• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.688-692
• /
• 2000

This study proposed design parameters of opening spring of circuit breaker that cut off the over-current in order to protect the electric device about opening speed using the energy method. We simulated the opening kinetic energy, the potential energy of opening spring and the design parameters of opening spring with respect to opening speed of VCB (Vacuum Circuit Breaker)'s moving contactor which has 24kV 25kA break capacity. From the result of simulation the initial tensional force and the final tensional force of the opening spring chose 107kgf and 282kgf respectively. Through the dynamic analysis using ADAMS, We verified that the opening speed of moving contactor satisfied break capacity of VCB and analyzed opening dynamic characteristics of VCB such as the opening displacement, the opening velocity and the opening acceleration of moving contactor in time domain.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권6호
• /
• pp.278-286
• /
• 2005

Recently, high-speed centrifugal turbo-compressors have been under intensive research and development. Since, compared to conventional compressors, high-speed centrifugal compressors hive numerous qualities such as simple structure, light weight small size, and high efficiency, etc. In cope with such industrial demands, a high-speed brushless DC motor for a 50-kW, 70-krpm turbo-compressor was developed based on a 2-D analytical method, of which design was verified using the FE analysis. A prototype machine was also fabricated and tested to confirm the analytical design. Preliminarily obtained experimental data using the prototype mac]line shows the validity of the analytical approach.

• 로봇학회논문지
• /
• 제6권3호
• /
• pp.230-236
• /
• 2011

In previous researches, the self-stability was studied for the spring-mass model and the two segment leg model. In these researches, it was presented that the spring-mass model has the self-stable region at relatively high speed running and the two segment leg model has the self-stable region at relatively low speed running. If the model was run in the self-stable region, the cost of transport is zero ideally. That is, actually, only the energy loss is needed to compensate for running. This means that the energy efficiency is high, running in the self-stable region. We want to have high energy efficiency at low and high speed running. So, in this paper, we propose the design direction of the three segment leg having the self-stable region at low and high speed running. And we prove the self-stable region of the three segment leg designed by the proposed design direction.

• 한국정밀공학회지
• /
• 제21권6호
• /
• pp.52-59
• /
• 2004

Recently the high speed end-milling processing is demanded the high-precise technique with good surface roughness and rapid time in aircraft, automobile part and molding industry. The working factors of high speed end-milling has an effect on surface roughness of cutting surface. Therefore this study was carried out to analyze the working factors to get the optimum surface roughness by design of experiment. From this study, surface roughness have an much effect according to priority on distance of cut, feed rate, revolution of spindle and depth of cut. By design of experiment, it is effectively represented shape characteristics of surface roughness in high speed end-milling. And determination($R^2$) coefficient of regression equation had a satisfactory reliability of 76.3% and regression equation of surface roughness is made by regression analysis.

• 한국철도학회논문집
• /
• 제18권2호
• /
• pp.117-126
• /
• 2015

600km/h급 철도노반 개발은 초고속주행에 의한 동적상호작용의 예측이 어렵기 때문에 기술개발에 애로사항이 많다. 특히 교량/토공 접속부는 동적 상호작용을 포함하여 지지력, 압축, 침하, 배수, 유동 등의 영향 요소가 복합적으로 발생하는 구간으로서 접속부에서의 안정성이 확보된다면 초고속 열차용 토공노반의 안정성도 확보 가능할 것으로 예상된다. 본 논문에서는 초고속철도 접속구조개발의 기초 연구단계로서 국내 고속철도에서 적용하고 있는 접속부의 보강방안을 우선적으로 적용하여 초고속 주행시의 설계변수 영향을 해석적으로 검토하였다. 설계변수는 설계단계에서 검토 가능한 항목인 보강방안의 유무, 기하하적 형상, 재료의 강성 등이며, 분석내용은 초고속주행에 따른 궤도의 변형응답과 주행안정성을 검토하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.111-117
• /
• 2004

The tool geometry parameters and cutting process have complex relationships. Until now, various cutting test were needed to acquire optimal design of end mill for the purpose of high speed machining, due to the insufficient knowledge about cutting process. In high speed machining. Using various tools with different geometry, relationships between tool geometry parameter (rake angle, clearance angle, length of cutter) and cutting process (cutting force, surface accuracy, surface roughness) have been studied. Acquired data can be used to design optimal tool for high speed machining and developed tool geometry design S/W.

• 한국철도학회논문집
• /
• 제10권2호
• /
• pp.124-130
• /
• 2007

The emphasis of this paper is to find out the changes in length of nose in line with speed improvement and changes of the tendency in the shape of the nose in line with time series based on the Shinkansen vehicle. The length of the nose on the lines of high speed tends to get longer, however there is no proportion between the speed and the nose according to optimal design that was designed to reduce micro-pressure wave and air resistance. The Shinkansen vehicles, according to the shape, can be classified in to an Advanced Paraboloid shape, a Sharp-nosed shape, a Flat-nosed shape and an Organic Double-edged shape and is gradually changing in the trend of diversity and distinction. Hereafter, the design of the nose will be developed better into the design that will comprehend identity of manufacturer, region and culture on the basis of optimized aerodynamic shape.

• 소음진동
• /
• 제10권4호
• /
• pp.636-641
• /
• 2000

KHST(Korea High Speed Train) project plans to design and to build an high speed train. There are noise requirements in passenger room for the standing and running condition, which should be reached. Predicted noise calculated for the standing and running TM5(Motorized car) and TT4(Trailer car) train (v=300 km/h and v=350 km/h) to find out critical areas in or around the train. From the estimation in DWA IfS, actions of noise reduction are proposed to reach the requirements. This paper takes the review of the calculated results in DWA IfS to propose a new design of inner wall.

• 소음진동
• /
• 제9권6호
• /
• pp.1106-1115
• /
• 1999

This paper sums up the study of the soundproof facilities (noise barriers) to be placed on the test track section within the Seoul-Pusan H.S.T. project. The objective of this study is to determine optimum design of soundproof including height, length, location, sound absorbing materials for test track(chonan-taejon). This paper shows the model to design the shape and materials of noise barrier for high speed trains(TGV, ICE, ect). The design of soundproof facilities is to be conducted by MITHRA for the prediction of noise impact of the TGV and for optimising noise barriers in order to reduce the noise generated by high speed trains. A number of computer simulations are carried out in order to determine the specification of noise barrier on test track.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.835-840
• /
• 2008

Next Generation High Speed Train having a distributed electrical motor system has just been developing to aim the experimental maximum speed at 400km/h since August, 2007. This project is in stage of concept design and so, it needs to take some review and analysis the characteristics of suspensions on the view of concept design. A vehicle modeling is made of modified Korean High Speed Train bogie model with Vampire program and analyzed the effect on the dynamic performances according to the variation of primary and secondary suspension characteristics. The results would be useful to manage the potential risks in the next stage of basic and precision design that will be done by the manufacturing company.