• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1170-1175
• /
• 2009

When managers estimate exact construction cost at early stage and design phase, they can reduce construction cost in a more efficient way than to predict at construction stage. But, the current of public construction cost estimation and management is concentrated almost after detailed design phase. Therefore, construction cost management in design development phase to generally use approximate estimating is not correct. Also, the existing construction cost used the method that estimated by gross floor area-based cost estimates at design development phase. So, it is difficult to show the specific amount of materials and basis about the estimated cost of the construction. This study derived problems and limits of construction management at design development phase in case of public office building project through review of literature and current survey, and suggested estimating process model process of structural construction cost go improve these matters.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.6
• /
• pp.824-831
• /
• 2019

For effective development in consideration of the maintainability of the weapon system, it is necessary to understand whether the maintainability design requirements are satisfied at the early phase of development. This requires the application of an early design phase maintainability prediction process to provide opportunities for improvement. By defining the ambiguity group definition, fault isolation level, fault isolation probability, and countermeasures for faults, it was possible to predict early phase development. The MTTR of the initial design phase applying Procedure V to the artillery system was 3.46H, which is about 16 % higher than 2.98H, the MTTR using Procedure II. This is a result of system design ambiguity that has not been specified in the early phase of development.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.11a
• /
• pp.209-212
• /
• 2009

The Development of Cost Management is embossed efficiently to use the budget for the construction industry. The government is exploring every efforts and polices to control increasing the budget for the construction industry. However, despite of the government's efforts, researches are insufficient for a cost management of development. Also, the changed cost of construction by frequent plan change is caused of decline in quality etc during an accomplishing project. Therefore, in this study, analyzed about principal official phase of design phase to solve the problem. In order to define clearly the target cost concepts in the planning phase apply to the DTC(Design To Cost) concept and technique at the development of cost management process which will be able to manage the enterprise expense. It's process is expected with the fact that will be the possibility efficiently of fixing target cost in the planning phase by the construction client and designer.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.5
• /
• pp.684-696
• /
• 2018

The mission in missile systems can be conducted with multiple phases according to the characteristics of the systems and the targets. The safeguarded multi-phase mission includes a safeguarded phase before launch for considering the safety of operators in unexpected squib activation. However, the safeguard function should be disabled after launch to complete the mission. Therefore, the squib system needs to be selectively activated according to the phases. This paper presents a selective squib activation and check circuit design for safeguarded multi-phase missions in missile systems. The presented circuit design was implemented with various electronic components including a field-programmable gate array(FPGA). Its functions and performance were validated by both many ground tests and several flight tests.

• Journal of the Korean Society of Costume
• /
• v.55 no.4 s.94
• /
• pp.1-15
• /
• 2005

For every country, the flag is a major symbol that represents the country. Establishing image though the use of the country's symbol is more important for achieving national competitiveness in this global age. In Korea, Taekuki has not been actively applied to fashion products, however Korean people began to realize the Taekuki as a motif of fashion with 2002 World Cup. Thus, research on fashion product development applying Taekuki is needed. This research developed designs for fashion product development applying Taekuki. In addition, through suggesting various applied motives, this research explored the product possibility of global fashion design that represents Korean identity and fashion. For research method, after research on fashion design process, design development was progressed according to the 4-phases that comprehends processes previous researchers presented. First, in the problem recognition phase, background on the introduction of Taekuki to products and Taekuki fashion during 2002 World Cup was analyzed. Then, the need and possibility of fashion product development applying Taekuki's formative characteristics were found. Second, in research and analysis phase, meaning and history of Taekuki as well as flag fashion product developments in the U.S. and England examples were reviewed. Also, individual interviews with experts and consumers were conducted to collect qualitative data regarding product and design direction. Third, in idealization for problem solving phase, 62 designs including 43 apparels and 19 accessories were emerged. Finally, in evaluation phase, 40 university students majoring design evaluated designs' creativity, function, uniqueness, symbol, aesthetics, and harmony. Through this research, it is expected that fashion products applying Taekuki will be formly established as a fashion item. Furthermore, it is also expected that product development in other categories, brand planning, and product development using other national symbols such as name, anthem, and flower will be followed.

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.169-176
• /
• 2007

Recently, construction industry has been magnified while various cooperative relationship makes steady process. So importance of management during construction is gathering strength. Therefore, we need systematic management gradually. But almost management of construction industry that performs these day is focused on construction phase not design phase. The purpose of the present study is to find the effective way of design management with enhancing the process of design phase.

• Journal of the Korean Society of Systems Engineering
• /
• v.5 no.2
• /
• pp.1-9
• /
• 2009

This paper proposes an effective method on the DFILS(Design for Integrated Logistics Support) in ammunition development applying QFD(Quality Function Deployment) method. The goal of this research is to define the Design for ILS approach at the start of the ammunition development and to yield a set of reusable requirements. Based on 000mm High-Explosive(Warship ammunition) development work, a QFD software tool, CUPID, was used to analyze and define the field force's requirements. Additionally, a set of reusable requirements are identified and defined for use during the Design for ILS development phase in the next-generation ammunition development process. These set of requirements that consider both the priority and importance of the VOC(Voice of Customer) will contribute to the early phase of the ammunition development to implement the Design for ILS specialty engineering effort.

• Journal of Fisheries and Marine Sciences Education
• /
• v.24 no.1
• /
• pp.56-78
• /
• 2012

This study which is an alternative exploration for improving the quality level of instruction considering the perception of the teachers in early childhood education field on instructional design is to develop Differentiated Instructional Design Model coincides with the purpose of differentiated instruction curricula and with instructional design principles, and to find out whether the model has significant effect on development of teacher's professionalism. With these purposes, the perception of 343 teachers from early childhood education institutions are investigated, and after component variables are set by drawing the instructional design model available in early childhood education field and reviewing the literature of differentiated instruction model, the Differentiated Instructional design Model for Early Childhood are developed based on FGI(Focus Group Interview) expert evaluation. The experimental study of 88 teachers working in childcare facilities was implemented for effectiveness verification. As a result, first, most teachers consider the priority on making the lesson plans as the development of early childhood and Kindergarten Educational Subjects, and they realize the development of instructional design model which contributes on lesson planning and implementation is much needed. Second, the Differentiated Instructional design Model for Early Childhood are developed, which consists of the cyclic process - pre-lesson phase, lesson implementation phase, and assessment phase -based on development characteristics of early childhood. Third, the experiment of the developed model showed that the scores of experimental group is significantly higher than those of comparative group in knowledge and technique development aspect, and self-understanding development aspect among the aspects of development of teacher's professionalism.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.11
• /
• pp.87-96
• /
• 2012

This paper propose a development of surface permanent mount synchronous generator(SPMSG) for 5-phase 5Kw in order to study a polyphase ac machinery that keep hold of advantages more than traditional three-phase squirrel-cage induction motor, such as reducing a amplitude of torque pulsation decreasing electric noises, and increasing the reliability. Design methods of the generator use a development tools with Maxwell 2D and Simplorer. There are designed drawing of manufactured frames of the SPMSG. A amplitude and waveform of the generated electromotive force, FFT analysis of harmonics within output voltages, and reviewing a experiment results are shown by variable output frequency. We are presenting a design and manufacture methods for the SPMSG.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.531-534
• /
• 2007

In the current domestic design-build contract, design and construction are separated due to prohibition of outside work. but instead the design-build contract adopts a method of fulfilling each assignment as a joint venture, which makes it difficult for participants to communicate each other and often require changes of design. also, It is difficult to performance efficiency project that they don't want to share useful information related to design and construction. In this study suggests how to maxmize the effiency of the project by proposing a process model connected with an efficient partnering and constructability in a deign development phase of design-build constract.