• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.555-556
• /
• 2014

In this paper, topology optimization of two-dimensional acoustic lenses is presented by using the phase field method. The objective of the optimization is to maximize the acoustic pressure at a specified domain inside the acoustic domain for a given frequency, and the constraint is imposed on the amount of the material of the acoustic lens. Topology optimization of two-dimensional acoustic lenses are obtained as the steady state of the phase transition described by the Allen-Cahn equation. The Helmholtz equation modeling the wave propagation is solved by using a finite element method. The effectiveness of the proposed method is verified by applying it for several two-dimensional acoustic lens system design problems.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.382-389
• /
• 2002

Recently, auger-drilled piling has been widely used in urban area to reduce the air pollution and noise. But this construction method that its basic theory was introduced from Japan may be changed depending on the each piling company and construction field condition. Therefore, the design code and management method for auger-drilled piling is not defined yet. Especially, the lack of research on the bearing capacity of auger-drilled piling leads to the absence of rational bearing capacity prediction equation. This paper presents the optimum design code and economical construction method of the auger-drilled piling by proposing the new bearing capacity prediction equation based on the site specific soil types and construction conditions. In this paper, existing bearing capacity prediction equations and current pile load tests were compared. And the end bearing capacity and skin friction characteristics were also analyzed by comparing the results of CAPWAP. From the results of analysis, a reliable bearing capacity prediction equation considered soil types is proposed.

• 대한건축학회논문집:구조계
• /
• 제34권12호
• /
• pp.21-26
• /
• 2018

For evaluating equations of bursting force in different codes, comparative study of the formulas was conducted. Because the equations does not consider variables such as shape of anchorages and duct, a relation between the bursting forces and the variables has to be analyzed. In this paper, the bursting forces equation was proposed by finite element analysis. As evaluation through comparison of the proposed equation with the previous ones and an experiment, it was figured out that bursting force computed by the proposed equation could be used for design of reinforcement in the anchorage zone.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.862-865
• /
• 2000

The object of this paper is to evaluate the surface roughness using the experimental equation of surface roughness, which is developed in turning by an orthogonal array method. $L_9{3^4}$ orthogonal array method, one of fractional factorial design has been used to study effects of main cutting parameters such as cutting speed, feed rate and depth of cut, on the surface roughness. And the analysis of variance (ANOVA)-test has been used to check the significance of cutting parameters. Using the result of ANOVA-test, the experimental equation of surface roughness, which consists of only significant cutting parameter - feed rate, has been developed. The coefficient of determination of this equation is 0.962.

• 한국정밀공학회지
• /
• 제2권3호
• /
• pp.70-76
• /
• 1985

A four-bar mechanism in consideration of the tolerances on link lengths and the clearances in joints is optimally designed by the method of stochastic analysis. The random nature of clearances and tolerances establishes a stochastic optimization design equation in which the parameters in the equation are described by random variables. In order to solve the design equation, the stochastic problem is converted into an equivalent deterministic one. The synthesis of four-bar mechanism for minimum mechanical and structural errors is carried out by the optimization techni- ques using Chebyshev spacing of precision points. By the results from the synthesized mechanism, the generated and desired motions are examined.

• 한국소음진동공학회논문집
• /
• 제21권6호
• /
• pp.491-498
• /
• 2011

The structural vibration due to earthquake or outside impact causes serious problem for building safety. A dynamic model of a friction damper which can be constructed and installed easily is needed to reduce the vibration of the building. In this paper, the experimental equation of a circular friction damper is derived and designed for reduction of a earthquake vibration of a building. The developed experimental equation is defined to simply design the capacity on design of the circular friction damper based on the results of the performance test. Finally this experimental equation can be used for the design of a circular friction damper.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.166-175
• /
• 1999

This paper describes a design and performance evaluation of robust controller which overrides unstable motion and pulls out quickly after water entry of underwater vehicle dropped from aircraft or surface ship. We use 6-DOF equation for model of motions and assume parameter uncertainty to reflect the difference of real motion from modelled motion equation. we represent a nonlinear system with uncertainty as Takagi and Sugeno's(T-S) fuzzy models and design controller stabilizing them. The fuzzy controller utilizes the concept of so-called parallel distributed compensation (PDC). Finally, we confirm stability and performance of the controller through computer simulation and hardware in the loop simulation (HILS).

• Journal of Mechanical Science and Technology
• /
• 제20권2호
• /
• pp.177-184
• /
• 2006

An orbital design method of the formation initialization based on the relative orbital element method is presented. It firstly constructed the relative motion equation of the satellite formation flying in terms of the leader and followers' orbital elements. Then the equation was simplified when the orbit eccentricity of the leader satellite was small. And according to the satellites' mission, a general design method for the relative trajectory was proposed. The advantage of this method is that one can get a very simple analytical formula of each follower satellite's orbital elements when the orbital eccentricity of the leader satellite is zero. The simulation results show that the method is effective.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권3호
• /
• pp.131-137
• /
• 2010

개구부의 여러가지 형상을 고려한 축하중에 대한 철근 콘크리트 벽체의 극한 강도를 연구하기 위하여 12개의 1/3축소벽체 실험을 수행하고 분석하였다. 벽체실험은 기존의 설계식을 수정하기 위하여 구성되었다. 유효좌굴길이가 고려된 실험결과를 이용하여 새로운 실험식이 산출되었다. 이 새로운 설계식은 기존의 실험설계식과 비교하여 제안한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.869-872
• /
• 2005

This research studied robust design of column part for LCD transfer system. $1^{st}$ DOE(Design of Experiment)was conducted to find out main effect factors. 36 experiments were performed and their results were shows that the geometric parameters(Low-length, Side-length, Upper-thickness, Middle-thickness)are more important than other factors. The main effect plots shows that the maximum deflection of column is minimized with increasing Low-length, Side-length, under-thickness and Middle-thickness. $2^{nd}$ DOE was conducted to obtain RMS(Response Surface Method)equation 25 experiments were conducted. The CCD(Central Composite Design)technique with four factors were used. The coefficient of determination $(R^2)$ for the calculated RSM equation was 0.986. Optimum design was conducted using the RSM equation Multi-island genetic algorithm was used to optimum design. Optimum value for Low-length. Side-length, Upper-thickness and Middle-thickness were 299.8mm, 180.3mm, 21.7mm, 21.9mm respectively. An approximate value of 5.054mm in deflection was expected to be a maximum under the optimum conditions. Six sigma robust design was conducted to find out guideline for control range of design parameter. To acquire six sigma level reliability, the standard deviation of design parameter should be controlled within 2% of average design value.