In this study, we developed AMI terminals of 1 (reader): N (small transmitter). Currently, the government is focusing on the Gas AMI demonstration project to advance the outdated metering system of the urban gas industry, led by the government-sponsored ministries. The supply of gas AMI meters has the advantage of resolving uncertainties in privacy violations and measurement information and preparing for consumer safety through gas leakage detection. In the case of existing AMI meters, readers and transmitters were 1:1 methods, while this technology can be extended to multiple generations with a 1:N method, and a technology that can extend battery life by implementing a low-power design is applied. We hope that this research will contribute to the gas AMI supply project in the future.
In accordance with the industrial convergence regulation sandbox decision promoted by the Ministry of Trade, Industry and Energy, the "machine tool sharing service in the factory" applied for by MyMaker Co., Ltd., an industry-academia cooperation company, was granted a demonstration exception. While implementing this, in a situation where the ordering service part had to be developed as software, the company's domain problems were identified and analyzed, procedures were established, and a system was designed that met the related requirements. As a joint research and development project to solve the difficulties of the LINC+ industry, the order-to-order system was finally developed for shared factory services. In accordance with the procedure and requirements analysis, the planning, design, prototyping, and implementation production stages were carried out. Finally, it was confirmed that the final development contents were well implemented according to the requirements, and the resolution of the difficulties was confirmed through functional verification demonstrations.
Seok-Jun Kang;Minhyeong Lee;Jun-Beom An;Dong-Hyuk Lee;Gye-Chun Cho
Geomechanics and Engineering
/
v.33
no.1
/
pp.101-112
/
2023
When a submerged floating tunnel is connected to the ground, there is a risk of stress concentration at the shore connection owing to the displacement imbalance caused by low confinement pressures in water and high confinement pressures in the ground. Here, the effects of the boundary condition and stiffness of the joints installed at the shore connection on the behaviors of a submerged floating tunnel and its shore connection were analyzed using a numerical method. The analysis results obtained with fixed and ground boundaries were similar due to the high stiffness of the ground boundary. However, the stability of the shore connection was found to be improved with the ground boundary as a small displacement was allowed at the boundary. The effect of the joint stiffness was evaluated by investigating the dynamic behavior of the submerged floating tunnel, the magnitude of the load acting on the bored tunnel, and the stress distribution at the shore connection. A lower joint stiffness was found to correspond to more effective relief of the stress concentration at the shore connection. However, it was confirmed that joints with low stiffness also increase the submerged floating tunnel displacement and decrease the frequency of the dynamic behavior, causing a risk of increased resonance when wave loads with low frequency are applied. Therefore, it is necessary to derive the optimal joint stiffness that can achieve both stress concentration relief and resonance prevention during the design of shore connections to secure their dynamic stability.
Globally, under the leadership of advanced ICT countries, the private sector is promoting various policies to promote the digital transformation of public services. Looking at the research trend, design of public service indicators, development of evaluation system, and empirical research are being carried out steadily, but there are insufficient research cases on models in which the private sector participates in the planning, development, and operation of public services. In this study, Private-centric digital public service suitability evaluation indicators were discovered through interviews with experts in various fields, and weights for each indicator were analyzed through AHP evaluation. In addition, by applying the analysis results to 18 digital public services on a trial basis, the importance and priority of evaluation indicators for each service were derived, and at the same time, the evaluation framework was designed and applied to diagnose implications. As a result of the study, 'social utility', 'corporate acceptability', and 'public acceptability' were selected as the top three indicators of suitability evaluation. At this time, it was analyzed that the weight of the 'company acceptability' index, which includes sub-indices such as 'service profitability', 'service scalability', and 'private initiative possibility', was the highest among the three top indicators. As a result of the demonstration for public services, "IoT facility unmanned remote monitoring service", "blockchain real estate transaction service", and "digital twin disaster prediction service" were evaluated as the most suitable public services for the transition to the private sector.
Purpose - The purpose of this study is to analyze and compare the international competitiveness of digital service trade between Korea and China and to help enhance the competitive advantage of digital service trade between the two countries. Design/methodology - This paper designs and establishes a comprehensive evaluation system for the international competitiveness of the Korea-China digital service trade. By using the analytical methods of combining theory and demonstration through qualitative and quantitative analysis, this paper makes a concrete and complete theoretical deconstruction and empirical measurement of its international competitiveness from the two levels of overall competitiveness and departmental competitiveness. At the same time, the study also analyzes the competitive advantages and comparative disadvantages of the two countries. Findings - It is found that South Korea has a strong competitive advantage in the sector competitiveness of digital service trade, and the export structure is reasonable and balanced, but the deficit pattern affects the overall competitiveness. China has a strong competitive advantage in the overall competitiveness of the digital service trade. However, the structural imbalance in the export sector weakens the competitiveness of the sector. Both Korea and China have the space advantage and competitive potential to enhance international competitiveness in terms of development trends. Originality/value - This paper takes the lead in solving the pain point of the relative lack of similar research topics. It demonstrates the evolution process, development trends, and structural characteristics of the digital service trade. A new combination of competitive power research methods is innovated, and a comprehensive evaluation system is established. The above innovation points show the academic theoretical value and practical application value of this study.
The Journal of the Convergence on Culture Technology
/
v.9
no.3
/
pp.159-166
/
2023
Humanities are as crucial as the technology itself in the intelligent information society. Human-centered convergence information technology (IT), which reflects emotional and human nature, can be considered a unique technology with an optimistic outlook in the unpredictable future. Based on this research background, this paper proposed an education model that can improve the IT humanities capabilities of various learners, including elementary and secondary students, prospective teachers, incumbent teachers, school managers, and the general public, through analysis of previous studies on convergence education models. Furthermore, the practical aspects of the proposed model were closely examined so that the proposed education model could be stably incorporated and utilized in the educational field. There are seven strategies for implementing the education model proposed in this paper, including research on textbooks, teaching and learning materials, activation of research results, maker space creation, global joint research, online education operation, developing living lab governance, and diversification of self-sustaining platforms for sustainable and practical education. In the future, validity verification through expert Delphi is required as a follow-up study.
KSCE Journal of Civil and Environmental Engineering Research
/
v.26
no.1A
/
pp.35-43
/
2006
In this paper, procedures and research results involved in the development of glass reinforced composite bridge deck of hollow section were presented. Laminate design for the 3 cell deck section was performed. Structural characteristics such as serviceability, strength, failure and stability for DB24 load were analytically studied through the finite element analysis for the composite deck plate girder bridge. Composite deck tube was fabricated with pultrusion and extensive tests such as flexural test, girder-connection test, barrier-connection test, compression fatigue test and flexural fatigue test were carried out to evaluate structural behavior experimentally. Also, field load test was conducted for the demonstration plate girder bridge with composite deck and requirements for the strength and serviceability were reviewed.
Reinforced earth retaining walls were developed in France in the 1970s and began to be applied in earnest to Korea in the 1990s. And now, about 1,300 reinforced soil retaining walls support the embankment of highways and bridge connections. The reinforced earth retaining wall construction technology has evolved day by day, and in recent years the reinforced earth retaining wall itself has been developed and introduced as a demonstration. However, various damages are constantly occurring in the reinforced earth retaining walls constructed throughout the highway. The cause of this was analyzed as minor defects in the design, construction, and maintenance stages. The solution for this is a change in perception of the importance of each individual process, but this does not form overnight. In this study, 30 years have passed since the introduction of the reinforced soil retaining wall on the highway, the damage cases were analyzed and categorized that have occurred in the reinforced soil retaining wall so far, and attempted to present a confrontation. As a result, the damage occurring on the reinforced soil retaining wall was divided into 10 types, and the causes and countermeasures in the design, construction, and maintenance stages for each were derived.
The purpose of this study was to find out the effect of in-service education on the nurse-newborn play interaction. The research design adopted the pre-experimental design applied only for one pretest-posttest group and Barnard's mother-infant interaction model was used as a conceptual framework. The subjects were 26 nurses who were selected from 2 nurseries in general hospital in Pusan, and 52 healthy newborns who were after 4 days from birth during data collection period at the same hospital. The data were collected from June 1st to October 5th in 2001, by video-taping for the interactive behaviors between the nurse and the newborn, played for 5 minutes in nurseries 2 weeks before and after in-service education. The in-service education consisted of the newborn's behavior responses focused on the newborn baby's states, behavior, cues and state modulation, 3 times per 1 week, 90 minutes per 1 time, lecture, demonstration and hand out project. The experimental tool used for this research was Ha Young-Soo's Korean translation of the Maternal-Infant Play Interaction Scale by Thompson, Jody Baird, Sara Gordman, Bryant(1982), some parts of which were adapted to be suitable for the purpose of this research. Mother and baby scale by Wolke & James-Roberts(1987) was also modified and used as the criterion of nurse's perception of a newborn baby. The results of this study were as follows: 1. This result supported the major hypothesis : After the intervention of in-service education, the nurse and newborn play interaction was promoted. 2. After intervention of in-service education, the nurse perception of newborn, especially the criteria of newborn's reaction was promoted., The results of this research confirm that in-service education on the newborn's behavior responses such as states, behavior, cues and state modulation is an effective way to improve the interaction between the nurse and the baby. It elevated the nurse's sensitivities to the baby's needs. Therefore, in-service education can change the conditions of current nursing practice mostly centered on physical care into a better one in which nurses consider the emotional, social, and intellectual development stages of babies. Accordingly, in-service education contributed to promoting the effective nurse-newborn play interaction so positively.
Journal of the Korean Society for Aeronautical & Space Sciences
/
v.44
no.9
/
pp.796-805
/
2016
As a part of the first stage in the helicopter flight simulator development, this study numerically evaluates handling qualities of the dynamics model. The flight dynamics model was generated using public information for AS365 N2, the target aircraft of the simulator. The flight simulator is under development as a pilot training and research tool for firefighting missions. The assessment of the model intends to validate general characteristics and suitability before the model is enhanced with flight test data. The evaluation is based on the ADS-33E-PRF(Aeroautical Design Standard Performance Specification Handling Qualities Requirement) criteria, with consideration of category of the aircraft, missions, and environment. The numerical operations follow required or recommended procedures of flight test for compliance demonstration. Evaluation results are evaluated according to the rating specified in maneuverability ADS-33E-PRF. Results have identified to provide a satisfactory platform for flight dynamic model in the general helicopter simulator generated based on the RotorLibFDM, and can be used as a base for basic training and research.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.