• 한국실내디자인학회논문집
• /
• 제13권2호
• /
• pp.72-79
• /
• 2004

First of all corner is an essential element to consist the space, but there is not much solid study and basic concept on the corner. The most important reason is the lack of the concept on the corner. The definition of corner by itself carries the term of space. Accordingly arguing the corner in space is to characterize the space. The corner is an important element to build up the space. The purpose of this study is to give a definition on the comer in space and suggest the way of practical use. The corner in space began to transform after Cubism. Therefore this study is bounded after Cubism era. The focus of study on plastical expression properties is on the view point by each era and constitutional point of view. In conclusion, the concept of corner has been switched from the concept of structure to concept of decoration. Also, study found that the concept of corner has the ideology, medium, and characteristics of boundary.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.190-193
• /
• 2006

The definition of the Dual system is that the total seismic force resistance is to be provided by the combination of the moment frame and the shear walls or braced frames in proportion to their stiffness and the moment frame shall be capable of resisting at least 25% of the design force in Korean Building Code 2005 (KBC 2005). But, the definition of moment frame is ambiguous whether the moment frame include the imaginary columns in the shear wall (Case I) or include only the columns outside the shear wall (Case II). 60-story RC building was designed as dual system for Case I and Case II, and the required strength and reinforcement are compared. Moment and axial capacity of the shear wall of Case II decreased about 5% due to the absence of the column in the shear wall. The requirement of upper and bottom reinforcement of slab in Case II increased 13% and 40%, respectively, when compared to those of Case I. The required longitudinal reinforcement in columns for Case II is about 1.5 times larger than that of Case I.

• 산업경영시스템학회지
• /
• 제17권32호
• /
• pp.1-6
• /
• 1994

Many vehicle routing methods have been suggested, which minimize the routing distances of vehicles to reduce the total transportation cost. In describing a distribution network, we have stated that it is basically a system or a set of locations that, receive or store material plus the routes that connect these locations. Whether the network is spread over some geographic region or is whitin a single facility, the definition remains the same. Implicit in this definition, however, is that both the locations and the transportation between these locations must be considered in any decisions regarding the design of the operation of the overall network. The purpose of this paper is optimal layout using transportation quantity and distance in the total system operation. And we minimize the sum of load-carrier costs and spur costs in this flow network.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2003년도 Proceeding
• /
• pp.191-194
• /
• 2003

Product factory is a real-time financial product design system for the Internet customers. Recently, as the number of the Internet customers increases, the importance of the product factory becomes more emphasized. However, there is not much research performed regarding its definition, properties, requirements, nor implementation. In this research, we make a clear definition of product factory, and analyze the requirements of the system from the perspectives of functions and services, and we propose an architecture that reflects the analyzed requirements. In additions, we implemented a prototypical system based on the proposed architecture to prove the usefulness of this research.

• 기술사
• /
• 제32권6호
• /
• pp.77-79
• /
• 1999

This paper has the general idea and definition of product design in industrial design which creates high value added for new products. In addition, it has the relationship to be desired between the engineers and product designers, while developing the products. This paper briefly introduces the role and ability of the product design professional engineers with the best skills approved by the nation.

• Communications for Statistical Applications and Methods
• /
• 제4권1호
• /
• pp.129-138
• /
• 1997

In this paper, the problem for choosing design points in the two dimensional case is condidered. In the one dimensional case, given the design density function, we can choose design points using the quantile function. However, in the two dimensional case, there is no clear definition of the percentile. Therefore, the idea of choosing design points in the univariate case can not be applied directly to the two dimensional case. We convert this problem into an optimization problem using the Voronoi diagram.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.771-777
• /
• 1996

In this paper, an optimal design technique for a Stewart platform has been presented considering workspace and dexterity. In the definition of a design objective function, previously suggested dexterity index was used to be maximized. In this optimal design process, the workspace can be used as design constraint when necessary. An algorithm for workspace computation has been briefly described. Finally, optimal desigm results for some example cases have been presented.

• 대한기계학회논문집A
• /
• 제24권4호
• /
• pp.811-823
• /
• 2000

In design and manufacturing airframe structures which are composed of a lot of sub-assemblies and large complex profile shapes it is difficult to reduce so called hardware variations. Accordingly cost increasing factors for manufacturing airframe parts are much more than other machine parts because of the variability of fabricated details and assemlies. To improve cost and quality, accurate assembly methods and DPD techniques are proposed in this paper which are based upon using CAD/CAM techniques, the concept of KC's and the coordinated datum and index throughout the design, tooling, manufacturing and inspection. The proposed methods are applied to produce fuselage frame assemblies and related engineering aspects are described regarding the design of parts and tools in the context of concurrent digital definition. First articles and consequent mass production of frame assemblies shows a great improvement of the process capability ratio from 0.7 by the past processes to 1.0 by the proposed methods in addition to the cost reduction due to the less number of tools, reduced total assembly times and the space compaction needed by massive inventory. The need to achieve better Cpk, however, and future studies to be investigated will be addressed briefly.

• 시스템엔지니어링학술지
• /
• 제10권1호
• /
• pp.33-41
• /
• 2014

New design concept of Reactor Coolant System (RCS) including a reactor assembly for the SMR is introduced in this work. An exploration of new type of reactor that is advanced from proposed SMRs is performed by using systems engineering approach. In this point of view project structured on three main phases; needs analysis (NA), concept exploration (CE), and concept definition (CD). Main objectives as an output of the CE stage are a small size, low cost, shortening the schedule, and enhancing safety. The SMRs usually have a small size requirement. In order to meet the size requirement and to achieve a productivity, in other words, easiness to manufacture, this paper suggests an integrated PWR design concept through researching predecessors. Although the integrated PWR concept provides many advantages, it has disadvantages that composite of maintenance and a low availability problem. Therefore, this paper comes up with a run-to-fail design concept based on modular design to address the maintenance problem and to maximize the availability of SMRs as well as to be compatible with the overall-SMRs including Barge Mounted(BM)type.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.974-979
• /
• 2008

A design process for the structure-borne noise in a passenger vehicle is presented. The proposed process is improved from the previous one. The major difference between the current and last ones is that most of the countermeasures should be developed before fixing a tool for structural parts. This is requested for QCDP(Quality, Cost, Delivery and Productivity) by the design engineers. The proposed one consists of 4 steps: Problem definition, Cause analysis, Development of counter-measure and Validation. Based on the general rule: divide and conquer, the complex problem can be simplified into a few critical sub-systems through the first step: Problem definition. Secondly, the critical causes can be identified for the critical sub-systems through the second step: Cause analysis. Thirdly, effective countermeasures are investigated and produced through the third step: Countermeasure development. The proposed countermeasures are finally validated in the forth step: Validation.