• 한국디지털건축인테리어학회논문집
• /
• 제8권2호
• /
• pp.47-56
• /
• 2008

The purpose of this study is to arrange the design elements and methods for sustainable community. After made the concept of sustainable community clear in the contemporary architecture and urban design, this study examines rural ecovillage, urban demonstration project, co-housing, new urbanism and urban village, and ecological township as the application modes of sustainable community. Through the cases of the application mode, the design elements for sustainable community were summarized as the followings: the symbiosis system with the nature, permaculture and edible landscape, identity, the technology for saving of resources and energy, the traffic system for the reduction of private motor use, mixed use development, and the housing with diversity. And the design methods for sustainable community were summarized as the followings: strategic planning, visioning, community action planning, workshops and charrette, environmental evaluation, and participation techniques.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.206-212
• /
• 2004

This paper is application of System Assurance(SA) for the rolling stock. As railway systems become more complex, design teams are increasingly under pressure to deliver, design solutions, which integrate both technical and Systems Assurance(SA). Systems Assurance is the application of management methods and analysis techniques to ensure that a design meets Reliability, Availability, Maintainability and Safety (RAMS) criteria. It should be clearly understood that the intent of System Assurance is not just to provide analytical techniques as a metric on performance, but more importantly it should provide a management tool with which to co-ordinate and assure the whole design. System Assurance encompasses the ongoing requirement to consider safety, and RAM through each stage of a Project, from feasibility study through to commissioning and operation. If System Assurance is undertaken properly at feasibility study at the design stages of a Project, the benefits of such analyses can be significant in identifying potential problems early enough for action to be taken before manufacture or installation. At commissioning, RAMS demonstration activities are undertaken to validate the predictive and analytical techniques undertaken during the design.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.802-805
• /
• 2003

Structural surface becomes an antenna. The integration of antennas into structural body panels is a new high payoff technology. It emerged from the need to improve structural efficiency and antenna performance. In this paper, we developed new design concept for the structural surface which transmits and receives the electromagnetic signals, and it is termed Surface-Antenna-Structure (SAS). Design procedure was presented including structure design. material selection and design of antenna elements, which was processed according to the communication with KORSAT satellite at Ku-Band (12.25-12.75 GHz). The final demonstration article was 350$\times$200$\times$7.5mm flat antenna panel. Experimental results for antenna performances were in good agreements with design requirements. Also structural analysis was performed with SAS. estimating stress distributions under simply supported condition with Laminated Plate Theories and Wavier Solutions. The SAS concept can be extended to give a useful guide to manufacturers of structural body panels as well as antenna designers. promising innovative future communication technology.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.314-315
• /
• 2018

The long-life housing certification system must have been applied more than 1,000 households apartments since 2015. The basic design guideline for the popularization of long-life housing has been developed in 2017, which include the concept of long-life housing and basic principle of design long-life housing. The demonstration project of long-life housing is be currently under construction in Sejong-si. The aim of this study is to find items on design checklist considering construction stage. The main goal is the development of design manual of long-life housing.

• 설비공학논문집
• /
• 제18권8호
• /
• pp.635-640
• /
• 2006

An optimizer has been applied for the optimal design of pipe diameters in the pipe flow network problems. Pipe network flow analysis, which is developed separately, is performed within the interface for the optimization algorithm. A pipe network is chosen for the test, and optimizer GenOpt is applied with Holder-Mead-O'Niell's simplex algorithm after solving the network flow problem by the Newton-Raphson method. As a result, optimally do-signed pipe diameters are successfully obtained which minimize the total design cost. Design cost of pipe flow network can be considered as the sum of pipe installation cost and pump operation cost. In this study, a practical and efficient solution method for the pipe network optimization is presented. Test system is solved for the demonstration of the present optimization technique.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.774-777
• /
• 1988

This paper covers the insulation coordination of 765 KV transmission line in Korea Electric Power Corporation. The design for the lightning, switching surge, and contamination was conducted to increase the reliability of 765 KV line. The authors have used the result of a limited Westinghouse ANACOM swiching surge study of the Korea Electric Corporation's 765 KV Expansion plan. The study investigated the switching surge overvoltage distribution and maximum switching overvoltage when relosing 765 KV lines. They used the technical data of the suspension insulator for the contamination design, which was available from a foreign insulator manufacture. From this paper, the authors find out that the contamination design dominates to determine the number of insulator and the SOV design dominates the air clearance in the tower. Afterwards the authors will confirm this design by Demonstration Test with Korea Electro-technology Research Institute.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권6호
• /
• pp.1007-1019
• /
• 2015

The determination of the required seawall height is usually based on the combination of wind speed (or wave height) and still water level according to a specified return period, e.g., 50-year return period wind speed and 50-year return period still water level. In reality, the two variables are be partially correlated. This may be lead to over-design (costs) of seawall structures. The above-mentioned return period for the design of a seawall depends on economy, society and natural environment in the region. This means a specified risk level of overtopping or damage of a seawall structure is usually allowed. The aim of this paper is to present a conditional risk probability-based seawall height design method which incorporates the correlation of the two variables. For purposes of demonstration, the wind speeds and water levels collected from Jiangsu of China are analyzed. The results show this method can improve seawall height design accuracy.

• 한국건설순환자원학회논문집
• /
• 제3권1호
• /
• pp.72-83
• /
• 2015

지중 송전선은 전기저항에 의한 발열현상이 늘 있으며, 그 주변의 되메움재를 통하여 열을 방출하게 된다. 따라서, 송전관로의 설계에는 발생하는 열을 주변 지반이 효과적으로 외부에 전달하여, 열적 안정성을 확보하는 것이 매우 중요한 설계 요소가 된다. 본 연구에서는 지중 송전관로 되메움재용 순환골재의 현장 적용성을 향상시키기 위하여, 순환골재의 품질기준 및 시공기준을 제시하고, 현장 실증시험을 통하여 송전관로의 열안정성을 분석하였다. 현장 실증시험에서는 순환골재 두 종류와 현재 되메움재로 사용하고 있는 모래의 열적 거동을 비교하였다. 시험 결과, 순환골재는 시간경과와 관로에서의 이격거리에 따라 온도와 함수비 변화가 모래와 유사하게 나타났다. 따라서 순환골재는 지중 송전관로 되메움재로서 일반 모래를 대체하여 적용 가능할 것으로 판단된다.

• 한국추진공학회지
• /
• 제15권6호
• /
• pp.26-37
• /
• 2011

30톤급 액체로켓엔진 연소기의 개발 기술을 바탕으로 75톤급 기술검증용 내열재 연소기를 제작하였다. 내열재 연소기의 수력학적 특성은 저유량 조건의 수류시험과 점화시험을 통해 점검하였고, 시험결과 수력학적 기능이 양호함을 보여 주었다. 정적조건의 작동성 측면에서 점화링을 이용한 측면 점화방식 역시 적합한 점화기능을 보여 주었다. 그러나 동특성 측면에서 나타나는 특정 주파수의 생성 및 소멸 현상을 이해하기 위한 면밀한 검토가 요구된다. 이를 위해서는 75톤급 연소기의 정격조건에서 연소 시험이 가능한 대형 연소시험설비가 조속히 구축되어야 할 것이다.

• 한국콘텐츠학회논문지
• /
• 제19권3호
• /
• pp.466-474
• /
• 2019

본 연구는 '교육방법 및 교육공학' 수업에서 중등예비교사에게 요구되는 창의역량 강화와 학업도전 변화를 확인하는데 목적이 있다. 이를 위해 중등예비교사 94명이 한 학기 동안 융합수업지도안 작성 및 수업시연으로 진행되는 프로젝트 학습에 참여하였다. 설문지는 지은림, 주언희(2012)가 개발한 창의적 인재 역량측정도구와 배상훈 외(2015)의 학부교육 실태조사(K-NSSE)의 학업도전 사전-사후 설문을 실시하였다. 데이터 분석은 IBM SPSS 18.0 프로그램을 이용하여 대응표본 t 검정을 수행하였다. 연구결과는 다음과 같다. 창의역량에서는 '고차적 사고력', '문제해결능력', '호기심', '감수성', '과제집착력', '사회 가치추구', '협동 및 배려'가 유의미하였다. 학업도전에서는 '고차원 학습'과 '학습전략'이 유의미하였다. 이를 바탕으로 융합교육, 융합수업을 일반화하여 수업하기 위해서는 다양한 융합수업설계, 지도안 작성, 실천연구와 반복적인 융합수업의 효과를 검증하며 수정 보완 과정의 필요성에 대한 시사점을 논의하였다.