• Composites Research
• /
• v.35 no.1
• /
• pp.31-37
• /
• 2022

In this study, an optimal structural design framework has been developed for the structural design of composite helicopter blades. The optimal design framework is constructed using PSGA (Particle Swarm assisted Genetic Algorithm), which combines the genetic algorithm and particle swarm optimizer. The optimization process consists of a finite element (FE) modeling over the blade section, two-dimensional (2D) cross-sectional FE analysis, and 1D rotating blade analysis. In the design process, the geometric curves and surfaces are formed using the B-spline scheme while discretizing the sections via a FE mesh generation program Gmsh. The blade cross-sections are created in accordance with the design variables when performing the blade structural analysis. The proposed optimization design framework is applied to a modernization of the HART II (Higher-harmonic Aeroacoustics Rotor Test II) blades. It is demonstrated that an improved blade design is reached through the current optimization framework with the satisfaction of all design requirements set for the study.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.2
• /
• pp.189-202
• /
• 2009

As naval ships become more complex with the reduced cost and time for their development, modeling and simulation are increasingly used. The US navy has being applied the concept of a simulation-based acquisition(SBA) to their acquisition process. However, there have been few studies on a simulation-based acquisition for naval ships (SBA-NS) in the Korean naval shipbuilding. In this paper, we discuss a framework to establish collaborative environment(CE) for an advanced naval ships acquisition based on PLM. For this, we propose architectures and a naval ship information model for design the framework of the SBA-NS. To design the framework, we develop the methodology that is composed of three major processes that are the requirement analysis process, the SBA-NS architectures design process and the design process of a reference model of a naval ship product information. Applying the methodology, the framework suitable for the Korean Navy context is developed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.6
• /
• pp.661-669
• /
• 2018

Engineering system problems consist of multi-objective optimisation and the performance analysis is generally time consuming. To optimise the system concerning its performance, many researchers perform the optimisation using an approximation model. The Response Surface Method (RSM) is usually used to predict the system performance in many research fields, but it shows prediction errors for highly nonlinear problems. To create an appropriate metamodel for marine systems, Lee (2015) compares the prediction accuracy of the approximation model, and multi-objective optimal design framework is proposed based on a confirmed approximation model. The proposed framework is composed of three parts: definition of geometry, generation of approximation model, and optimisation. The major objective of this paper is to confirm the applicability/usability of the proposed optimal design framework and evaluate the prediction accuracy based on sensitivity analysis. We have evaluated the proposed framework applicability in derrick structure optimisation considering its structural performance.

• Journal of the Korean Society of Earth Science Education
• /
• v.13 no.1
• /
• pp.121-133
• /
• 2020

This study proposes a lesson design framework to design a science and engineering integrated lesson in a meaningful and easy way based on engineering design, which is the core feature of STEM education. The science and engineering integrated lesson design framework is developed based on the analysis of domestic and foreign theoretical and practical research papers and expert discussion on science and engineering integrated education as well as the feedbacks from science teachers. The science and engineering integrated lesson design framework uses engineering design as the main pedagogical method. The framework includes the core elements of the engineering integrated lesson suggested in previous studies and the achievement level of each grade group suggested in NGSS and provides a way for teachers to easily introduce engineering design into science classes. In addition, the framework developed in this study complements the shortcomings of the complicated Korean STEAM education framework. It can also provide specific guidance to in-service teachers as well as pre-service teachers to easily understand and apply engineering design and problem solving processes to science and engineering integrated lessons.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.4
• /
• pp.308-320
• /
• 2007

A multi-agent and web based engineering framework concerning the automation of fatigue durability analysis for welded bogie frame of railway vehicles is presented. Mostly, this kind of design or analysis includes complex workflow, huge amounts of information processing, and problem solving. Macro programs of I-DEAS, APDL of ANSYS, and in-house fatigue code are utilized for parametric geometry representation, automatic mesh generation, static stress analysis, fatigue durability analysis, post-processing, and data sorting. The engineering framework is implemented on the JADE. Since every task requires a fairly complex process and specialized knowledge, the multi-agent based framework is very useful to keep the independency among several disciplines or tasks and to use distributed hardware and software resources. All engineering programs are integrated by XML wrapper. Related database of the engineering framework and web based user interfaces are also developed. A parametric study is carried out to take into account the effect of geometrical change of transom support bracket on its cumulative fatigue damage. The developed engineering framework reduced remarkably the time and costs required in designing and solving engineering problems.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.730-731
• /
• 2015

This study aims at giving the framework to estimate the environmental load at planning and schematic phase. With increasing awareness of environmental issues, the effort to reduce the environmental impacts caused by human activity has been increasingly enlarged. So far most of researches estimating CO₂ emissions have analyzed energy consumption based on BOQ (Bills of Quantity) acquired after detailed design. There is also lack of reliability in the estimated environmental impact using the basic unit of a facility at the planning stage, because it uses a limited specific section of historical data. Thus, this study is targeted at developing framework to assess reliable environmental loads based on information available at project early phases by making case-bases from historical design information on PSC Beam Bridge. Historical database is built on the basis of the LCA (Life Cycle Assessment) and in order to set input information for estimating model, the literature about information in an early project phase are reviewed. Using the information available in the planning and schematic design stage, the Framework is presented to estimate the environmental load in an early stage in the project. Developing an environmental load estimation model in accordance with the Framework presented in this study, it is expected that the environmental load in the initial project phase can be estimated more quickly and accurately.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.4
• /
• pp.327-338
• /
• 1999

In this paper, we propose the framework of an integrated design system as a CAD system of a new concept that can incorporate the design information. Current CAD systems are powerful in representing the shape of a product with solid models but cannot provide the design information that is used or created in designing the product. Therefore an integrated design system is proposed to enable the storage and usage of the design information in addition to the shape manipulation. In order to represent the design information, we define element object that represents design element such as a part, a sub-assembly or an assembly by using object-oriented methodology. The element object carries various design information such as design parameters, documents, catalogues, functions, and behaviors as well as shapes. By using the stored information, the system can provide a designer with some functions to assist design activity such as interrogating necessary information, setting design parameters and goals, and constructing constraints among design elements. A mailing system is also constructed among element objects to assist a collaborative design. In addition, an evolutionary design method using genetic algorithms is realized within the proposed framework.

• Journal of the Korean Society for Library and Information Science
• /
• v.50 no.3
• /
• pp.171-191
• /
• 2016

The purpose of this study is to analyze the 'Framework for Information Literacy for Higher Education' filed by the ACRL (Association of College and Research Libraries) Board on February 2, 2015 and adopted on January 11, 2016. Six concepts central to information literacy in Framework and four main theories or models (i.e., threshold concepts, metaliteracy, Backward Design, and Liminal Space) underpinning the Framework were analyzed. The Framework provides conceptual or descriptive approach. In addition, the Framework is not designed to be implemented in a single information literacy session in a student's academic career. Instead, it is intended to be systematically integrated into the student's academic program at variety of levels. This study recommends curricular development and assessment methods supporting Framework as a further study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5252-5259
• /
• 2011

Both Optimization and Reuse Technology are considered as core technologies handling the values of products in embedded software. Framework technology is a typical type of optimization and reuse technology. When we develop software based on framework, The effect of reusability as well as development productivity can be improved. However, currently the form of framework-based development is very poor in embedded software development. Furthermore, because framework development is also beginning stage in embedded software development, there are questions whether developing framework can bring reusability effect. In this paper, we propose metrics measuring reusability of framework which is designed for improving reusability of embedded software. As as result of applying proposed metrics into real design cases, we can obtain more effective results in framework-based design than existing design.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.3
• /
• pp.110-117
• /
• 2012

A product family design has received much attention over the last several decades, since a product family-based development shortens lead-times and reduces cost, as well as increases efficiency and effectiveness of the product realization process. It is challenging work, however, to define the product family design in the heterogeneous product development environments, due to myriads of products related information described in different ways across products in any companies. In this paper, we provided a way of defining product family design framework using formal concept analysis and ontology language. Based on this, the specific product family can be derived by ontological reasoning, and the new product concept can be also expanded in the framework. The proposed framework is formalized using OWL (Web Ontology Language) and implemented in $Prot{\acute{e}}g{\acute{e}}$. Actual product family design algorithm is carried out using FaCT++ engine, a plug-in to $Prot{\acute{e}}g{\acute{e}}$, and the benefits of the proposed method are also demonstrated through a case study.