• Journal of Korea Water Resources Association
• /
• v.34 no.1
• /
• pp.31-43
• /
• 2001

The friction factor of commercial pipe varies with wide range depending on pipe type and pipe size. Various methods can describe the wide variation of friction factor with good accuracy, but they normally require an iteration process even for solution of a simple case. Power law can result in an explicit form of solver so that the power law is rigorously employed for the development of direct solution technique. The parameters used in the present form of power law are allowed to haute some variation with pipe size and Reynolds number as well as pipe type for wider coverage with good accuracy, while Hazen-Williams equation permits limited variation which accounts only for the roughness or the pipe type. Furthermore secondary loss is considered in the development of explicit equations for design of commercial pipes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.1
• /
• pp.28-35
• /
• 2014

In this paper, we propose a SSD(simultaneous single band duplex) system with turbo equalizer for full-duplex over harsh ISI(inter symbol interference) channel. The proposed system uses RF(radio frequency) cancellation and digital cancellation to cancel self-interference caused by simultaneous single band duplex communication. Also, using turbo equalizer, the proposed system equalizes signal after digital cancellation. In this paper, we design SSD system with turbo equalizer. And then we evaluate BER(bit error rate) performance of the proposed system comparison with SSD system with adaptive equalizer. We use simulink program to confirm BER performance of the proposed system. The simulation results shows that the proposed system equalizes received signal effectively over harsh ISI channel and BER performance of the proposed system is better than BER performance of SSD system with adaptive equalizer.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.2
• /
• pp.67-78
• /
• 1990

An inverse self-iterative procedure is developed to determine layer moduli which are significant for the structural evaluation of pavements in developing rational and analytical rehabilitation technique. Falling weight deflectometer(FWD) is adopted as a non-destructive testing(NDT)device. The layer elastic theory is used to interpret NDT data. The theoretical deflection basins of pavement structures obtained by full factorial design are used for a parametric study on the characteristics of deflection basins and regression analyses. Regression equations to estimate layer moduli of flexible pavements are proposed through the regression analyses of theoretical deflection basins. The relationships between the rate of change of moduli and deflections are developed for the efficient iteration. An inverse self-iterative procedure to ensure the accuracy of the layer moduli is proposed. Validity and applicability of the developed procedure are verified through various numerical model tests.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.2
• /
• pp.1-15
• /
• 1986

The algorithm Proposed utilizes the two-levels technique. In the first level which consists of two phases, the cross-sectional area of the truss member is optimized by transforming the nonlinear problem into SUMT, and solving SUMT utilizing the modified Newton-Rahson method. In the second level, the geometric shape is optimized utilizing the unindirectional search technique of the Powell method which make it possible to minimize only the objective function. The algorithm Proposed in this study is numerically tested for several truss structures with various shapes, loading conditions and design criteria, and compared with the results of the other algorithms to examine its applicability and stability. The numerical comparisons show that the two-Levels algorithm Proposed in this study is safely applicable to any design criteria, and the convergency rate is relathely fast and stable compared with other iteration methods for the geometric optimization of truss structures.

• Journal of Communications and Networks
• /
• v.13 no.5
• /
• pp.481-493
• /
• 2011

Multiple-input multiple-output (MIMO) technology provides high data rate and enhanced quality of service for wireless communications. Since the benefits from MIMO result in a heavy computational load in detectors, the design of low-complexity suboptimum receivers is currently an active area of research. Lattice-reduction-aided detection (LRAD) has been shown to be an effective low-complexity method with near-maximum-likelihood performance. In this paper, we advocate the use of systolic array architectures for MIMO receivers, and in particular we exhibit one of them based on LRAD. The "Lenstra-Lenstra-Lov$\acute{a}$sz (LLL) lattice reduction algorithm" and the ensuing linear detections or successive spatial-interference cancellations can be located in the same array, which is considerably hardware-efficient. Since the conventional form of the LLL algorithm is not immediately suitable for parallel processing, two modified LLL algorithms are considered here for the systolic array. LLL algorithm with full-size reduction-LLL is one of the versions more suitable for parallel processing. Another variant is the all-swap lattice-reduction (ASLR) algorithm for complex-valued lattices, which processes all lattice basis vectors simultaneously within one iteration. Our novel systolic array can operate both algorithms with different external logic controls. In order to simplify the systolic array design, we replace the Lov$\acute{a}$sz condition in the definition of LLL-reduced lattice with the looser Siegel condition. Simulation results show that for LR-aided linear detections, the bit-error-rate performance is still maintained with this relaxation. Comparisons between the two algorithms in terms of bit-error-rate performance, and average field-programmable gate array processing time in the systolic array are made, which shows that ASLR is a better choice for a systolic architecture, especially for systems with a large number of antennas.

• Wind and Structures
• /
• v.29 no.4
• /
• pp.247-270
• /
• 2019

Wind-resistant design of existing cooling tower structures overlooks the impacts of rainfall. However, rainstorm will influence aerodynamic force on the tower surface directly. Under this circumstance, the structural response of the super-large cooling tower (SLCT) will become more complicated, and then the stability and safety of SLCT will receive significant impact. In this paper, surrounding wind fields of the world highest (210 m) cooling tower in Northwest China underthree typical wind velocities were simulated based on the wind-rain two-way coupling algorithm. Next, wind-rain coupling synchronous iteration calculations were conducted under 9 different wind speed-rainfall intensity combinations by adding the discrete phase model (DPM). On this basis, the influencing laws of different wind speed-rainfall intensity combinations on wind-driving rain, adhesive force of rain drops and rain pressure coefficients were discussed. The acting mechanisms of speed line, turbulence energy strength as well as running speed and trajectory of rain drops on structural surface in the wind-rain coupling field were disclosed. Moreover, the fitting formula of wind-rain coupling equivalent pressure coefficient of the cooling tower was proposed. A systematic contrast analysis on its 3D distribution pattern was carried out. Finally, coupling model of SLCT under different working conditions was constructed by combining the finite element method. Structural response, buckling stability and local stability of SLCT under different wind velocities and wind speed-rainfall intensity combinations were compared and analyzed. Major research conclusions can provide references to determine loads of similar SLCT accurately under extremely complicated working conditions.

• Journal of Internet Computing and Services
• /
• v.9 no.1
• /
• pp.115-127
• /
• 2008

The component for satisfying several domain requirements must be developed to support variety. But, when the application is developed using the component, it happens other requirements. So, it is difficult to design component to satisfy severaldomain requirements. Also, it is impossible to support the special business logic. As this problem, the component must provide to the white-box component, it is not the black-box component. So, in this paper, we propose the variability design technique and the customization technique using the design technique that can support the various requirements. This technique is not focus on designing the component to analyze various domains. The variability of the component is designed to the initial variability in the component development phase and we use the customization technique for applying the variability to developing application. The variability can be re-designed during developing the application to use the component applying the variability. The variability of the component is evolved and the generation of the component is increased via the iteration Generally, the range of the component variability is classified the function modification within the component and the component internal structure modification as requirements in the component outside. As the range of the variability, we propose the variability design technique of the behavior and the message flow. This paper proposes a message flow design technique for modifying function call.

• Journal of the Korea Convergence Society
• /
• v.12 no.5
• /
• pp.127-138
• /
• 2021

The aim of this study is to demonstrate interaction as a describable field and tries to understand interaction from the perspective of attributes, thus building a theoretical to help interactive designer understand this field by common rule, rather than waste huge time and labor cost on iteration. Since the concept of interaction language has been brought out in 2000, there are varies of related academical studies, but all with defect such as proposed theoretical models are built on a non-uniform scale, or the analyzing perspective are mainly based on researcher's personal experience and being too unobjective. The value of this study is the clustered resource of research which mainly based on academical review. It collected 21 papers researched on interaction paradigm or interaction attributes published since 2000, extracting 19 interaction attribute models which contains 174 interaction attributes. Furthermore, these 174 attributes were re-clustered based on a more unified standard scale, and the two theoretical models summarized from it are respectively focuses on interaction control and interaction experience, both of which covered 6 independent attributes. The propose of this theoretical models and the analyzation of the cluster static will contribute on further revealing of the importance of interaction attribute, or the attention interaction attribute has been paid on. Also, in this regard, the interactive designer could reasonably allocate their energy during design process, and the future potential on various direction of interaction design could be discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6A
• /
• pp.405-419
• /
• 2012

In this paper, we propose a joint base station(BS) and relay precoders design in multi-relay aided multi-user all-multiple-input multiple-output(MIMO) system. The design criterion is to minimize user sum mean square error(SMSE) with relay sum power constraint(RSPC) where only local channel state information(CSI)s are available at relays. Local CSI at a relay is defined as the CSI of the channel which the relay itself accesses, out of among all the 1st hop and the 2nd hop channel in the system. With BS precoder structure which is concatenated with block diagonalization(BD) precoder, each relay can determine its own precoder using only local CSI. Proposed scheme is based on sequential iteration of two stages; stage 1 determines BS precoder and relay precoders jointly with SMSE duality, and stage 2 determines user receivers. Proposed scheme can be demonstrated theoretically to be always converge. We verify that proposed scheme outperforms simple amplify-and-forward(SAF), MMSE relay, and proposed schemes in [1] in terms of both SMSE and sum-rate performances.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.6 s.360
• /
• pp.42-49
• /
• 2007

CABAC(Context-based Adaptive Binary Arithmetic Coding) among various entropy coding schemes which are used to improve compression efficiency in H.264/AVC has a high hardware complexity and the fast calculation is difficult because data dependancy exists in the bit-serial process. In this paper, the proposed architecture efficiently compose the renormalization process of binary arithmetic encoder which is an important part of CABAC used in H.264/AVC. At every clock cycle, the input symbol is encoded regardless of the iteration of the renormalization process for every input symbol. Also, the proposed architecture can deal with the bitsOutstanding up to 127 which is adopted to handle the carry generation problem and encode input symbol without stall. The proposed architecture with three-stage pipeline has been synthesized using the 0.18um Dongbu-Anam standard cell library and can be operated at 290MHz.