• Korean Journal of Optics and Photonics
• /
• v.11 no.2
• /
• pp.73-79
• /
• 2000

We measure a beam diameter of scan and sub-scan direction of LSD (Laser Scanning Urnt) which uses $fheta$ lens produced by injecLion molding method as a scanning lens. While the measured beam diameter in scan direction, which is $62muextrm{m}$ to $68\mu\textrm{m}$, shows similar size comparing to the design beam diameter, the sub-scan beam diameter shows sIzable beam diameter deviation as much as 37 11m ranging from $78\mu\textrm{m}$ to $115\mu\textrm{m}$. Injection molding lens has the surface figure error due to the shrinkage III the cooling time and the internal distortion (birefringence) due to the uneven cooling conditIOn so that these bring about wavefront aberration (i.e., the enlargement of beam size), and are eventually expre~sed as the deterioration of the pdnting image. In this paper. we first measure and analyze beam diameter, birefringence (polanzation ratio), and asphedcal figure error of mIens in order to know the principle cause of the beam diameter deviation in sub-scan directIOn. And Lhen. through the analysis of a designed depth of focus and a calculated field curvature (imaging position of the optical axis directIon) using the above figure elTor data, we know Lhat the birefringence IS the main factor of sizable beam diameter deVIation in sub-scan direction. ction.

• The Journal of Korean Physical Therapy
• /
• v.15 no.1
• /
• pp.61-81
• /
• 2003

There can be little dissension that the ultimate goal of all physical therapy interventions with the elderly is to restore or maintain the highest level of function possible for the individual. Whenever physical therapists take on this challenge, they assist elders in maintaining their identities as competent adults. Advancing age is associated with profound changes in body composition, including increased fat mass, decreased fat-free mass(particularly muscle), decreased total body water and decreased bone density. Along with these changes in body compositions, and perhaps as a direct result of them, elderly people have lower energy needs, reduced strength and functional capacity and a greatly increased risk for such diseases as noninsulin-dependent diabetes mellitus and osteoporosis. Resistance training is considered a promising intervention for reversing the loss of muscle function and the deterioration of muscle structure that is associated with advanced age. This reversal is thought to result in improvements in functional abilities and health status in the elderly by increasing muscle mass, strength and power and by increasing bone mineral density. In the past couple of decades, many studies have examined the effects of Resistance training on risk factors for age-related diseases or disabilities. We have explored the positive and negative aspects of older adults' participation in resistance training programs. The benefits to older adults are reported to be increased strength, endurance, muscle capacity, and flexibility; more energy; and improved self-image and confidence. The negative aspects include some pain or stiffness and other nonspecific problems. The positive and negative aspects of resistance training are therefore very similar to those in younger populations. Scientific investigations over the past 10 years have demonstrated that resistance training can be safely and successfully implemented in older populations. Even the frail and very sick elderly can benefit and improve their quality of life. Proper design and progression of a resistance training program for older adults is vital to optimal benefits from resistance exercise. The results of data provided by this research on resistance training for health shows that there is enough existing evidence to conclude that resistance training, particularly when incorporated into a comprehensive fitness program, can offer substantial health benefits which can be obtained by persons of all ages. These benefits, including improvements in functional capacity, translate into an improved quality of life.

• Journal of Distribution Science
• /
• v.13 no.1
• /
• pp.93-103
• /
• 2015

Purpose - This study plans to adopt a more sophisticated approach toward service recognition by customers in general supermarkets in order to revise the service quality measurement methods that suit the context of Korean distribution channels. In particular, in general supermarkets, where much of the shopping process is in the form of self-service, there is high reliance on the service recognized by the consumers; therefore, it is highly likely that consumers would make their purchasing decisions based on their recognition of service quality or guarantees. It also utilized service quality elements of a basic level in the KD-SQS development model in order to indicate that the quality recognized by consumers impacts their loyalty to the stores with financial value and abstract value. Research design, data, and methodology - The study suggested a theoretical model comprising 13 hypotheses on relations between theoretic variables, and conducted surveys with consumers using discount stores in Seoul and Gyunggi Metropolitan area in order to verify the hypotheses, while using SPSS 20.0, AMOS 21.0 as the verification program. The survey sheets used amounted to 332, and a structural equation model was used to analyze the reliability and validity of constituent elements and to verify the suggested hypothesis. Therefore, this study analyzes the interrelations between service quality and guarantee factors in the distribution channel and their relations with the loyalty to stores as a dependent variable. Results - First, the results of the hypotheses tests helped identify the relations between service quality, service guarantees, service value, and customer loyalty, providing an opportunity to define the relations between constituent elements. In particular, service convenience in service quality has no impact on financial values. Further, stores' service policy had no impact on abstract values. Service recognition by service convenience has an impact on abstract values such as good image, comfort, and usability, while mileage systems promote financial values for consumers. In order to improve consumer values in service quality and values, general supermarkets should improve their service convenience, membership, and mileage programs using various strategies. Conclusion - In order to improve consumer values in service quality and values, general supermarkets should improve their service convenience, membership, and mileage programs using various strategies. Further, as service guarantee systems have a significant and direct impact on customer loyalty, rather than customer value recognition, service guarantees should be used to encourage customers to re-visit the stores. Finally, this study applied the findings of preceding studies in terms of service quality measurement; it had limitations in referencing preceding studies in a comprehensive manner. It also had limits in expanding upon various preceding studies because it was difficult to apply new measurement tools due to the lack of service quality measurement tools for general supermarkets. Therefore, it is necessary to conduct more studies on service quality to measure service quality and develop measurement tools by incorporating various industry characteristics.

• Journal of Distribution Science
• /
• v.12 no.8
• /
• pp.17-29
• /
• 2014

Purpose - The use of corporate social activities to implement the concept of corporate social responsibility enhances brand equity and attitude, and strengthens economic competitiveness. In areas such as mobile communications, companies take the responsibility of protecting customers and enhance the quality of the mobile communication service, helping to make an effort to obey the regulations of the public trade order and fair trade agreement, enabling a healthy society through communication with elderly living alone or youths without parents, and enhancing marketing strategies. Research design, data, and methodology - To test the hypothesis, a survey was conducted. The surveyed population includes people who use the big three mobile communication services. The survey was conducted from October 4th to October 14th, 2013. A total of 500 survey questionnaires were circulated and 483 were collected; out of these, 32 were excluded due to missing or incomprehensible information. The data was analyzed with SPSS 18.0 via frequency analysis, trust analysis, search factor analysis, relationship analysis, confirmation factor analysis using AMOS 18.0, and structural equation model analysis. Results - Research on corporate social responsibility has been frequently conducted recently. Companies are perceived as social constituents satisfying the social desires of people in addition to customer needs. Further, companies are returning profits to society to satisfy community needs, because there is greater emphasis on the social responsibilities of companies. Companies' social responsibilities should include marketing strategies and the identification of customer needs. This study shows that social service activities influence brand value, which influences customer attitudes; therefore, social service activities indirectly influence customer attitudes. In order to increase customers' purchasing intention, it is essential to improve brand image via social services and provide a distinctive quality of service. Conclusions - This research has used the purposive selection method in the empirical analysis to identify the effect of social services on brand value and customer attitude. Therefore, this study revealed that businesses, whose ultimate objective is to improve customers' purchasing intention, should promote their brand equity through corporate social responsibility activities and offer a distinct service quality. Limitations in the progress of research were found and future indications to overcome these limitations are suggested as follows. First, survey responders had a limited understanding of social responsibilities; therefore, this concept needs to be explained to people first. Second, the research was done on people who live in Daejeon; thus, it is not representative of the entire country. The research has to be repeated with people in other cities. Third, there is a limitation in the study because the purposive selection method was used on Daejeon customers. In the future, a more precise selection of the population is needed. Fourth, Daejeon has unique geographical and size characteristics. Thus, customers in Seoul and other areas may display different characteristics and research on them may reveal different findings. Therefore, again, this study has to be repeated in other areas.

• Journal of Korean Home Economics Education Association
• /
• v.20 no.3
• /
• pp.201-213
• /
• 2008

This study was intended to examine the relationship between lifestyle and school uniform design modification in high school girls and provide basic data for guidance in the wearing of school uniform. The subjects of this study were 585 girls who were in the first and second grades of high schools throughout Gwangju. This study was executed using a questionnaire. The data from this study was processed using SPSS WIN 12.0(Kr). The results were as follows; This study hypothesized that the perception and attitude on school uniform modification would be significantly difference depending on lifestyles in high school girls. The significant differences appeared in a few items. So the results suggested that school uniform modification was a common that appeared in most high school girls. However it was affected by their lifestyle. specifically, a digital-dependence lifestyle group has a few different perceptions and attitudes on school uniform modification than the others. In other words, school uniform modification in high school girls who spend their most time in school is a general and universal clothing behavior by psychological factors rather than the effect of lifestyle. It is considered that rules concerning school uniform modification should allow students to express their individuality within certain limits. Teachers should instruct students to wear appropriate underwear rather than keep students under control with a fixed set of rules. If High school girls have a negative body image as a result of their exposed body, they should receive active educational guidance.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2015

This paper introduces the development of imaging luminance meter which measures the luminances of external/internal road tunnel. The developed imaging luminance meter complies with both L20 method and Veiling luminance method of the international standards, CIE88. In this paper the L20 method is mainly presented because most of tunnels currently adapt L20 method. The developed system has an embedded computer to operate at stand-alone. The system has a ethernet port, a heater, a fan, a defroster, a wiper and sun shielder. Compensation algorithm is applied for correcting non-linear responses to the luminance and integration time. The accuracy of measurement is less than 1% when it calibrated at the public certification institute. The developed system was also tested at the real field, road tunnel. The test results were very similar with the reference luminance meter and showed that the developed system operates well at the real field. Partial sensor saturations were happened to show the less luminance, because there were the high reflecting objects in the real field. Further study should be followed for high luminance measurement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1227-1234
• /
• 2008

In this paper is designed a 256-bit synchronous OTP(one-time programmable) memory required in application fields such as automobile appliance power ICs, display ICs, and CMOS image sensors. A 256-bit synchronous memory cell consists of NMOS capacitor as antifuse and access transistor without a high-voltage blocking transistor. A gate bias voltage circuit for the additional blocking transistor is removed since logic supply voltage VDD(=1.5V) and external program voltage VPPE(=5.5V) are used instead of conventional three supply voltages. And loading current of cell to be programmed increases according to RON(on resistance) of the antifuse and process variation in case of the voltage driving without current constraint in programming. Therefore, there is a problem that program voltage can be increased relatively due to resistive voltage drop on supply voltage VPP. And so loading current can be made to flow constantly by using the current driving method instead of the voltage driving counterpart in programming. Therefore, program voltage VPP can be lowered from 5.9V to 5.5V when measurement is done on the manufactured wafer. And the sens amplifier circuit is simplified by using the sens amplifier of clocked inverter type instead of the conventional current sent amplifier. The synchronous OTP of 256 bits is designed with Magnachip $0.13{\mu}m$ CMOS process. The layout area if $298.4{\times}314{\mu}m2$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1456-1464
• /
• 2007

The research of skin-tone detection has been conducting continuously to enlarge the importance in security, surveillance and administration of the information and 'Password Control System' for using face and skin recognition in airports, harbors and general companies. As well as tile rapid diffusion of the application range in image communications and an electron transaction using wide range of communication network, the importance of the accurate detection of skin color has been augmenting recently. In this paper, it will set up the boundaries of skin colors using the information of Cb and Cr in YCbCr color model of human skin color which is from hundreds compiled portrait images for each race, and suggest a efficient yet simple structure about the skin detection which has been followed by whether the comprehension of the boundaries of skin or not with adaptive skin-range set. With the possibility of the 1D Processes which does not use any memory, it is able to be applied to relatively small-sized hardware and system such as mobile apparatuses. To add the selective mode, it is not only available the improvement of tie skin detection, but also showing the correspondent results about previous face recognition technologies using complicated algorithm.

• Journal of Broadcast Engineering
• /
• v.24 no.5
• /
• pp.849-858
• /
• 2019

Recent developments in computer graphics technology and image processing technology have increased interest in point cloud technology for inputting real space and object information as three-dimensional data. In particular, point cloud technology can accurately provide spatial information, and has attracted a great deal of interest in the field of autonomous vehicles and AR (Augmented Reality)/VR (Virtual Reality). However, in order to provide users with 3D point cloud contents that require more data than conventional 2D images, various technology developments are required. In order to solve these problems, an international standardization organization, MPEG(Moving Picture Experts Group), is in the process of discussing efficient compression and transmission schemes. In this paper, we provide a region division transfer method of 3D point cloud content through extension of existing MPEG-DASH (Dynamic Adaptive Streaming over HTTP)-SRD (Spatial Relationship Description) technology, quality parameters are further defined in the signaling message so that the quality parameters can be selectively determined according to the user's request. We also design a verification platform for ROUTE (Real Time Object Delivery Over Unidirectional Transport)/DASH based heterogeneous network environment and use the results to validate the proposed technology.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.1
• /
• pp.153-161
• /
• 2015

In this paper, we propose a locomotor evaluation System for mouse based on continuous shooting images. In the field of veterinary medicine and animal studies are subjected to using the mouse for the quality of human life. In particular, during the experiments using the artificially created mice injury, through a variety of scoring and a lot of experiments to measure the extent of recovery from the injury. The traditional method of measuring the quantity of exercise while in this experiment was made of a method for directly observing person. The proposed system performs the continuous shooting per unit of time specified by the movement of the mouse is extracted from a continuous image shooting with the outline of a mouse point cloud. And using the extracted point cloud to extract again the inner contour of the body of the mouse. So using the new point cloud obtained its center, Then, using the center point calculated by accumulating the distance between two points on locomotor evaluation system design and implement to obtain the total distance the mouse moves over a unit of time.