• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.4
• /
• pp.333-341
• /
• 2017

The Korea Atomic Energy Research Institute (KAERI) constructed the PyRoprocessing Integrated inactive Demonstration facility (PRIDE) to carry out experiments on engineering scale pyroprocessing. PRIDE has a large processing cell that human workers are not allowed to access, and thus the equipment inside is operated from outside using remote handling systems. It is therefore essential to examine the operability and maintainability of the equipment in view of remote handling systems, and the equipment is thoroughly examined in a mockup cell before it is installed in the processing cell. If the equipment is tested in a virtual mockup rather than in a mockup cell, the development cost can be significantly reduced. The PRIDE 3D simulator was integrated for virtual verification of equipment that will be installed in the processing cell. All remote handling devices in the actual PRIDE were also virtually installed in the PRIDE 3D simulator. The 3D model of the equipment was loaded and located in the exact position in the virtual processing cell. A scenario to replace an actual electrode was implemented in the PRIDE 3D simulator. The design of the equipment and the working procedures in the scenario were successfully evaluated. The results demonstrated that the PRIDE 3D simulator can be used successfully as an alternative to actual mockup testing.

• Solar Energy
• /
• v.2 no.2
• /
• pp.29-36
• /
• 1982

The Solar Energy R&D Department of KIER under the auspice of the Korean government is pushing hard on the development of the passive solar technology with high priority for the expeditious widespread use of solar energy in Korea, since the past few years of experiences told us that the active solar technology is not yet ready for massive commercialization in Korea. KIER has completed the construction of the Solar Energy Research & Test Center in Seoul, which houses the major facilities for its all solar test programs. The Center was designed as a passive solar building with great emphasis on the energy conserving ideas. The Center is not only the largest passive building in Korea, but also the exhibit center for the effective demonstration of the passive heating and cooling technology to the Korean public. The Center was designed to satisfy the requirements based on the technical and economical criteria set by the KIER. Careful considerations, therefore, were given in depth in the following areas to meet the requirements. 1) Passive Heating Concepts The Center employed the combination of direct and indirect gain system. The shape of the Center is Balcomb House style, and it included a large built-in sunspace in front. A partition, consists of transparent and translucent glazings, separates the sunspace and the living space. Since most activities in the Center occur during the day time, direct utilization of the solar energy by the living spaces was emphasized with the limited energy storage capacity. 2) Passive Cooling Concepts(for Summer) Natural ventilation concept was utilized throughout the building. In the direct gain portion of the system, the front glazing can be openable during the cooling season. Natural convection scheme was also applied to the front sunspace for the Summer cooling. Reflective surfaces and curtains were utilized wherever needed. 3) Auxiliary Heat ing and Cooling System As an auxiliary cooling system, mechanical means(forced convection system) were adopted. Therefore forced air heating system was also used to match the duct work requirements of the auxiliary cool ing system. 4) Effect ive Insulation & Others These included the double glazed windows, the double entry doors, the night glazing insulation, the front glazing-frame insulation as well as the building skin insulation. All locally available construction materials were used, and natural lightings were provided as much as possible. The expected annual energy savings (compared to the non-insulated conventional building)of the Center was estimated to be about 80%, which accounts for both the energy conservation and the solar energy source. The Center is being instumented for the actual performance tests. The experimental results of the simplified tests are discussed in this paper.

• Journal of The Korean Association For Science Education
• /
• v.38 no.4
• /
• pp.587-598
• /
• 2018

In this study, we investigated the characteristics of pre-service science teachers' curriculum design for lessons using self-generated analogy. Three pre-service science teachers at a college of education in Seoul participated in this study. After a workshop on lessons using self-generated analogy, they planned and demonstrated lessons. All of the teaching-learning materials were collected, and their lessons were observed and videotaped. Semi-structured interviews were also conducted before and after their lessons. The characteristics of lessons using self-generated analogy were analyzed in the perspectives of PCK. The analyses of the results revealed that they used various strategies to promote students' generating analogies. They lacked understanding of the stages of the lessons and the role of teachers. Although all of them considered assessment, they used limited assessment methods and assessment dimensions. Some actively considered students' misconceptions, and specifically anticipated analogies that students could generate. They determined topics for lessons considering various aspects such as the level of self-generated analogy and the characteristics of scientific conceptions. On the bases of the results, we suggest some educational implications for pre-service science teacher education.

• Spatial Information Research
• /
• v.21 no.3
• /
• pp.45-53
• /
• 2013

Web GIS, based on the latest web-technology, has evolved to provide efficient and accurate spatial information to users. Furthermore, Web GIS Server has improved the performance constantly to respond user web requests and to offer spatial information service. This research aims to create a designed and implemented Web GIS Server that is named as Nodemap which uses the emergent technology, Node.js, which has been issued for an event-oriented, non-blocking I/O model framework for coding JavaScript on the server development. Basically, NodeMap is Web GIS Server that supports OGC implementation specification. It is designed to process GIS data by using DBMS, which supports spatial index and standard spatial query function. And NodeMap uses Node-Canvas module supported HTML5 canvas to render spatial information on tile map. Lastly, NodeMap uses Express module based connect module framework. NodaMap performance demonstration confirmed a possibility of applying Node.js as a (next/future) Web GIS Server development technology through the benchmarking. Having completed its quality test of NodeMap, this study has shown the compatibility and potential for Node.js as a Web GIS server development technology, and has shown the bright future of internet GIS service.

• Journal of The Korean Association For Science Education
• /
• v.35 no.4
• /
• pp.665-676
• /
• 2015

In this case study, we analyzed the processes of STEAM lessons conducted by preservice secondary science teachers. Three preservice science teachers at a college of education in Seoul participated in this study. After the workshop for STEAM education, they planned and practiced STEAM lessons. All of the teaching-learning materials were collected before lessons, and their lessons were observed and videotaped. Semi-structured interviews were also conducted before and after their lessons. The processes of STEAM lessons were analyzed while focusing on PCK and PDC. Their difficulties, needs, and views on STEAM education were also studied. It was found that they have taken much efforts to reflect the objectives and characteristics of STEAM education, and prepared teaching-learning materials by searching on the internet and arranging creative contents. Their great difficulty was to determine topics for STEAM lessons. While one preservice teacher satisfied with her lesson perceived STEAM education positively, the others perceived that it would be very difficult to practice STEAM lessons in school. For their STEAM lessons to be successful, the workshop needs to include some specific information on grades, proper topics for each grade, ways of making materials, and tips for effective STEAM lessons. In addition, it will be effective if the workshop is carried out after their study on constructivist learning theory and if they experience successful STEAM lessons.

• Research in Community and Public Health Nursing
• /
• v.15 no.4
• /
• pp.551-565
• /
• 2004

Purpose: The purpose of this study is to develop a day care center model focused on public health institutions for the elderly residing in their homes. Method: Research design for this study was a mult-level research, which consisted of a related literature review, an Internet search for knowledge of the current situation at home and abroad, on-site interviews, questionnaires collected from a sample of residents in a rural area, and a key-informants approach. Results: 1) The subjects of service - Generalized service should be provided to the elderly, 65 years and older, regardless of their assets. 2) The contents of service - Providing pre-health oriented and post-social welfare service that can integrate and satisfy a wide variety of public health and welfare needs of the elderly would strengthen the health care service of a day care center for the elderly. 3) Delivery system - Basic-level local self-governments should become a central operating body, and establishing a properly adjusted delivery system to a rural area after considering the efficiency and the access of vulnerable rural areas is needed based on modification of 'a Special Law for Agricultural and Fishery Areas' (rural public health center>rural health sub-center ${\rightarrow}$ unified health sub-center ${\rightarrow}$ public health hospital (public health center) ${\rightarrow}$ public welfare office). 4) Facility - Public health facilities such as public health centers and sub-centers should be located in areas that can easily access the facilities. 5) Funding - For day care center for the elderly in local self-government, the central government should modify a relevant implementation of subsidy in and provide some facilities and service regardless of the degree of self reliance of local self-government. 6) Human resources - It is needed to guarantee the period of workers of a day care center for the elderly, at least 3 to 5 years, with considering their specialty on aged care and avoiding circulation based positions. Furthermore, appropriate specially trained personnel such as medical workers and social workers should be placed to take care of both health service and welfare through strengthening of 'rules of law of elderly welfare,' Conclusion: future research is needed to test the model through a demonstration study using a model which may be developed in the future and to standardize the appraisal criteria of people hoping to enter a day care center for the elderly.

• International Commerce and Information Review
• /
• v.8 no.1
• /
• pp.283-303
• /
• 2006

This is the research on the correlation between the marketing activities conducted by the companies participating in the overseas exhibitions in the exhibition and the satisfaction of the visitors. I have been able to obtain the following findings through the positive research on the satisfaction of the visitors to the overseas exhibitions. The research findings show that the external elements of the participating companies such as 'external appearances of booths, interior facilities and the atmosphere', 'designs of exhibits', 'size of the participating companies', and the publicity elements of the participating companies such as 'the degree of application of mass media', 'prior publicity of the participating companies', etc. among the marketing activities conducted by the participating companies in the exhibition affect the interest and repeat business deals of the visitors. The findings also show that the elements to induce the interest of the visitors such as the booth design and display of products where the participating companies may produce their unique image and the prior publicity to the visitors constitute the important elements of marketing. It has also been revealed that the visitors whose purpose of the visits are to purchase the products and to satisfy their interest in 'the events and contents of the events affect the interest and the repeat business deals of the visitors, among the interest and repeat business deals pursuant to the characteristics of the visitors. It has also been found that the visitors who have recognized the representative brands in the exhibitions affect the interest and the repeat business deals and the visitors who have visited the exhibition several times are more satisfied than the visitors who have visited the exhibition for the first time. The comparative evaluation of the degree of importance of the marketing activities of the participating companies before the visitors' visit to the exhibitions and the degree of satisfaction after their visit reveals degrees of satisfaction in the order of 'the booth staff's professional knowledge of the exhibits', 'foreign language proficiency and their techniques of negotiation and demonstration', 'designs of the exhibits (colors and packaging), 'prior publicity of the participating companies. Such being the case, the companies participating in any of the overseas should maximize the result of their participation in the exhibition by training their staff in the products and foreign languages and through the prior publicity. It has also been found out that "the atmosphere of the booth in the exhibition such as 'launching of new products', 'external appearances of the booth, layout of the interior facilities and the atmosphere and events of the participating companies affect the interest and repeat business deals of the visitors, among the factors for the satisfaction of the visitors. Therefore, it has been proven that the external factors such as the external appearances of the booth, display of the products, launching of new products and events producing the atmosphere of the booth of the participating companies among the marketing activities conducted by the participating companies, and the extent of the training of the booth staff and prior publicity are the major factors affecting the interest and repeat business deals of the visitors.

• Journal of Internet Computing and Services
• /
• v.16 no.5
• /
• pp.99-105
• /
• 2015

Currently robots are widely used in schools for educational purpose. With wide spread of robot-based education, it is known that major advantage of robot-based education is to enhance creativity and logical thinking of students. Although robots can be very useful tools for assisting students' study activities, there have not been lots of teaching-learning models for robot-based education.In this paper, a teaching-learning model is presented for robot-based education. The proposed model is designed based on constructivism. The proposed model consists of 6 stages: preparation, design, assembling, demonstration run, evaluation, and application & extension. The proposed model has the following characteristics. First, the proposed model is designed to enhance creativity and logical thinking ability of learners. Learners are supposed to be involved in self-directed activities and required to provide results based on their own ideas. Teachers are supposed to mediate students only if necessary. Second, learners are encouraged to participate in activity via diverse interaction. The interaction in this model includes learner-to-learner interaction, learner-to-teacher interaction, and learner-to-expert interaction. The proposed model encourages learners to solve the problem with cooperating each other. Also, teachers are supposed to guide students if necessary and observe and monitor behavior of students all the time. Third, motivation is provided in the beginning stage of the instruction. Fourth, in the proposed model, both study results and study process are equally important. In the model, study process is reviewed at the final stage.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.5
• /
• pp.61-69
• /
• 2018

Construction projects consist of long-term on-site production, and most disciplines are featured by outdoor works. Therefore, when a process plan is established, non-working days are calculated and reflected in a process schedule to comply with the planned construction period. However, necessary information and working methods are different in the course of the work, so the method of calculation varies depending on persons even for the same site, and the result is also very different. Therefore, scientific and quantitative understanding of business information is needed. This study reconstructed non-working day estimation process by collecting and organizing the information necessary for non-working day estimation, and designed the demonstration screen based on the reconstructed process and verified through expert interview at each stage. As a result, it showed about 69% reduction of work time and reliability of 92% work information matrix, and 80% of the experts evaluated the systemization of the relevant work. This study is expected to improve the understanding of work and increase the efficiency of work performance, and the study on systemization in the future should be continued.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.546-555
• /
• 2019

The purpose of this study was to improve the performance of the bogie-type crematory, which is the mainstream of domestic crematory equipment. A field scale technology was investigated via increasing the volume by changing the shape of the furnace and reducing the cremation time and saving the energy usage through the optimization of burner combustion control. First, the optimized structural design through thermal flow analysis increases the volume of the main combustion chamber by about 70%, which increases the residence time of the combustion flue gas. A designed pilot crematory was then installed and the combustion behavior was tested under various operating conditions and the optimum operating plan was derived from for each furnace shape. Based on the results, the practically applicable crematory was designed and installed at Y crematorium in the P City. Optimal combustion conditions could be derived through operating the demonstration crematory furnace. The crematory time and fuel consumption could be minimized by increasing the energy efficiency by increasing the residence time of high temperature combustion flue gas. In other words, the crematory time and fuel consumption were 38 min and $21.8Nm^3$, respectively which were shortened by 44.1 and 54.4% lower than that of the existing crematory, respectively.