• Asian Oncology Nursing
• /
• v.2 no.1
• /
• pp.50-60
• /
• 2002

Breast self-exam is easiest, safe and cost effective to be recommended as an important method for early detection of breast cancer. This experimental research with non-equal control design was to develop the efficacy expectation program for breast self-exam based on Bandura's self-efficacy information source. The study objects selected from two local churches in Busan. Twenty from S church were selected as a study group, twenty from D church as a control group. Efficacy expectation promoting program was based on Bandura's efficacy promoting source and was two hour lecture including slide, video tape, demonstration, pamphlet. After this, there were individual interviews with them and consultations through telephone f or verbal persuasion on the weekly basis between the first week and the fifth week. The effect from the experiment were measured on the first week after education and on the fifth week. Data from control group was collected during the period from Jan 11, 2 001 to Feb 15, 2001 and data from study group was collected during the period from Jan 12, 2001 to Feb 16, 2001. Measurement instrument for this study was developed by the author with the advice of specialist in order to measure self-efficacy and breast self-exam practice. Data analysis was done by using SPSS/10.0 PC program $with^2-$ test. t-test and ANCOVA. Proved results for hypothesis were as follows. 1) It was supported that "Study group educated by efficacy expectation promoting program has higher score in change rat e of self-efficacy than control group." (1 week after education F=18.395, p=.000 5 weeks after education F=28.972, p=.000) 2) It was supported that "Study group educated by efficacy expectation promoting program has higher score in change rate of exam practice than control group." (1 week after education F=37.984, p=.000 5 weeks after education F=28.972, p=.000) In conclusion, efficacy expectation promoting program for breast self-exam developed by this study may increase s elf-efficacy and breast self-exam practice.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.711-721
• /
• 2014

PPWS, a large number of which a main cable of a suspension bridge consists of, must be precisely erected at a target location under construction considering the differences among design conditions. The absolute sag is measured for several PPWSs, which are reference strands and the relative sag is surveyed from them to other PPWSs, which are divided into several groups. And the adjustment of PPWS length is performed to erect it at target configuration. When PPWS is being under erection in a real bridge site, the procedures are as follows; evaluate sag sensitivities according to sag variation factors, calculate an adjustment length of PPWS corresponding to them and adjust a sag of PPWS by controlling the calculated amount of PPWS length. In this study, the differential-related equations of sag sensitivity were proposed for support movement of PPWS. Before site demonstration study of a series of them, we established a catenary model system and accomplished verification tests of them. From test results, the validation of them was done.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.9
• /
• pp.1112-1124
• /
• 2011

The development of computer graphics and Internet technology has created a 3D Web-based virtual world that has transformed the global fashion industry environment. In this study, the application cases of 3D virtual fashion education were analyzed to discuss the necessity and application of a 3D apparel CAD curriculum as part of a special education for global fashion talent at Korean fashion-related colleges. Prior studies, literature, photo data and Internet data (in and out of Korea) were used for this study. The demonstration case studies were conducted for the virtual fashion education 'SLCC 2007' of Buffalo State College (U.S.), 'Ratava's Line (2004)' of SFU/FIT Collaborative Design Project (Canada and U.S.) and '2011 Graduation Fashion Show' of Ueda Fashion College (Japan). The results of the study show that the 3D apparel CAD system (as a core technology of the IT fashion industry) would allow the current mass production concept to change to a new paradigm of 'mass customization' along with new fashion business types that include global fashion companies and Web-based Internet, mobile and virtual-world shopping malls. In addition, it appears that the system should be included in the curriculum of fashion-related colleges and institutes to educate technical designers for the global fashion industry and global fashion talent with comprehensive system operation and management ability, and to promote single proprietor companies.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.491-491
• /
• 2011

Transparent and flexible electronic devices that are light-weight, unbreakable, low power consumption, optically transparent, and mechanical flexible possibly have great potential in new applications of digital gadgets. Potential applications include transparent displays, heads-up display, sensor, and artificial skin. Recent reports on transparent and flexible field-effect transistors (tf-FETs) have focused on improving mechanical properties, optical transmittance, and performances. Most of tf-FET devices were fabricated with transparent oxide semiconductors which mechanical flexibility is limited. And, there have been no reports of transparent and flexible all-organic tf-FETs fabricated with organic semiconductor channel, gate dielectric, gate electrode, source/drain electrode, and encapsulation for sensor applications. We present the first demonstration of transparent, flexible all-organic sensor based on multifunctional organic FETs with organic semiconductor channel, gate dielectric, and electrodes having a capability of sensing infrared (IR) radiation and mechanical strain. The key component of our device design is to integrate the poly(vinylidene fluoride-triflouroethylene) (P(VDF-TrFE) co-polymer directly into transparent and flexible OFETs as a multi-functional dielectric layer, which has both piezoelectric and pyroelectric properties. The P(VDF-TrFE) co-polumer gate dielectric has a high sensitivity to the wavelength regime over 800 nm. In particular, wavelength variations of P(VDF-TrFE) molecules coincide with wavelength range of IR radiation from human body (7000 nm ~14000 nm) so that the devices are highly sensitive with IR radiation of human body. Devices were examined by measuring IR light response at different powers. After that, we continued to measure IR response under various bending radius. AC (alternating current) gate biasing method was used to separate the response of direct pyroelectric gate dielectric and other electrical parameters such as mobility, capacitance, and contact resistance. Experiment results demonstrate that the tf-OTFT with high sensitivity to IR radiation can be applied for IR sensors.

• Journal of KIISE
• /
• v.43 no.2
• /
• pp.152-162
• /
• 2016

Most traditional garbage collectors commonly use the language level metadata, which is designed for pointer type searching. However, because it is difficult to use this metadata in non-volatile memory allocation platforms, a new garbage collection technique is essential for non-volatile memory utilization. In this paper, we design new metadata for managing information regarding non-volatile memory allocation called "Allocation Tree". This metadata is comprised of tree data structure for fast information lookup and a node that holds an allocation address and an object ID pair in key-value form. The Garbage Collector starts collecting when there are insufficient non-volatile memory spaces, and it compares user data and the allocation tree for garbage detection. We develop this algorithm in a persistent heap based non-volatile memory allocation platform called "HEAPO" for demonstration.

• Nuclear Engineering and Technology
• /
• v.45 no.5
• /
• pp.625-636
• /
• 2013

Pressing demands of economic competitiveness, the need for large-scale deployment, minimizing the need of human intervention, and experience from the past events and incidents at operating reactors have guided the evolution and innovations in reactor technologies. Indian innovative reactor 'AHWR' is a pressure-tube type natural circulation based boiling water reactor that is designed to meet such requirements, which essentially reflect the needs of next generation reactors. The reactor employs various passive features to prevent and mitigate accidental conditions, like a slightly negative void reactivity coefficient, passive poison injection to scram the reactor in event of failure of the wired shutdown systems, a large elevated pool of water as a heat sink inside the containment, passive decay heat removal based on natural circulation and passive valves, passive ECC injection, etc. It is designed to meet the fundamental safety requirements of safe shutdown, safe decay heat removal and confinement of activity with no impact in public domain, and hence, no need for emergency planning under all conceivable scenarios. This paper examines the role of the various passive safety systems in prevention and mitigation of severe plant conditions that may arise in event of multiple failures. For the purpose of demonstration of the effectiveness of its passive features, postulated scenarios on the lines of three major severe accidents in the history of nuclear power reactors are considered, namely; the Three Mile Island (TMI), Chernobyl and Fukushima accidents. Severe plant conditions along the lines of these scenarios are postulated to the extent conceivable in the reactor under consideration and analyzed using best estimate system thermal-hydraulics code RELAP5/Mod3.2. It is found that the various passive systems incorporated enable the reactor to tolerate the postulated accident conditions without causing severe plant conditions and core degradation.

• Journal of Korean Clinical Nursing Research
• /
• v.20 no.1
• /
• pp.28-39
• /
• 2014

Purpose: The purpose of this study was to investigate the effect of preoperative education about patient controlled analgesia (PCA) on postoperative pain control for elderly after total knee arthroplasty. Methods: The study applied a quasi-experimental design. To prevent communication between experimental group and control groups, data from control group were collected before provision of preoperative education for the experimental group. A total of 50 elderly patients who underwent total knee arthroplasty and older than 65 years old participated in this study. The preoperative education about PCA was provided for the experimental group before surgery. The preoperative education program consisted of fifteen minute education about pain control, and PCA use, as well as demonstration of PCA use. Results: The experimental group had higher knowledge score about pain and PCA use, and more positive attitudes toward pain and use of analgesics after surgery than the control group. There was no significant difference in use of additional analgesics after surgery between the two groups. The experimental group had significantly lower pain score at 8, 24 and 36 hours after surgery than the control group. The experimental group had higher level of satisfaction about PCA use than the control group. Conclusion: The preoperative education about PCA, customized for elderly patients could be an effective nursing intervention for postoperative pain control after total knee arthroplasty.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.4
• /
• pp.81-88
• /
• 2005

In order to estimate the gas turbine engine performance precisely, the component maps containing their own performance characteristics should be needed. In this study a component map generation method which may identify compressor map conversely from a performance deck provided by engine manufacturer using genetic algorithms was newly proposed. As a demonstration example for this study, the PW 206C turbo shaft engine for the tilt rotor type Smart UAV(Unmanned Aerial Vehicle). In order to verify the proposed method, steady-state performance analysis results using the newly generated compressor map was compared with them performed by EEPP(Estimated Engine Performance Program) deck provided by engine manufacturer. And also the performance results using the identified maps were compared with them using the traditional scaling method. When the performance analysis is performed at far away operation conditions from the design point, in case of use of e component map by the traditional scaling method, the error of the performance analysis results is greatly increasing. In the other hand, if in case of use of the compressor map generated by the proposed GAs scheme, the performance analysis results are closely met with those by the performance deck, EEPP.

• Journal of Korean Public Health Nursing
• /
• v.20 no.1
• /
• pp.5-15
• /
• 2006

Purpose: The objectives of this study was to measure the outcomes of interventions on the health and social welfare of the elderly in a rural community in Korea. The project involved integrating services of one public health center with that of one social welfare agency, which were under different administrative structures. Method: A single group pretest-posttest design was used for this research. Seventy-five elderly residents living alone in a rural community participated in the study. All of them had coverage of free basic medical care and social welfare services by the government. Major activities for the intervention included: developing partnerships among community leaders/institutes; forming committees of community residents; educating care providers and volunteers; developing 8 integrated service programs and instruments; and organizing the networks. The 20-month intervention was care-managed by a public health nurse whom collaborated with social worker, and was assisted by volunteers. The t-test was utilized to analyze the outcome variables including the elder's health, social welfare and quality of life. A major limitation of this study was the lack of a control group. Results: The outcome of the intervention was shown by improved elder's health, social welfare needs, and quality of life. Integrating the services of public health centers with those of social welfare agencies is an effective way to improve the health of the elderly in the community. Conclusion: Developing community capacity with such integrated services will pay an important role in improving the health of the elderly who live alone.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.4
• /
• pp.94-104
• /
• 2004

This study creates the LCP (Landscape Control Point) through the survey of spot sites for the quality of landscape assessment, which is based on an objective and departmentalized data base; the landscape assessment was achieved by production of weight value with the AHP (Analytic Hierarchy Process) technique, selection of requisites for the landscape assessment with the IVERSON method and visual area analysis with GIS (Geographic Information System). Futhermore, validity of the landscape assessment was verified by analysis of the correlation between physical amount and aesthetic amount. The purpose of this study is to suggest the basic essential data for landscape assessment and landscape planning by the characteristics of landscape based on verification of the suggested landscape assessment methods. The results of this study are summarized below. 1. In the adaptation of landscape assessment using GIS, the landscape assessment points of LCP 18, 17 and 16, which have more visible elements such as hill area, mountain area, and forest and farm land, were indicated to be higher than the others. In contrast, the landscape assessment points of LCP 13, 6 and 10, which have less visible elements, were relatively lower than the others. 2. In the visible preference measuring method, LCP 4, 14, and 16 showed high points of landscape assessment with 3.46, 3.4, and 3.18 each. With the more natural environments such as hill area, mountain area, and forest and farm land, higher results were shown. In contrast, LCP 7, 1, and 9 showed low points of landscape assessment with 2.24, 2.36, and 2.53 each. 3. In this study, a coefficient of 0.746 was gained by the analysis of correlation between the points of landscape assessment method and the points of visual preference from a slide show. This has 99 percent of probability in statistical data. 4. In conclusion, with the demonstration of the correlation between the landscape assessment method based on the AHP technique and the aesthetic amount (preference proportion), the practical use of landscape assessment can be demonstrated by the suggested landscape assessment method.