• Journal of Welding and Joining
• /
• v.19 no.6
• /
• pp.652-657
• /
• 2001

To analyze and predict crack initiation position and propagation directions on the spot welded area are very important for strength design of the automobile body structure. It is necessary to test by method considering random loads with variable amplitude for strength design of vehicle body structure, because driving cars are actually subjected to random loads with variable amplitude in the road. Although this condition, nearly all tests haute been performed under constant load conditions in the laboratory because it is impossible to replay like an actual conditions. In this study, using in-plane bending type specimens, the overload factor affecting on the fatigue strength, crack initiation and propagation directions of spot-welded specimens have been studied.

• Journal of the Korean Statistical Society
• /
• v.24 no.2
• /
• pp.519-536
• /
• 1995

In the design of experiments for response surface analysis, sometimes it is of interest to estimate the difference of responses at two points. If differences at points close together are involved, the design that reliably estimates the slope of response surface is important. This idea was conceptualized by slope rotatability by Hader & Park (1978) and Park (1987). Until now, second order polynomial models were only studied for slope ratatability. In this paper, we will propose the necessary and sufficient conditions for slope rotatability over all directions for the thired order polynomial models in two, three and four independent variables. Also practical slope rotatable designs over all directions for two independent variables are suggested.

• Land and Housing Review
• /
• v.3 no.1
• /
• pp.45-58
• /
• 2012

This study aims to provide new design directions for public housing by analyzing trends in housing design. To this end, we investigate the changes in population, household, society, policy, institution, and technology as the main factors that can affect the housing design trends. Then we analyze the applications of public housing design and suggest the new design directions for public housing after considering experts' opinions. The low growth rate of population, growing separation of household members and increasing level of income produced more diverse demands from residents. In addition, housing demand is notably different by region, and the supply of medium and small-sized housing and small scale developments are growing. Information technology and green technology are also advancing. As a consequence, future housing trends would change from numerically-controlled to performance-based, from central to regional-oriented, from unit to city-centric. Current designs of public housing reflect recent housing trends- in reducing the number of housings and making view corridors by placing a central square in the middle. This shows that the existing designs are not differentiated by region and we need to develop various approaches according to location characteristics and the corresponding new housing types. Therefore, this study proposes the following five directions: responsiveness to demand changes, reflection of location characteristics, connectivity to a local community, realization of green environment, and acquisition of housing function.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2002.04a
• /
• pp.39-43
• /
• 2002

IMF situation in Korean society in 1997 gave huge shock to all areas, such as politics, economy, and society which were covered by bubble economy. It has passed 4 years since IMF but it is continued to increase of consumer price index and depression of the society. Receiving an order in interior design become more and more tense competition domestically as well as internationally, due to the open of WTO. In order to achieve economic design of low cost-high design which pursues the power of competition in cost and quality, this study investigated specific methods for economic design and suggested the directions for economic design in interior design field. To suggest the directions of future interior design for economic design with the analysis of domestic and international cases for economic design. the following results are showed: According to the analysis of the cases, economic design is accomplished with the use of the materials. Interior designers should consider how they can use materials for economic design. Especially, use of cheap materials gives the reduction of the cost and the effects of differentiation of the spaces more. Therefore, experimentalism and knowledge of materials are needed and they should be more weighted as the method for achieving economic design,

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.2
• /
• pp.33-44
• /
• 2006

The purpose of this study is to establish future directions of environmentally-friendly restoration of Yangjae underground stream and reflect various opinions of inhabitant in the plan and design process. The opinions from the citizens include the economic and environmental suitability of the restoration projects and preference for the future directions of restoration. The citizens are favorable to removing the existing parking lot and want to have jogging course, walking path and bike road in the stream. Different opinions and resulted in preferred facilities and diminishing existing park along the stream depending on the restoration influencing zone. As a result, citizens agree in restoration but they have different opinions about the feasibility of new facilities, streams restoration and central park reduction locally. It is desirable to reflect the opinions of citizens in the process of plan and design of restoration project.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.6
• /
• pp.627-636
• /
• 2018

This research was performed to supplement the previous research about the driving rain index (DRI) for Korea determined by using daily weather data for 30 years. The average annual driving rain index (AADRI) was calculated from the hourly weather data, and the magnitude of DRI was investigated according to wind directions. The hourly climate data were obtained from the Korea Meteorological Administration (KMA) for the period 2009 to 2017. Of 82 locations investigated, seven were classified into regions where the level of exposure of walls to rain was high. The result showed quite a difference from the previous results, in which no high exposure regions were observed. Since the hourly-based and the daily-based annual driving rain index (ADRI) values showed only a slight difference, the result may be explained by the length of the periods used in both studies. The change of DRI according to wind directions showed that there was a certain range of wind directions in which driving rain easily approached building walls. It suggests that the consideration of wind directions with high DRI would be useful to develop a good design of wooden buildings from the point of wood preservation and maintenance.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.5
• /
• pp.413-423
• /
• 2016

Objective:The aims of this study are to understand the effects of task (pushing, pulling, and clockwise and counter clockwise twisting) direction on the maximal output and their grip forces and to explore the relationship between the maximal output and the grip forces. Background: Knowing the normative maximal grip force is not enough to design a good hand tool. The industrial designers should understand the required grip forces in various motions toward a specific direction to make an effective and efficient hand tool. Method: Eighteen healthy volunteers participated in the series of isometric maximal output force tests. A custom-made force measuring equipment collected the output and the grip forces for three seconds. Force measurements along the vertical, coronal and sagittal axes were randomly repeated three times. Results: The pulling was strongest and the pushing was weakest in all directions. The effect of motion on the output forces varied in different directions. The corresponding grip force increased in the order of pushing, pulling, clockwise twisting, and counter clockwise twisting in all directions. The maximal output and their grip forces were highly correlated but the relationship was affected by motion and direction. The regression coefficient was greatest in pulling and smallest in clockwise twisting. Conclusion: The effect of motion on the output forces varied in different directions. The maximal output and their grip forces were correlated but the relationship was affected by motion and direction. Application: Findings of this study can be valuable information for industrial designers to develop more productive hand tools and work stations to help preventing the musculoskeletal disorders at work.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.4
• /
• pp.101-110
• /
• 2011

The change of digital convergence service environment converted the subject of design into user -centric one instead of developer-centric one, and changed the existing design environment focused on product development into the new user -centric design environment. Accordingly, GUI considering user's usability come to take big shares in those contents being used for multimedia equipments. However, as the present educational contents provide complex interface due to its design produced based on the existing e-learning system, they have many problems in that they don't consider user's usability. Thus this paper aimed to analyze actual examples through GUI elements of educational contents being used for multimedia equipments and attempt to suggest some directions for development. additionally, consider the various characteristics of digital convergence environment and educational contents, and try to set up strategic directions possible to utilize user'-centric interface elements more usefully and properly at the time to produce designs.

• Journal of Fashion Business
• /
• v.20 no.6
• /
• pp.135-147
• /
• 2016

Online supporters are the group of people selected by companies for the online promotion of their products or services and focus on generating messages that are conducive to stimulating hands-on experiences with companies' products and services to create advertising effects. This study examined how reviews offered by blogs operated by fashion brands' online supporters influence consumer's brand attitudes and purchase intentions. Specifically, this study examined how brand awareness and directions of review messages influences consumers' brand attitudes and purchase intentions. This study employed a 2 (brand awareness: high awareness vs. low awareness) ${\times}$ 3 (review direction: one-sided positive, two-sided positive & negative, one-sided negative) between-subject factorial design. In total, 180 respondents participated, thus garnering 30 responses for each of the six conditions. The results of two-way ANOVA revealed the significant main effect supporters' review message direction on consumers' brand attitudes and purchase intentions. Two-sided messages were rated high for brand attitude and purchase intention compared to one-sided positive or negative or positive directions. The interactions between brand reputation and message direction were significant for brand attitude, but not for purchase intention.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.04a
• /
• pp.59-63
• /
• 2007

With the recent increasing demand on the high-performance buildings, there has been a rapid growth in the application of the Computational Fluid Dynamics to the Building design. The conceptual ventilation design of the underground parking area currently under construction is validated using the CFD-ACE+. It has been found that the conceptual ventilation design quantitively satisfies the legal standards. However, the highly concentrated region of CO is predicted. The positions and blowing directions of ventilating lane are changed based on the previously predicted concentration distributions. The highly concentrated region of CO is slightly reduced, but not much change has been observed. Two more fang are installed and the positions and blowing directions of the fans are modified so that the highly concentrated region of CO is minimized.