• 제목/요약/키워드: Design Slimness

검색결과 10건 처리시간 0.022초

초소형 하드디스크에서 램프 형상 분석 및 설계 프로세스 연구 (Design Procedure and Analysis of Ramp Profile in SFF HDD)

  • 이용현;박경수;박노철;양현석;박영필
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2006년도 춘계학술대회논문집
    • /
    • pp.384-387
    • /
    • 2006
  • Vertical L/UL (Load/Unload) velocity is very important parameter to determine the L/UL performance, and the vertical velocity is determined by the actuator velocity and the ramp profile. However, it is not easy to precisely control the actuator rotating velocity during the L/UL process. Especially in emergency parking, servo system doesn't operate, it is impossible to control an actuator velocity. Then, the vertical unloading velocity depends on only ramp profile. The ramp height and the sliding length for L/UL process in SFF (Small Form Factor) HDD are restricted due to slimness and small media. For these reasons, it is very difficult to design the ramp profile in SFF HDD. Therefore, this study analyzes the unloading dynamic characteristics for various ramp profiles and makes the thesis for ramp profile design.

  • PDF

초소형 하드디스크에서 램프 형상 분석 및 설계 프로세스 연구 (Design Procedure and Analysis of Ramp Profile in SFF HDD)

  • 이용현;박경수;박노철;양현석;박영필
    • 정보저장시스템학회논문집
    • /
    • 제2권2호
    • /
    • pp.150-155
    • /
    • 2006
  • Vertical L/UL (Load/Unload) velocity is very important parameter to determine the L/UL performance, and the vertical velocity is determined by the actuator velocity and the ramp profile. However, it is not easy to precisely control the actuator rotating velocity during the L/UL process. Especially in emergency parking, servo system doesn't operate, it is impossible to control an actuator velocity. Then, the vertical unloading velocity depends on only ramp profile. The ramp height and the sliding length for L/UL process in SFF (Small Form Factor) HDD are restricted due to slimness and small media. For these reasons, it is very difficult to design the ramp profile in SFF HDD. Therefore, this study analyzes the unloading dynamic characteristics for various ramp profiles and makes the thesis for ramp profile design.

  • PDF

외모에 대한 사회문화적 태도가 남성 소비자의 의복구매행동과 외모관리행동에 미치는 영향 (The Effects of Sociocultural Attitudes toward Appearance on Male Consumers' Apparel Buying Behavior and Appearance Management Behavior)

  • 이미숙
    • 한국의상디자인학회지
    • /
    • 제16권3호
    • /
    • pp.15-31
    • /
    • 2014
  • The purpose of this study was to investigate the effects of sociocultural attitudes toward appearance on male consumers' apparel buying behavior and appearance management behavior. The subjects were 353 males aged from 40 to 59 years old. The research method was a survey and the questionnaire consisted of sociocultural attitude toward appearance items, apparel buying behaviors items, appearance management behaviors items, and subjects' demographic characteristics items. The data were analyzed by Cronbach's ${\alpha}$, factor analysis, cluster analysis, multiple response analysis, ${\chi}2$ test, ANOVA and Duncan's multiple range test. The results were as follows. Three dimensions (appearance importance awareness, slimness importance awareness, internalization) were emerged on sociocultural attitude toward appearance, and subjects were divided into 4 groups(receptive, unreceptive, awareness, and internalized group) by this variable. The 4 groups by sociocultural attitude toward appearance showed many differences on apparel buying behaviors and appearance management behaviors. Receptive and internalized group more importantly regarded fashion trend and store display as apparel buying motives, design and trend as selection criteria, and did shopping to buy clothes more often than awareness and unreceptive group. Receptive and internalized group recognized higher the need for various appearance management behaviors and spent more expense to enhance their appearance than other groups.

  • PDF

외모에 대한 사회문화적 태도와 객체화 신체의식이 남성 소비자의 외모관리행동에 미치는 영향 (The Effects of Sociocultural Attitude toward Appearance and Objectified Body Consciousness on Male Consumer'Appearance Management Behavior)

  • 이미숙
    • 한국의상디자인학회지
    • /
    • 제16권4호
    • /
    • pp.63-77
    • /
    • 2014
  • The purpose of this study was to investigate the effects of sociocultural attitudes toward appearance and objectified body consciousness on male consumer' appearance management behavior. The subjects were 648 males aged from 20 to 59 years old, and the questionnaire consisted of sociocultural attitude toward appearance, objectified body consciousness, appearance management behavior, and subject' demographic characteristics. The data were analyzed by descriptive statistics, Cronbach's ${\alpha}$, factor analysis, and regression analysis. The results were as follows. Three dimensions(appearance importance awareness, slimness importance awareness, and internalization) were emerged on sociocultural attitude toward appearance. Three dimensions(body shame, body surveillance, and control belief) were emerged on objectified body consciousness. Five dimensions(skin, hair, body, fashion, and plastic surgery management) were emerged on appearance management behavior. In sociocultural attitude toward appearance dimensions, appearance importance awareness and internalization had important effects on appearance management behavior. In objectified body consciousness dimensions, body shame and control belief had important effects on appearance management behavior. This results concluded that sociocultural attitude toward appearance and objectified body consciousness are important variables to understand on male consumer' appearance management behavior.

  • PDF

수평 선형 진동 모터에 적용 가능한 높은 피로 수명을 가진 판 스프링 설계 (Design of leaf spring with high fatigue life applied to horizontal linear vibrating actuator)

  • 이기범;김진호
    • 한국산학기술학회논문지
    • /
    • 제13권12호
    • /
    • pp.5684-5688
    • /
    • 2012
  • 본 논문은 수평 선형 진동 모터에서 운동자의 가이드 역할을 하는 높은 피로 수명을 가진 판 스프링의 설계를 다루고 있다. 현재까지 수직 선형 진동 모터가 스마트 폰의 햅틱 기능과 수신 알람 기능을 위한 진동 발생 장치로 사용 하고 있다. 하지만 이 진동모터는 수직 진동 방향의 특성으로 인해 스마트 폰 슬림화의 한계에 대해 한 가지 주요 원인이 되고 있다. 수평 선형 진동 모터의 부품 중에서 가이드 역할을 하는 스프링은 핵심 부품 중에 하나이다. 그리고 이 가이드 스프링은 작동기의 탄성적인 진동을 가능하게 한다. 다양한 판 스프링이 디자인 되었고, 높은 피로 수명을 가지며, 요구되는 강성을 측정하기 위하여, 상용 구조해석 프로그램인 ANSYS를 이용하였다. 그리고 시제품을 제작하여 진동 가속 및 스프링 수명 시간을 측정하기 위한 실험을 하였다.

굴절/회절 하이브리드 렌즈 적용 슬림 모바일 렌즈 설계 (Slim Mobile Lens Design Using a Hybrid Refractive/Diffractive Lens)

  • 박용철;주지용;이준호
    • 한국광학회지
    • /
    • 제31권6호
    • /
    • pp.281-289
    • /
    • 2020
  • 본 논문은 하이브리드 굴절/회절광학소자를 이용한 초슬림 모바일 카메라 렌즈를 보고한다. 먼저 앞서 보고된 23개의 광학 설계 사양 분석을 통해 전장길이(total track length) 최소화를 위하여, 광시야 렌즈 설계에서 일반적으로 적용되는 음(-)의 렌즈를 제1렌즈로 사용하는 리트로포커스(retrofocus) 타입이 아닌, 양(+)의 렌즈가 제일 먼저 선행하는 텔레포토(telephoto) 타입을 선택하였다. 이후 초기 최적 설계 및 제르니케 다항식 기반 수차 분석을 통한 보정 설계를 진행하였으며, 보정 설계 과정에서 잔여 구면색수차(chromatic spherical aberration)의 효과적 제거를 위하여 굴절 및 회절이 결합된 하이브리드 렌즈 1매를 적용하였다. 적용된 최종 설계는 하이브리드 렌즈 1매 포함 총 6매의 렌즈를 이용하여 F/2.0, 화각 90°, 유효초점길이 2.23 mm, 전장길이 3.7 mm를 달성하였고, 결과적으로 1.7의 낮은 전장길이 대 초점길이 비 즉, 텔레포토비(telephoto ratio)를 달성하였다. 동일 전장길이를 갖는 하이브리드 렌즈 미적용 비교 설계 대비, 공간주파수 180 cycles/mm에서 MTF 값이 중심 시야에서는 63%에서 71~73%로 약 8~10% 개선되었고, 0.5, 0.7, 0.9 시야에서도 2~3% 개선되었다. 또한, 가공성 및 회절 패턴에 의한 산란 등을 고려하였을 때 조리개에 위치한 렌즈가 하이브리드 렌즈로 적절함을 알 수 있었고, 이 경우 2개의 회절존으로도 성능 개선이 확인되었다.

경전철 역사를 대체하는 정류장 도입을 위해 필요한 설계지침의 도출 및 적용 사례에 관한 연구 (On the Study of Design Guidelines and a Design Case to Enable the Replacement of LRT Stations by Stops)

  • 김주욱;박기준;이지언;이재천
    • 한국산학기술학회논문지
    • /
    • 제16권5호
    • /
    • pp.3499-3510
    • /
    • 2015
  • 중단거리 수송을 위한 도시철도의 수요 증대에 부응하기 위해, 건설비 및 운영비 등의 절감을 실현할 수 있는 경전철 시스템의 도입이 국내에서 본격화되고 있다. 비록 경전철 시스템이 관련 규정에 근거하여 설계 및 시공, 그리고 운용되고 있지만, 일부 과다한 기준 및 사양을 맞추기 위해서 건설 및 운용 등에 초과 비용이 투입되는 것에 대한 문제점이 제기되고 있다. 게다가 경전철 역사의 경우 사용자의 동선이 불필요하게 길어져 시민들과 교통약자의 불편을 초래할 수 있다는 점이 지적되고 있어 경전철 역사의 슬림화가 필요한 상황이다. 이에 본 연구에서는 하나의 방안으로 경전철 역사 대신에 버스정류장 개념에 해당하는 '경전철 정류장' 개념의 도입을 위해 필요한 설계지침에 대해 연구하였다. 구체적으로 정류장 개념 도입을 뒷받침하기 위한 설계 기본방향 및 지침을 수정/보완하여 도출하였다. 또한 이를 상세설계에 적용시키는 사례 연구를 수행하였다. 본 연구결과의 활용을 통하여 경전철의 건설 및 운영 비용의 절감, 시민들의 경전철 이용편의 증진 등의 결과로 교통복지를 강화할 수 있는 기회가 될 것이다.

남성 소비자의 외모에 대한 사회문화적 태도와 의복 및 화장품 구매행동 연구 - 2030대와 4050대의 비교분석을 중심으로 - (A Study on Sociocultural Attitudes toward Appearance and Clothing and Cosmetics Purchasing Behaviors of Male Consumers - Focused on Comparative Analysis between 20s~30s and 40s~50s -)

  • 이미숙
    • 한국의류산업학회지
    • /
    • 제20권4호
    • /
    • pp.389-399
    • /
    • 2018
  • The purpose of this study was to investigate the differences of sociocultural attitudes toward appearance, clothing and cosmetics purchasing behaviors according to male consumer's age group. The research method was survey and subjects were 656 male consumers. The results were as follows. First, three factors (appearance importance awareness, appearance internalization, and slimness importance awareness) were emerged on sociocultural attitudes toward appearance. Young age group showed higher level of appearance importance awareness and internalization than middle age group. Second, there were many differences on clothing purchasing behaviors by age variable. Young age group more importantly considered psycho-social purchasing motives, aesthetic selection criteria, and the internet as information source and purchasing place than middle age group. Whereas middle age group more importantly considered practical purchasing motives, practical selection criteria, and store display & salesman as information sources, and fashion outlet as purchasing place than young age group. Third, there were also many differences on cosmetics purchasing behaviors by age variable. Young age group used more and various cosmetics, and they more importantly considered skin improvement as purchasing motive, skin suitability and price as selection criteria, the internet as information source and purchasing place than middle age group. On the other hand, middle age group generally used fundamental cosmetics, and they more importantly considered skin protection as purchasing motive, quality as selection criterion, TV and store display & salesman as information sources, and discount store and cosmetics speciality store as purchasing places than young age group.

개선된 DSM 기법을 통한 경전철 정거장 기능실의 슬림화에 관한 연구 (On Slimming down the Functions Room of Light Rail Transit Stations by Utilizing an Enhanced DSM Method)

  • 김주욱;박기준;김영민;이재천
    • 한국산학기술학회논문지
    • /
    • 제16권2호
    • /
    • pp.927-939
    • /
    • 2015
  • 오늘날 산업 기술의 발달에 따른 고도화로 인해, 고속철도로 대변되는 전국망 철도 운영과 함께, 도시 내 또는 교외의 단거리 구간을 운영하는 철도사업에 관심이 증대되고 있다. 특히, 일반철도라 불리는 기존의 중전철에 비해서, 후자의 경우는 단거리 운행에 따른 특성으로 경량전철의 형태로서, 보다 작은 규모의 철도차량 및 역사(정거장)으로 운영이 가능할 것으로 기대되고 있다. 또한 철도차량의 무인화 운행 및 정거장 운영 인력의 감축도 주요 관심사로 부상하고 있다. 하지만, 경량전철시스템의 기반 시설인 역사의 경우, 시설을 시공하는데 있어서 기존의 중전철의 설계지침 및 관련법에 의해 건설되고 있다. 따라서 이러한 지침에 의해 건설되는 역사는 소형화의 추구 방향과는 거리가 있게 된다. 경량전철 역사의 슬림화 목적을 달성하기 위해서는 단순히 건축학적 의미 이상의 접근이 필요하다. 왜냐하면 경량전철은 다양한 시스템이 내재된 복합구조의 시스템이기 때문이다. 따라서, 역사의 슬림화를 추구하면서 열차무인운행에 대한 안전성까지 확보하기 위해서는 시스템 설계에서 체계적인 접근이 필요하다. 특히, 경전철 역사에 대한 설계지침 및 관련법이 국내에 현재까지는 없는 실정이다. 이러한 문제점을 해결하기 위해 본 연구에서는 역사 기능실의 소형화에 대한 연구를 수행하였다. 구체적으로 설계구조행렬(DSM)의 개선된 기법을 제안하였으며, 이의 적용을 통해 역사 기능실 구조설계에서 구성품 통합에 의한 소형화 방법을 연구하였다. 본 연구에서 제안하는 기법을 기반으로 경전철 역사의 기능실 통합을 통한 슬림화 설계를 수행한다면, 향후 경전철역사 건설에서 상당한 시간, 공간, 예산 절감 등의 효과가 기대된다.

소비자 가치기반 디자인 평가 모형: 제품 속성, 인지 속성, 소비자 가치의 3단계 접근 (Design Evaluation Model Based on Consumer Values: Three-step Approach from Product Attributes, Perceived Attributes, to Consumer Values)

  • 김건우;박도형
    • 지능정보연구
    • /
    • 제23권4호
    • /
    • pp.57-76
    • /
    • 2017
  • 최근 정보 기술의 발전 속도가 매우 빠르게 변화하고 있다. 스마트폰과 태블릿 같은 IT 기기에서 이런 변화들이 두드러지고 있다. 이전의 IT 기기들은 기능상의 혁신과 진보를 통해 소비자들을 끌어들였지만, 현재는 IT 제품 상에서 기능상 발전과 혁신은 둔화되었다. 기능상 차별점이 줄어든 시점에서 기업들은 외관과 디자인적 측면에서 차별화를 시도하고 있다. 스마트폰의 외관적 변화를 반영하듯 소비자들도 성능보단 디자인을 스마트폰 구매의 중요 요인으로 삼고 있다. 스마트폰은 패션 아이템의 하나로 자리매김하게 되었고, 스마트폰의 디자인과 외형이 지속적으로 중요해짐에 따라 해당 제품에 대해 소비자들이 느끼는 디자인 가치가 무엇인지도 중요해졌으며, 무엇에 영향을 받는지도 중요해졌다. 소비자들이 느끼는 가치가 중요해짐에 따라 소비자들이 해당제품의 디자인에 대해 평가하는 메커니즘을 밝힐 필요성이 존재하며, 적절한 가치를 전달하기 위해 디자인을 평가할 수 있는 모형이 필요하다. 디자인과 관련한 기존 연구들은 소비자들의 인지와 가치 부분에 초점을 맞추어 연구를 하였지만, 제품 속성 자체에 대한 부분은 고려하지 않은 경향이 있으며, 제품이 갖고 있는 객관적인 속성들에 따라 소비자들의 인지가 변화하는 과정과 최종적으로 느끼는 가치에 대한 메커니즘을 밝힌 연구는 부재한 것으로 나타났다. 따라서 본 연구는 스마트폰 제품이 갖고 있는 객관적 속성인 제품 속성과 객관적 속성을 통해 느끼는 소비자들의 인지, 가치에 대해 평가할 수 있는 메커니즘을 설계하고, 이를 평가할 수 있는 3단계 디자인 평가 모형을 제시하려 한다. 3단계 디자인 평가 모형은 제품 속성, 인지 속성, 소비자 가치까지 모든 단계를 고려한 정량화된 모형으로 스마트폰 분야만이 아닌 사용자경험 분야에 전반적으로 적용 가능할 것으로 기대하며, 기업이 갖고 있는 소비자 데이터와 결합한다면, 특정 소비자층을 겨냥한 제품 생산 및 설계가 가능한 지능형 디자인 가치 평가 모형으로 발전할 수 있을 것으로 예상한다.