표준트럭은 100kg/kW(170lb/hp)로 결정하고 진입속도는 장래 여건을 고려하여 90, 100, 110km/h로 설정하였다. 본 연구결과는 SMART Highway 환경하에서 종단선형 1, 2%에서 오르막차로는 필요하지 않고 3%의 오르막구간에서만 설치 필요성이 있음을 제시하였다. 3% 종단선형에서 오르막차로를 설치하기 위해 진입속도 90, 100, 110km/h에서 경사길이에 따른 트럭의 속도변화 곡선을 제시하였고 오르막차로 설치 위치도 제시하였다.
최근, BIM이 급속도로 확산되면서 여러 공사에서 BIM을 활용한 설계가 시도되고 있지만 설계 및 시공 단계에서 상이한 소프트웨어를 사용할 경우 상호 호환성의 문제가 생길 수 있다. 또한 도입 후 BIM이 위치정보와 연계된 다양한 공간정보 서비스에 활용되기보다 단순히 성과품 제출이나 시각화에 국한되어 있다. 이에 본 연구에서는 결과위주의 BIM성과제출은 무의미하며 활용성이 미비하다고 판단되어 지형공간정보체계와 BIM의 기술 접목을 해결책으로 생각하여, BIM 관련 선행연구들의 고찰을 통해 BIM의 동향 및 문제점을 파악하고자 한다. 또한 토목분야에서의 BIM 특히, 지형공간정보기술 기반의 토목-BIM구축을 위한 DB구축 방안을 제시하였다. 본 연구를 통하여 전 과정에서 발생하는 BIM의 대용량 DB가 향후 지형공간정보기술과 토목-BIM의 연계구축 시스템의 성능저하를 가져올 수 있다고 판단하였다. 이에 최적의 전생애주기 관리를 위한 DB만을 선별하였으며, 각 단계별로 필요한 공간분석기술에 대해 서술하였다.
$Al_2O_3$ 나노입자의 농도별로 전동식 압축기의 회전속도(rpm)의 변화에 따른 자동차용 증기압축 냉동사이클의 COP를 실험적으로 평가하고 나노입자를 적용하지 않은 기준 사이클의 COP와 비교하였다. 이를 위해 실제 하이브리드 자동차에서 쓰는 사이클 부품들을 이용하고 항온항습 챔버를 이용하지 않는 방식으로 장치를 설계 및 제작하였다. 별도의 전동식 인버터 압축기의 제어장치를 활용하여 1000rpm부터 500rpm 간격으로 4000rpm까지와 $Al_2O_3$ 나노입자를 질량비 기준으로 농도 0.05%, 0.1%, 0.2%와 0.5%의 범위에 대하여 실험을 수행하였다. 이를 통해 기준 사이클과 비교하면 기준 사이클의 일반적인 운전조건인 약 3000rpm에서 $Al_2O_3$ 나노유체를 적용하는 사이클의 COP는 질량 농도비 0.05%에서는 15.4% 정도, 농도비 0.1%, 0.2% 및 0.5%에서는 각각 9.4%, 13% 및 9.6%가 증가함을 알 수 있었다.
The new spectrometer for X-ray Induced Electron Emission Spectroscopy (XIEES) .has been recently developed in KRISS in collaboration with PTI (Russia). The spectrometer allows to perform research using the XAFS, SXAFS, XANES techniques (D.C.Koningsberger and R.Prins, 1988) as well as the number of techniques from XIEES field(L.A.Bakaleinikov et all, 1992). The experiments may be carried out with registration of transmitted through the sample x-rays (to investigate bulk samples) or/and total electron yield (TEY) from the sample surface that gives the high (down to several atomic mono-layers in soft x-ray region) near surface sensitivity. The combination of these methods together give the possibility to obtain a quantitative information on elemental composition, chemical state, atomic structure for powder samples and solids, including non-crystalline materials (the long range order is not required). The optical design of spectrometer is made according to Johannesson true focusing schematics and presented on the Fig.1. Five stepping motors are used to maintain the focusing condition during the photon energy scan (crystal angle, crystal position along rail, sample goniometer rail angle, sample goniometer position along rail and sample goniometer angle relatively of rail). All movements can be done independently and simultaneously that speeds up the setting of photon energy and allows the using of crystals with different Rowland radil. At present six curved crystals with different d-values and one flat synthetic multilayer are installed on revolver-type monochromator. This arrangement allows the wide range of x-rays from 100 eV up to 25 keV to be obtained. Another 4 stepping motors set exit slit width, sample angle, channeltron position and x-ray detector position. The differential pumping allows to unite vacuum chambers of spectrometer and x-ray generator avoiding the absorption of soft x-rays on Be foil of a window and in atmosphere. Another feature of vacuum system is separation of walls of vacuum chamber (which are deformed by the atmospheric pressure) from optical elements of spectrometer. This warrantees that the optical elements are precisely positioned. The detecting system of the spectrometer consists of two proportional counters, one scintillating detector and one channeltron detector. First proportional counter can be used as I/sub 0/-detector in transmission mode or by measuring the fluorescence from exit slit edge. The last installation can be used to measure the reference data (that is necessary in XANES measurements), in this case the reference sample is installed on slit knife edge. The second proportional counter measures the intensity of x-rays transmitted through the sample. The scintillating detector is used in the same way but on the air for the hard x-rays and for alignment purposes. Total electron yield from the sample is measured by channeltron. The spectrometer is fully controlled by special software that gives the high flexibility and reliability in carrying out of the experiments. Fig.2 and fig.3 present the typical XAFS spectra measured with spectrometer.
DPM (Digital Phase wrapping Modulation) open-loop polar transmitter는 in-phase와 quadrature 신호를 진폭(envelope) 신호와 위상(phase) 신호로 변환한 후 신호의 사상화 과정을 거쳐 광대역 통신 시스템에서의 효율적인 적용이 가능하다. 사상화 과정은 일반적인 통신 시스템에서의 양자화와 유사하며 그 과정에서 발생하는 오차를 고려할 때 좌표계 변환부에 CORDIC (COordinates Rotation DIgital Computer) 알고리듬 대신 테일러 급수 근사 기법의 사용이 가능하다. 본 논문에서는 테일러 급수 근사 기법을 광대역 OFDM (Orthogonal Frequency Division Multiplexing) 시스템용 DPM polar transmitter의 직교 좌표계-극 좌표계(cartesian to polar coordinate) 변환부에 적용하는 방안에 대한 연구를 수행하였다. 기존의 방법은 CORDIC 알고리듬을 채용하고 있다. 이것을 효율적으로 적용하기 위해 모의 실험을 통해 각각의 기법에 대한 평균제곱오차 (MSE : Mean Square Error) 성능을 측정하고, 설계 관점에서 허용된 CORDIC 오차를 기준으로 알고리듬의 최소 반복횟수와 테일러 급수의 최소 근사 차수를 찾는다. 또한 FPGA 전달 지연속도를 비교한 결과에 의하면 CORDIC 알고리듬 대신 낮은 차수의 테일러 급수 근사 기법을 사용해 좌표 변환부의 처리 속도를 향상시킬 수 있음을 확인하였다.
국내 임목수확작업에 사용되고 있는 트랙터 기반 소형 타워야더는 소경재 생산을 목적으로 개발되었으며, 중대경재 수확 체제로 변화함에 따라 견인 성능의 개선이 필요하다. 이 연구는 동력 전달방식을 기존의 기계식에서 기계 유압식으로 개선하여 타워야더의 최대 견인력을 비교·분석하였으며, 트랙터 엔진속도, 유압식 동력 전달 기구의 압력을 변수로 두고 견인 성능 실험을 실시하였다. 실험 수준은 트랙터 엔진속도(1,200, 1,400, 1,600, 1,800, 2,000, 2,200 rpm) 6수준, 동력 전달 기구의 압력(4.9, 6.9, 8.8 MPa) 3수준으로 선정하였다. 기존의 경우 최대 견인력은 엔진 회전속도 757 rpm에서 15,146.6 N의 최대견인력을 발휘하였으나 개선된 타워야더는 엔진 회전속도 1,575 rpm에서 36,140 N의 최대 견인력이 나타나, 최대 견인력이 2.4배 증가되었다. 이에 따라 중대경재 위주의 목재수확 현장에서 작업이 가능할 것으로 판단된다. 또한 기존 장비를 재활용하여 성능 개선함으로써 견인력이 큰 집재장비의 신규 도입 및 운영에 필요한 비용을 줄일 수 있을 것으로 기대된다.
본(本) 연구(硏究)에서는 특정지역에서 태풍(颱風)의 통계적(統計的) 분석(分析) 및 확률적(確率的) 기술방법(記述方法)을 이용하여 한국(韓國)의 태풍위험도분석(颱風危險度分析)에 관한 합리적(合理的) 방법(方法)을 제시(提示)하였다. 간접적(間接的) 방법(方法)으로 태풍(颱風)의 확률풍속(確率風速)을 예측하기 위해 두가지 시뮬레이션 과정(過程) 및 fitting 방법(方法)에 대해 논(論)하였다. 일반적으로 간접적(間接的) 방법(方法)으로는 Russell의 방법(方法)이 사용되고 있는데 이 방법(方法)은 특정지역에서 태풍(颱風)의 확률적(確率的) 예측을 위한 기상학적(氣象學的) 특성(特性)과 풍속장(風速場)모형(Wind field Model)에 기초를 두고 시뮬레이션 방법(方法)에 의해 약 1,000개의 태풍(颱風)을 발생시켜 통계적(統計的)으로 기저확률분포(基底確率分布)를 구한 다음, 그 결과를 Weibull분포(分布)에 fitting하도록 하고 있다. 그러나, 본(本) 연구(硏究)에서는 150년(年) 내지 200년간(年間)의 연최대풍속(年最大風速)을 발생시켜 그 data를 이용하여 Weibull분포(分布)에 직접 fitting하는 방법(方法)을 제안(提案)하였다. 수치해석(數値解析)결과, 본(本) 연구(硏究)에서 제안(提案)한 방법(方法)이 보다 효율적(效率的)이고 합리적(合理的)인 태풍(颱風)의 위험도평가방법(危險度評價方法)임을 알 수 있었다. 아울러, 제안(提案)된 확률풍속(確率風速) 예측방법(豫測方法)을 이용하여 태풍(颱風)취약지역인 남서해안(海岸) 일대에서 송전탑(送電塔)의 설계풍속(設計風速)에 대해 검토, 분석하였다.
본 논문에서는 항공 방제 시 균일 방제를 통하여 병해충에 의한 농산물 생산량 저하 및 농약이 과도 살포된 농작물 생산을 방지하고자 하였다. 항공 방제가 실시되는 비행 고도 3m와 속도 15km/h를 유지하는 것은 사용자의 조종 습관 및 방법, 바람의 변화 같은 환경적 요인이 작용하여 대단히 어렵다. 따라서 무인 헬리콥터로부터 비행 데이터를 전송받아 비행속도 및 고도의 변화에 따라 붐의 각도와 DC 펌프의 제어가 가능하도록 살포 장치 및 제어기를 설계 및 제작하였고 무성항공사의 무인 헬리콥터 Rmax에 탑재하여 살포 성능을 검증했다. 실험은 가로 10m, 세로 50m의 농지에서 감수지를 한 열에 1.25m 간격으로 9장씩 5열을 5m의 위치에서부터 10m 간격으로 배치하고, 방제 실험 시 제작된 항공 살포 시스템을 이용하여 살포하였다. 무인 헬리콥터는 최저속도 7.2km/h부터 최고속도 17.6km/h, 최저높이 2.32m부터 최고 3.47m까지 최고 10.4km/h의 속도 변화와 1.15m 고도 변화를 보이며 비행하였고, 각 열이 평균 46423개의 입자개수의 분포로 7.5m의 유효 살포 영역을 형성함을 보여 제안된 항공 살포시스템이 균일 방제에 효과가 있음을 증명한다.
전파천문분야에서 관측데이터의 저장을 위해 대용량 HDD를 RAID로 연결한 디스크 팩을 활용하고 있다. VLBI 관측의 경우 관측속도가 빨라지고 광대역으로 확장되면서 많은 양의 관측데이터를 저장해야 한다. HDD는 사용회수가 많아질수록 고장이 많이 발생하고 있으며, 이것을 찾아서 복구하는데 많은 시간이 소요된다. 또한 고장난 HDD를 계속 사용할 경우 관측데이터의 손실이 발생한다. 그리고 새 HDD를 구입하여 많은 비용도 필요하게 된다. 본 연구에서는 FirmOS를 이용하여 SATA HDD의 무결성 검사 시스템을 개발하였다. FirmOS는 일반 서버보드와 CPU를 갖는 시스템에서 특정목적에만 동작하도록 개발한 OS이다. 개발한 시스템은 FirmOS 기반에서 SATA HDD의 물리적인 영역에 특정 패턴의 데이터를 쓰고 읽는 과정을 수행한다. 그리고 HDD 제어기의 메모리 영역에서 HDD로부터 읽어들인 저장된 패턴 데이터와 비교를 수행하는 방식으로 HDD의 무결성 검사를 확인하는 방법을 채용하였다. 개발한 시스템을 활용하여 VLBI 관측에서 활용하고 있는 디스크 팩의 고장여부를 쉽게 확인할 수 있었으며, 관측효율을 향상시킬 수 있는데 많은 도움이 되고 있다. 본 논문에서는 개발한 SATA HDD 무결성 확인 시스템의 설계, 구성, 시험 등에 대해 자세히 기술한다.
Purpose: The purpose of this study is to develop a walking-type two-row sesame reaper, which can simultaneously perform the cutting and collecting of sesame plants and other crops like perilla and soybean. Methods: The factors involved in reaping sesame were determined experimentally in order to design a prototype of the sesame reaper. The prototype is made up of four parts for cutting, conveying, collecting, and running. The height of two disc-plate saw blades on the cutting part is adjusted by an adjusting wheel, and peripheral speed is adjusted in accordance with the running speed. The conveying belt of the conveying part can be tilted from $0^{\circ}$ to $90^{\circ}$. The collecting part extracts a predetermined amount of transferred sesame plants. The prototype was used to evaluate the performance at different working speeds, so that the work efficiency can be calculated. Results: The center of gravity of the sesame plants was 900 mm, measured from the end of the cut stem. The diameter of the disc-plate saw blade was determined to be 355 mm, peripheral speed was 20.4-32.7 m/s, and the picking height of the conveying belt for sesame was 130 mm. The performance of transfer and collection of the sesame, when the insertion angles were $60^{\circ}$ and $90^{\circ}$, proved to be excellent. However, when the angle was over $120^{\circ}$, the performance was only 75-80%. The performance was at 100% efficiency when the ratio between running speed and conveying belt speed of the prototype was 1:2, which seems to be the ideal ratio for the sesame reaper. Conclusions: A sesame reaper was developed, which can integrate the processes of cutting, conveying, and collecting, by investigating and considering various factors involved in the reaping process. The sesame reaper can reduce the costs for yielding and producing sesame due to its highly efficient performance.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.