• Journal of The Korean Digital Architecture Interior Association
• /
• v.8 no.2
• /
• pp.47-56
• /
• 2008

The purpose of this study is to arrange the design elements and methods for sustainable community. After made the concept of sustainable community clear in the contemporary architecture and urban design, this study examines rural ecovillage, urban demonstration project, co-housing, new urbanism and urban village, and ecological township as the application modes of sustainable community. Through the cases of the application mode, the design elements for sustainable community were summarized as the followings: the symbiosis system with the nature, permaculture and edible landscape, identity, the technology for saving of resources and energy, the traffic system for the reduction of private motor use, mixed use development, and the housing with diversity. And the design methods for sustainable community were summarized as the followings: strategic planning, visioning, community action planning, workshops and charrette, environmental evaluation, and participation techniques.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.206-212
• /
• 2004

This paper is application of System Assurance(SA) for the rolling stock. As railway systems become more complex, design teams are increasingly under pressure to deliver, design solutions, which integrate both technical and Systems Assurance(SA). Systems Assurance is the application of management methods and analysis techniques to ensure that a design meets Reliability, Availability, Maintainability and Safety (RAMS) criteria. It should be clearly understood that the intent of System Assurance is not just to provide analytical techniques as a metric on performance, but more importantly it should provide a management tool with which to co-ordinate and assure the whole design. System Assurance encompasses the ongoing requirement to consider safety, and RAM through each stage of a Project, from feasibility study through to commissioning and operation. If System Assurance is undertaken properly at feasibility study at the design stages of a Project, the benefits of such analyses can be significant in identifying potential problems early enough for action to be taken before manufacture or installation. At commissioning, RAMS demonstration activities are undertaken to validate the predictive and analytical techniques undertaken during the design.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.802-805
• /
• 2003

Structural surface becomes an antenna. The integration of antennas into structural body panels is a new high payoff technology. It emerged from the need to improve structural efficiency and antenna performance. In this paper, we developed new design concept for the structural surface which transmits and receives the electromagnetic signals, and it is termed Surface-Antenna-Structure (SAS). Design procedure was presented including structure design. material selection and design of antenna elements, which was processed according to the communication with KORSAT satellite at Ku-Band (12.25-12.75 GHz). The final demonstration article was 350$\times$200$\times$7.5mm flat antenna panel. Experimental results for antenna performances were in good agreements with design requirements. Also structural analysis was performed with SAS. estimating stress distributions under simply supported condition with Laminated Plate Theories and Wavier Solutions. The SAS concept can be extended to give a useful guide to manufacturers of structural body panels as well as antenna designers. promising innovative future communication technology.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.314-315
• /
• 2018

The long-life housing certification system must have been applied more than 1,000 households apartments since 2015. The basic design guideline for the popularization of long-life housing has been developed in 2017, which include the concept of long-life housing and basic principle of design long-life housing. The demonstration project of long-life housing is be currently under construction in Sejong-si. The aim of this study is to find items on design checklist considering construction stage. The main goal is the development of design manual of long-life housing.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.8
• /
• pp.635-640
• /
• 2006

An optimizer has been applied for the optimal design of pipe diameters in the pipe flow network problems. Pipe network flow analysis, which is developed separately, is performed within the interface for the optimization algorithm. A pipe network is chosen for the test, and optimizer GenOpt is applied with Holder-Mead-O'Niell's simplex algorithm after solving the network flow problem by the Newton-Raphson method. As a result, optimally do-signed pipe diameters are successfully obtained which minimize the total design cost. Design cost of pipe flow network can be considered as the sum of pipe installation cost and pump operation cost. In this study, a practical and efficient solution method for the pipe network optimization is presented. Test system is solved for the demonstration of the present optimization technique.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.774-777
• /
• 1988

This paper covers the insulation coordination of 765 KV transmission line in Korea Electric Power Corporation. The design for the lightning, switching surge, and contamination was conducted to increase the reliability of 765 KV line. The authors have used the result of a limited Westinghouse ANACOM swiching surge study of the Korea Electric Corporation's 765 KV Expansion plan. The study investigated the switching surge overvoltage distribution and maximum switching overvoltage when relosing 765 KV lines. They used the technical data of the suspension insulator for the contamination design, which was available from a foreign insulator manufacture. From this paper, the authors find out that the contamination design dominates to determine the number of insulator and the SOV design dominates the air clearance in the tower. Afterwards the authors will confirm this design by Demonstration Test with Korea Electro-technology Research Institute.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.6
• /
• pp.1007-1019
• /
• 2015

The determination of the required seawall height is usually based on the combination of wind speed (or wave height) and still water level according to a specified return period, e.g., 50-year return period wind speed and 50-year return period still water level. In reality, the two variables are be partially correlated. This may be lead to over-design (costs) of seawall structures. The above-mentioned return period for the design of a seawall depends on economy, society and natural environment in the region. This means a specified risk level of overtopping or damage of a seawall structure is usually allowed. The aim of this paper is to present a conditional risk probability-based seawall height design method which incorporates the correlation of the two variables. For purposes of demonstration, the wind speeds and water levels collected from Jiangsu of China are analyzed. The results show this method can improve seawall height design accuracy.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.1
• /
• pp.72-83
• /
• 2015

Underground transmission lines always generate heat and transmit heat through surrounding backfill materials. Therefore, in the design of power lines it becomes a very crucial factor to transfer heat effectively into the neighbouring soils. In this study, in order to enhance field applicability of recycled aggregates for backfill material of transmission lines, quality criteria and construction criteria were proposed, and thermal stability of power lines through field demonstration tests were analyzed. In the field tests, two types of recycled aggregates and sand which is currently used for backfilling were compared in terms of thermal behaviour. Test results showed that recycled aggregates represented similar trends with sand in temperature and moisture content corresponding to time lapse and distance from the heat source. Consequently, recycled aggregates can be utilized for backfill materials of underground transmission lines as a substitute material of sands.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.6
• /
• pp.26-37
• /
• 2011

A 75-tonf-class LRE(liquid rocket engine) thrust chamber with ablative material for technology demonstration was manufactured on the basis of development technologies of 30-tonf-class LRE. Hydraulic characteristics of the thrust chamber were examined through cold flow test and ignition test of low flow condition. Test result showed that hydraulic function was good. Side ignition method with igniter ring also showed a fine function of ignition in operating ways of static condition. But a close review is required to understand the phenomena of generation and extinction of specific frequencies showed in dynamic characteristics ways. To achieve these, a large combustion test facility which is capable of performing combustion test at design condition of the 75-tonf-class thrust chamber should be constructed as soon as possible.

• The Journal of the Korea Contents Association
• /
• v.19 no.3
• /
• pp.466-474
• /
• 2019

The purpose of this study was to investigate the enhancing creative competency and changes in academic challenge for the pre-service teachers. For this purpose, 94 pre-service teachers participated in project learning through the preparation of the convergence instruction and the class demonstration during one semester. The pre and post questionnaire survey was conducted the measurement of creative leader competence and K-NSSE for academic challenge. Analysis of data was performed using the IBM SPSS 18.0 program for the corresponding sample t test. The creative competency included 'higher mental thinking', 'problem solving', 'curiosity', 'sensitivity' 'task commitment', 'the pursuit of social value', and 'co-operations and considerations'. This results was significant(p< .05). Academic challenge, high-order learning domain and learning strategies domain were significant(p< .05). Based on this, in order to generalize the convergence education and convergence lesson, it is necessary to design various convergence lessons and practice study to make a plan and practice it. In addition, the implications for the necessity of correcting and supplementing the effects after repeated convergence lessons were discussed.